Busy signal when is not

Hi
Need some help.
I got a Ipnone 5 Iso7 software, been working fine sence update.
But i got a wierd problem:
When i call my Mom & Dad i get a busy signal when there Iphone 4  Iso7, is Not busy.
i call everbody else i have in Contact, no problem
My mom & dad can call me and everboy else they have in there contact.
I have made a full factory restore, did no solve the problem.
Any seduction will be appreciated .
Robin

I read some where that if a contact is blocked, via the new ability in iOS7, that a busy signal is heard. However, I tested this and it didn't seem to be the case for me. I on my end, I heard about 1.5 rings then it went to VM.
So have your parents check to see if they have you blocked in their Contacts.
KOT

Similar Messages

  • Busy signal when faxing with hp officejet 6600 all-in-one

    I keep getting a busy signal when faxing with all numbers.

    Hi @pbr69,
    Welcome to the HP Forums! 
    I noticed that you are getting a busy signal when faxing with the HP Officejet 6600, and I am happy to help!
    I would recommend to look through this faxing guide, to make sure it is properly configured. Cannot Send or Receive Faxes.
    Also depending on the type of phone connection you are using you may require a different type of configuration. Please also see, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line, if you are using one of those types of lines.
    Hope this information helps, and have a wonderful day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

    Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

        Lmercer81,
    Thanks for the update! Let's continue to take a closer look. What model phone do you have? Do you have any bars of signal on the device? Has this effected data or text? Are you able to receive incoming calls?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Getting busy signal when calling outside USA

    When i call from US to foreign country, i get a busy signal. This just recently happened and i am unable to call anybody outside US.

    Hello,
    You are posting on the "SkypeToGo" product board but our records show that you are not registered with "SkypeToGo". Please advise.
    Thank you.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Why do i get a busy signal when calling my pre paid flip phone?

    I recently activated a old pre paid flip phone and I added minutes with a refill card on my verizon wireless account online.  It shows the payment as well as the calls I made to it  but it never lets me get through to the person.  What is the glitch?????

        I apologize for the problems you've experienced GrandmaJean. I know it's important to have your concerns addressed and resolved. We don't have access to prepaid accounts, but the number to call is 888-294-6804. Please make sure you select the correct option, but you must allow the prompts to finish before making a selection. If you don't, this may be why you're unable to get through.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Busy Signale

    Hi Everyone
    I just installed lync 2013 with exchange 2013 and for some reason i am getting alway a busy signal when i trial to call my AA , or the SA or a response group which i have configured with the DID
    I checked enterprise voice is  enabled
    The AA is enabled
    I run OcsUmUtil and configured it 
    Anyone else with the similar issues 
    Calling out is not a problem its just calling in 
    I also have my UM set up with dual startup mode

    To Fix your Issue, On the property of the dial plan within Exchange management console set the VOIP security value to "Secured" and not "SIP Secured" and it will work fine.
    Also you can refer to below link to fix your issue
    http://www.ucprimer.com/9/post/2013/10/exchange2013-um-integration-with-lync2013-fails.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

  • Busy Signal Issue.

    Busy signal when people call his number externally - Bob Jones.
    Placed user on hold and tried to call his number however it never went through and waited a good 20-30 sec each time.

    There are about 400 reasons for this. Please specify the call flow in terms of types of equipment, phone, versions, and protocols involved. Pertinent debugs (debug voip ccapi inout, h323/sip debugs) will be able to narrow down the possibilities.
    -nick

  • When using FaceTime, my iMac makes noises.  It dings like I am receiving an email and sometimes sounds like a busy signal, but this is while I am talking to someone. Any suggestions?

    When using FaceTime, my iMac makes noises.  It dings like I am receiving an email and sometimes sounds like a busy signal, but this is while I am talking to someone.  Any suggestions?

    Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
    Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
    I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
    I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
    Thanks again..
    Harv..

  • Rezound making a busy signal even when powered down

    I have had my Rezound for about a month and have liked it; even traveled across the country with no connection problems.   Then got home to the Texas hill country and it started acting up.  We don't have very good signal here but even when in Kerrville where there is 3G this happens (but not San Angelo with 4G): my phone will be sitting there by its self and will start having a busy signal.  I mess with the volume contol on the side that usually effects the ringer volume and it is now the in-call volume that does change the loudness of the busy signal.  I can make a call out and it will temporarily stop the sound, but no one can call me while it is beeping.  I went to the Verizon office, they did a factory reset, didn't fix it; they sent me a refurbished phone, trying to set it up today it did the same thing!  Is there something going on with the tower that's causing this or the software?  This is getting frustrating!  Any help or input would really help.

        Hi KvM,
    I apologize for the delay but I am here to help! You advised that your device randomly has a busy signal. Please clarify, are you on a call when you hear this busy signal? Have you recently downloaded any new applications? I look forward to hearing from you soon.
    Thank you for your contribution to our community forum,
    AyaniB_VZW
    Follow us on twitter @VZWSupport

  • IPhone 5S lost voicemail and when I tap vm icon the phone diales voicemail and gets busy signal.  No other options show.

    iPhone 5S lost voice mail and when I tap vm icon the phone dials voice mail and gets busy signal.  No other options show.
    started yesterday.  No voice mail at all.  When I tap the voice mail icon the phone immediately dials some number and that number rings busy.  I can't select anything else.   Using Virgin mobile/  I am stumped.
    I have already tried a soft boot... power and home button....
    Help!

    Other than changing the SIM card, you don't mention any troubleshooting you did with your phone.
    If you haven't already, try the following steps as needed:
    Settings > General > Reset > Reset Network Setting.
    Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    Restore phone in iTunes using a backup
    Restore in iTunes as a new iPhone
    IF the last step doesn't fix it, there is a hardware problem and you should make an appt. with an Apple Store Genius Bar. The fact that you haven't dropped the phone by no means rules out hardware issues.

  • I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

    I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

    Who is your carrier?  Are you actually on 3G?
    Do you have 3G turned on or off?  Settings > General > Network > Enable 3G

  • Macbook will not get wifi signal when docked into hedge dock station

    My Macbook will not get a wifi signal, whenever docked into the Hedge Dock Station. It will however, get the signal when out of the station. It worked for months before.

    Wi-Fi is not Bluetooth. If you are using the phone as a Wi-Fi hotspot, then you connect to it using Wi-Fi, not Bluetooth. There's no Bluetooth pairing involved.
    Turn on the Wi-Fi hotspot feature on your phone.
    On the Mac, open System Preferences and click on the Network icon.
    Select "Airport" in the left pane and then click the "Turn AirPort On" button.
    Select the name of your phone in the drop-down next to "Network Name".
    Provide the password you setup for the network on your phone.
    It's nice to have the ability to turn the Wi-Fi on and off in the menu bar rather than have to open System Preferences each time. You can click the checkbox next to "Show AirPort status in menu bar" in the Network pane to do just that.

  • Good day Friends. My phone loses signal when I receive calls and people do not listen to me at times.   I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.  Someone I can help.?

    Good day Friends.
    My phone loses signal when I receive calls and people do not listen to me at times.
      I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.
    Someone I can help.?

    nessbass wrote:
    people do not listen to me at times.
    That's not a phone issue, but rather that they simply find you uninteresting.
    nessbass wrote:
    I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.
    Amazon is not an official reseller.
    If the device has been opened by anyone other than Apple the warranty is voided.

  • HT4623 I am running iOS.7.0.4 on my iPhone 5 but do not receive any sound signal when a message is received.

    I am running iOS.7.0.4 on my iPhone 5 but do not receive any sound signal when a message is received.

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    Peace, Clyde

  • Fast busy, esp when accessing Voice Mail on FiOS Digital Voice

    When we have new messages and call into voice mail and enter passcode, the voicemail guy starts talking and all of the sudden we get the dreaded fast busy.  So then we have to hang up and try again, then get the old "I'm sorry, that account is in use".  So then we have to wait about ten minutes and try again, and this is getting very frustrating.  I called in a trouble ticket for it and nobody seems to have a clue.  In fact, while I was on the phone with tech support I got the fast busy about ten minutes into the call and didn't receive a call back, so I had to call it in all over again!  We just got FiOS back in May.  Before that we had T-Mobile @Home for our home phone, and it was rock solid and trouble-free!  So I expected a fiber optic Verizon home phone to be at least as reliable as a Linksys router with a T-Mobile SIM card in it - but boy was I wrong!  And now that TMO has stopped selling @Home I can't switch back.  Also, the Verizon voicemail is very frustrating to begin with.  The TMO voicemail system lets you listen to your message, then press 7 to delete it after you've heard it.  The VZ voicemail forces you to press 3 to delete the message while it's still playing. Otherwise, after all your messages are done playing, you have to go back and play them over again, deleting them while they are still playing.  I just cannot figure out whey they would design a voicemail system so cumbersome and frustrating.  Not to mention, TMO gave you the option of bypassing the password security when accessing from your home phone.  VZ makes you put the password in every time.  Help!  I'm sure there is someone on these boards that is way smarter than anyone I can get on the phone.  Thanks!

    We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year!  Every time I call in to report it they 'escalate' the issue but it never gets resolved.  The problem seems to be in the initial connection.  Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal.  I get the same message when I call back:  “I’m sorry – that account is in use at this time.  Please try again later!”  I have even called in with my cell phone and get the same message!  I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later.  If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.”  This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!!  I wonder how many people have the problem and just don’t bother reporting it because of the hassle?  When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!!  NEVER let them talk you into that!!!  It’s their problem and they need to fix it!!!!!!!  I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract!  Good luck if you have Verizon………

Maybe you are looking for

  • I have one modem in the house but I need 2 different networks.

    I have one modem in the house but I need 2 different networks that will not communicate or even see each other. The first network is the one that needs to be the most secure. The computers are used for personal information, documents, pictures, Apple

  • EDI Error : Condition EDI1 is not allowed as item condition

    Hi EDI Gurus, Right now I am getting the error while creating a Sales order through IDoc. "Condition EDI1 is not allowed as item condition" Clarify a few things to me: 1. Where to pass the Customer Expected Price on the IDoc. 2. How to maintain prici

  • Sample ANT-generated project

    Anyone know where I can download source for a simple project that uses ANT/XDoclet and is built, verified and deployed to the Sun Java System Application Server Platform Edition 8? Ideally, such a project would house CMP beans and an application clie

  • Synchronize

    I have been using dreamweaver cs4 since it was released and have been able to synchronize without problems until yesterday.  Now when I synchronize the full site (any site - i have tried with 10, so far), after to goes through its process and should

  • IPhone and web galleries

    I've made several web galleries via the new iPhoto and put them on my .mac site. When I go to view the gallery from my iPhone I never get past the login window. I type the password really carefully and it just gives me a new blank login window again.