But what if my Consistency Check consistently fails?

So, I've been trying to clean up my Library in preparation for installing V3.0. Each time I try to run a consistency check, the progress bar makes it about 75% of the way and then . . . . nothing. Ever. Finder does NOT report that Aperture is not responding, but nothing happens. Left overnight. Nothing. No option but to Force Quit, which I'm sure can't be good. I had sort of assumed that the consistency check should be run before / rather than a complete rebuild, no? Didn't think I wanted to rebuild a large(ish) and possibly inconsistent database. Anyone know of any way around this . . .?

Rebuilding the database actually rebuilds it from scratch, from the XML files stored for each Version and Album, so the rebuild doesn't involve your existing database at all.
If you consistently can't run the consistency check (try saying that ten times!) then rebuilding the DB would be the next step.
I would suggest that you duplicate the Library first though, just in case...
I agree. definitely duplicate your library. I had problem with the Aperture First aid as well (consistency check worked, Repair Database would stay at 0% and not move, so I rebuilt my DB and lost the library. Definitely Definitely duplicate or backup your library before you rebuild it.

Similar Messages

  • Recovery points and consistency checks are failing for one disk on file server. Access is denied (0x80070005)

     Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1 DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file
    and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial
    consistency check and recovery point creation worked as expected, however, since then it will not create another RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An
    unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery
    from the initial RP to verify that it was created properly, and that worked as well.

    Hi,
    Access Denied error is usually caused by Antivirus software.  Please disable real time scanning on the DPM Server for DPMRA process. 
    928840 You receive job status failure messages in Data Protection Manager
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;928840
    For DPM 2012 the path has changed.
    To resolve this problem, configure the antivirus program to exclude real-time monitoring of the Dpmra.exe program on the Data Protection Manager server. By default, the Dpmra.exe file is located in the following folder:
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\Bin
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Error on install: Performance counter registry hive consistency check - Status:Failed

    Hi, I'm tryng to install sql server 2008 in win vista and in the System Configuration Check, item: Performance counter registry hive consistency check has the status FAILED  all the others items has PASSED and the setup stops here theonly option is CANCEL. Thus anyone knows the possible problem and resolution to this?
    best regards

    There is another post discussing the same issue as yours.  The subject of post is:
    How to resolve "Performance counter registry hive consistency check" failed?
    Please refer that post and see if it resolves the issue.   The bottom line is that you need to rebuild the perfmon counter, correct the bad registry key hive, and then you can install SQL Server 2008.
    If the reference of post doesn’t resolve the problem, please use “regedit.exe” to export the following registry key hive to a file, and then post the file here.
    “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib”
    Once I get the file, I will try to rebuild the perfmon counter for you. 
    The tool “regedit.exe” usually exports registry keys to files with extension “.reg”.   If you post the file, please rename it to the extension “.txt” so that it can reach to the forum.
    Thanks.
    Yuhong
     

  • LMS3.1 psu problem - Consistency check failed for base package ...AG

    Hello,
    We've got a package updater problem with a LMS3.1 installation.
    1. After trying to update RME Device packages from GUI we got a message that LibCommon-v2.3.2 is needed
    2. We tried to update LibCommon from CLI using psucli.bat, see below
    3. We found a discussion in this forum, simular to this problem with the hint to reinstall the RME, what we did but with no improvement
    4. We deinstalled, reboot, did a new installation of LMS3.1. But the problem still exists, with same message. We need the PSU, because most of our devices will be managed after device package update only.
    Updating of each package brings warnings with pseudo package names, as ImageAG, MemoryAG and not with hints to real missing packages:
    C:\lms\bin>psucli -p rme -install -src C:\install\lm31-updates\ LibCommon
    WARNING: LibCommon(2.3.2):Consistency check failed for base package ImageAG
    see also the psu.log containing all tryes of package updates
    The problem goes a little bit in this direction, but with a new reinstallation as well:
    https://supportforums.cisco.com/message/669047#669047
    What can we do?
    thx for hints, Steffen

    When you install LMS on Windows, there are some recommended steps to take to ensure the installation is a problem free as possible:
    Set the per-user and global TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP)
    Disable all anti-virus software
    Disable Windows Data Execution Protection (DEP)
    Login to the server as a local Adminitrator
    Install from original, locally attached media
    NEVER abort the installation after the installer says not to
    Based on the symptoms described here, I'm guessing at least the first item was not done.  TAC has a procedure to recover a bad RME package repository, but if the base installation is problematic, doing so would be moot.  If you suspect the installation isn't 100% (beyond the package repository), uninstall, then follow the above steps to reinstall.
    If you think the problem is just with the RME package repository, contact TAC, and they can provide you a good, up-to-date repository to jump start things for you.

  • Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

    Hi
    We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
    'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
    I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
    i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
    i am stumped, any advice would be great!

    Hi
    Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261645</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
      </EventData>
    </Event>
    AND
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261646</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2034
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="49156">2034</EventID>
        <Level>2</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261649</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>FFFFFFFC</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        SPP
    Date:          21/01/2013 10:16:30
    Event ID:      16389
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying...  More info: .
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SPP" />
        <EventID Qualifiers="0">16389</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261650</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft Exchange Writer</Data>
        <Data>
        </Data>
        <Data>The writer experienced a transient error.  If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
        <Data>
        </Data>
        <Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
      </EventData>
    </Event>

  • SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

    I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
    Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
    Luckily my solution only has 10 packages.  I have verified and re-verified that everyone is set to dontsavesensitive.
    I have verified and re-verified that the solution has the protection level to dontsavesensitive.
    What on earth is going on here?  I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
    Can someone please help me out here?
    The Degenerate Dimension

    Hi MMiligan,
    Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
    So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
    If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
    protection level corresponds to the value of 0):
    DTS:ProtectionLevel="0"
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Fileserver consistency checks failing 0x809909B0

    I have a file server with approx. 1.7TB of files which became inconsistent on the 8<sup>th</sup> of November, and has been unable to complete a consistency check since then. 
    Consistency checks fail with the error:
    The protection agent on <server> was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
    I have removed and re-added the server, including deleting the protected data from DPM disk, and reinstalled the DPM agent on the file server, but I still receive the above error when consistency checking. 
    DPM is System Center 2012 R2 v4.2.1254.0 on Windows Server 2012 R2. 
    The file server is running Windows Server 2012 R2 also. 
    KB2919355 is installed on both systems.
    I did have Dedup running on the file server, but have un-deduped the drive as part of troubleshooting this issue.
    Other servers backed up by this DPM server are being backed up fine, including a HyperV cluster, 2 exchange servers and 2 sharepoint farms.
    There are a large number of these errors in the DPMRA log around the time the job fails:
    5288       4F48      
    11/28     22:49:56.601      
    29          
    radefaultsubtask.cpp(355)          
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {EB6F4726-E5C5-4958-B034-542518E5A931}
    5288       4F48      
    11/28     22:49:56.601      
    05          
    defaultsubtask.cpp(546)              
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand, pOvl)
    5288       4F48      
    11/28     22:49:56.601      
    05          
    defaultsubtask.cpp(751)              
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   Subtask failure, sending status response XML=[<?xml version="1.0"?>
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RACancelAllSubTasks" CommandInstanceID="8a514c9b-6a62-42b4-a03b-0f938e3f20cc"
    GuidWorkItem="eb6f4726-e5c5-4958-b034-542518e5a931" TETaskInstanceID="50c1500f-0353-4d2a-8188-fc03612e2503"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
    DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="DPM01.domain.com"/></ErrorInfo></Status>
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   ]
    I have also tried the steps in this article with no change:
    https://social.technet.microsoft.com/Forums/en-US/107bdce0-e13c-427a-9341-07d4b558f007/dpmra-crashing-after-update-to-dpm-2012-r2-ur2
    Currently I have reduced the amount of shares being backed up to just ~400gb of data and I have it in a consistent state, but I need to get the remainder of the data backed up, and I can’t be in a situation where if it becomes inconsistent it can’t run a
    successful consistency check again.

    Hi,
    If you want to pursue this immediately, you can visit the following web site to open a support incident. The charge to your CC will not be processed until your case is resolved and closed, if it's a code defect in the DPM then we wave all charges.
    http://support.microsoft.com/select/Default.aspx?target=assistance
    In the Quick product finder, enter:System Center 2012 R2  - then select System Center 2012 R2 Data Protection Manager
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

    Hi Guys,
    I'm having some issues updating the device packages for my RME 4.3.1 install.
    I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
    I pulled up the PSU.log and found the following:
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CM already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : _CURDFMVER=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : DFMVERSION=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Locking package repository..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Checking Dependencies...
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages]  : SharedSwim2900XL has 17 dependent packages
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageParserAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedDcmaIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[DistributionAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibSwim] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibSwim
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimJobOptionsAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SoftwareAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ConfigAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibCommon] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibCommon
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SystemAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageListAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ContainmentAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[FlashAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[MemoryAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[RemoteStageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimCCOAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedSwimIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedSwimIOS
    [ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest]  : No packages to pick ..Empty package set passed .
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : populateResolverResult]  : All selected packages failed consistency check..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Packages selected for install (satisfies consistency check) : []
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: No packages to be installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages]  : Releasing lock...
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Number of Events Loaded in init()6
    Before i started to bug TAC, I figured I'd post this here.
    Let me know your thoughts

    Looks like your package repository has been corrupted.  TAC can provide a procedure  to recover from this corruption.  The following DOC indicates  why this can happen and has suggestions on how to avoid these problems  from re-occuring.

  • How to resolve "Performance counter registry hive consistency check" failed?

    I want to install SQL Server 2008 November CTP Developer Enu. When "System Configuration Check" it shows:
    Rule "Performance counter registry hive consistency check" failed.
    The performance counter registry hive is corrupted.
    And cannot continue installing. How to solve this problem?

    I've actually solved the problem for my Vista and Win 7 (traditional chinese version).
    After revising %systemroot%\system32\WmiApRpl.ini:
    "[info]
    drivername=WmiApRpl
    symbolfile=WmiApRpl.h 
    [languages]
    004=Chinese (Traditional)
    009=English
    [objects]
    WMI_Objects_004_NAME=WMI Objects
    WMI_Objects_009_NAME=WMI Objects
    MSiSCSI_ConnectionStatistics_00000_004_NAME=iSCSI Connections
    MSiSCSI_ConnectionStatistics_00000_009_NAME=MSiSCSI_ConnectionStatistics
    MSiSCSI_InitiatorInstanceStatistics_00001_004_NAME=iSCSI Initiator Instance
    MSiSCSI_InitiatorInstanceStatistics_00001_009_NAME=MSiSCSI_InitiatorInstanceStatistics
    MSiSCSI_InitiatorLoginStatistics_00002_004_NAME=iSCSI Initiator Login statistics
    MSiSCSI_InitiatorLoginStatistics_00002_009_NAME=MSiSCSI_InitiatorLoginStatistics
    MSiSCSI_MMIPSECStats_00003_004_NAME=iSCSI HBA Main Mode IPSEC Statistics
    MSiSCSI_MMIPSECStats_00003_009_NAME=MSiSCSI_MMIPSECStats
    MSiSCSI_NICPerformance_00004_004_NAME=MSiSCSI_NICPerformance
    MSiSCSI_NICPerformance_00004_009_NAME=MSiSCSI_NICPerformance
    MSiSCSI_QMIPSECStats_00005_004_NAME=iSCSI HBA Quick Mode IPSEC Statistics
    MSiSCSI_QMIPSECStats_00005_009_NAME=MSiSCSI_QMIPSECStats
    MSiSCSI_RequestTimeStatistics_00006_004_NAME=iSCSI Request Processing Time
    MSiSCSI_RequestTimeStatistics_00006_009_NAME=MSiSCSI_RequestTimeStatistics
    MSiSCSI_SessionStatistics_00007_004_NAME=iSCSI Sessions
    MSiSCSI_SessionStatistics_00007_009_NAME=MSiSCSI_SessionStatistics
    ProcessorPerformance_00008_004_NAME=處理器效能
    ProcessorPerformance_00008_009_NAME=ProcessorPerformance
    Video_Scheduler_Statistics_00009_004_NAME=Video Scheduler
    Video_Scheduler_Statistics_00009_009_NAME=Video_Scheduler_Statistics"
    I have realized that the code 009 is for english language and 004 for chinese traditional and in my "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Perflib" did only exist 009 and 0404 key.
    Hence, i've created a new 004 key and copied 009 counter and help contents to this newly created key.
    Without restarting the OS, I was able to install smoothly MS SQL server express RC2.
    I'm so happy to have overcome this problem.
    But just out of curiosity does anyone know the syntax for the language codes? (009 for English, 004 for Chinese and 0404?

  • Process chain failed - Consistency check

    Hi all
    we are executing a process chain of consistency check. It has been failing every day.
    "Internal session terminated with a runtime error (refer to ST22)     "
    Could you please guide me what might be the reason.
    Thanks
    Deepali

    Hello,
    It might be many reasons.
    First thing is access transaction ST22 and analyze the DUMP raised on the process chain error.
    Check for that.
    In case you do not understand the DUMP let me know what kind is it and I will try to help you further.
    Regards,
    Michel Bohn

  • LMS3.1 psu problem - Consistency check failed for base package

    Hi all,
    I tried to install the following packges for CiscoView 6.1.9:
    Rtr2900.cv50.v2-0.zip
    Rtr3900.cv50.v2-0.zip
    but it gives me the following error:
    Consistency check failed for base package NGMARShare
    There are no Packages to be installed.
    I uninstalled all packages and installed them again after I copied these two packages in the packages sources folder but it failed again.
    Any one can help?
    Thanks

    the new package you try to install depends on a package that you don't have
    DEPENDENT PACKAGE
    =================
    DtShare V1.5 (DtShare.cv50.v1-5.zip)
    this can be seen from the error message you got
    "Consistency check failed for base package DtShare"
    my advice is to read the "Release Information" for the packages you try to install
    you can find the Release Information in the same page of the download.
    hope this helps,
    also it's better to update all the device packages if your server have internet connectivity from CS > Software Center > device update.

  • -- Failed consistency check for this level

    Hi guys,
    I'm trying to validate a hierarchy, however, 1 level fails with that error message:
    Level Name --> Failed consistency check for this level
    I checked the column on physical layer - it has the same name and same datatype as the one in DB. The nullable flag is checked (there're no null values anyway). At the logical level - the key is created and it's the only level key at this level.
    What could be a cause?
    Thanks

    Thomas,
    since you've seen this before....did you have a problem doing "Estimate Levels" when you had measures in the hierarchy (usually they get there when you select a level for measure in its settings). I suspect the problem is in the measure - using FILTER function which references the dimension.
    Thanks

  • " -- Failed consistency check for this level" when doing Estimate Levels

    Hello again,
    When you run "Estimate Levels" and you get "<-- Failed consistency check for this level"
    What does it really mean? Can this break, because of NULL values in logical keys? Or perhaps anything else? Thanks
    Thanks

    Thomas,
    since you've seen this before....did you have a problem doing "Estimate Levels" when you had measures in the hierarchy (usually they get there when you select a level for measure in its settings). I suspect the problem is in the measure - using FILTER function which references the dimension.
    Thanks

  • Time Dimension Consistency Check Failed

    Dear all,
    Got a issue..
    A cube which is found to be active in RSA1, but when we do the consistency check for time dimension in the transaction RSRV, we get the following error.
    Unknown, profound errors with instance creation in test "CL_RSRV_CHK_TIM_DIM"
    Pl help to resolve this issue.
    Thanks,
    Ramya

    Hi Ramya,
    Welcome to SDN...!!
    Check with the Correct Error option in RSRV after selecting testing ur cube.
    Best Regards,
    SG

  • Cluvfy : Time zone consistency check failed

    Hello All,
    Env: 112.0.3 on Linux 5.8
    Single node RAC
    I 'am trying to add another node to my cluster.
    When i run the cluvfy it shows
    cluvfy stage -pre nodeadd -n a0002 -fixup -verbose
    o/p trimmed
    Oracle Cluster Voting Disk configuration check passed
    Check: Time zone consistency
    Result: Time zone consistency check failed
    The `date` on both the servers shows UTC as the timezone and they sync
    a0001:oracle(ps1) ~ % ssh a0002 date;date
    Thu Oct  3 06:28:13 UTC 2013
    Thu Oct  3 06:28:13 UTC 2013
    cat /u01/app/11.2.0/grid/crs/install/s_crsconfig_a0001_env.txt
    TZ=UTC
    NLS_LANG=AMERICAN_AMERICA.AL32UTF8
    TNS_ADMIN=
    ORACLE_BASE=
    Where does the script check for this?
    TIA,
    John

    Thx Anar for stepping by..
    rm -rf /tmp/cvutrace
    mkdir /tmp/cvutrace
    export CV_TRACELOC=/tmp/cvutrace
    export SRVM_TRACE=true
    export SRVM_TRACE_LEVEL=1
    <STAGE_AREA>/runcluvfy.sh stage -pre crsinst -n <node1>,<node2> -verbose
    i enabled tracing on cluvfy and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.
    and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.

Maybe you are looking for

  • Follow-up opportunity from quotation

    Hi Experts, I am using a quotation to create a follow-up opportunity. for this I am using TXN 'CRMD_BUS2000112'. using transaction type 'ISU service quotation'. now after processing it ...I want to check whether quotation data has been transferred to

  • Reports using JPG and BLOB RenderOp failures

    I am getting RenderOp failures using BLOB columns to store JPG images in reports. Reports seems only to work if the data is in TIFF format (massive storage req.) I have converted to LONG RAW to store the JPG images and the same report functions perfe

  • Problem with iDVD '08

    When I try to create a new project, the program says "Your Macintosh does not have a supported SuperDrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc." As far as I was aware, I have a D

  • Im having difficultie downloading Itunes 10 to my Windows 8 OS on an HP laptop computer can someone please help me. Thank you in advance.

    I am attempting to download ITunes on my new computer which is Windows 8 OS. Unfortunately I continue to get an error indicating that the app could not be downloaded, another time it was only partially downloaded, I turned off the firewall and that s

  • Crystal reports 2011 failure to pull the master data for AP Items

    I am using businessobjects 4.0 and i am also running crystal report 2011.I am connecting to a sap erp ecc 6.0 ehp4 without any issue.The challenge comes when trying to input or pick the master data for example company code .The crystal report does no