Buting Center in Opportunity Management

Please inform me in anybody work on opportunity Management in mySAP CRM. Our requirement is the partners maintain in Partner tab of opportunity needs to flow on buying center Tab Page.
But we were not able top find out any BADI or Function Module regarding the same. So never aware for completing this functionality do we need to write down any code or is there any configuration is available for the same. Please inform me in anybody work on opportunity Management in mySAP CRM. Our requirement is the partners maintain in Partner tab of opportunity needs to flow on buying center Tab Page.
But we were not able top find out any BADI or Function Module regarding the same. So never aware for completing this functionality do we need to write down any code or is there any configuration is available for the same.

Hi,
I have not worked with the Buying Center, but...
It sounds as if you need to work with your Partner determination procedure, which determines how partners are determined e.g. copied from one transaction to the next.
Have a look at the Partner determination procedure for your transaction in:
SPRO - CRM - Basic functions - Partner Processing - Define Partner Determination Procedure
Hope this helps!

Similar Messages

Changes in crm2007 opportunity management?

What are the changes related to opportunity management when we upgrade from crm5.0 to crm2007?

Hi,
you will find these things are new:
-Graphical Maintenance of Buying Center
-Copy Buying Center to Account to store as template
-Download Buying Center Template from Account to Opportunity
-Quotation Creation through Template in MS Word
-Partner Re-Determination anytime during an opportunity
-Opportunity Assessment based on Expected Sales Volume (e.g. certain assessment if over $1,000,000)
-Tracking of competitor products and prices
Of course the opportunity is also much easier to use due to the new UI layout without tabs.
Regards,
Tim

Buying Center in Opportunity of mySAP CRM

Hi,
Please inform me in anybody work on opportunity Management in mySAP CRM. Our requirement is the partners maintain in Partner tab of opportunity needs to flow on buying center Tab Page.
But we were not able top find out any BADI or Function Module regarding the same. So never aware for completing this functionality do we need to write down any code or is there any configuration is available for the same. Please inform me in anybody work on opportunity Management in mySAP CRM. Our requirement is the partners maintain in Partner tab of opportunity needs to flow on buying center Tab Page.
But we were not able top find out any BADI or Function Module regarding the same. So never aware for completing this functionality do we need to write down any code or is there any configuration is available for the same.
If anybody work on this please let me know.
Regards,
Vrushali

hi, for partners to flow to the buying center you need to just configure. no need to write code.
I will let you know the transaction path and the way in a day.
thanks,
vivek

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

Work center in solution manager

Hi,
In the work center of solution manager, while trying to create job documentation : [https://websmp107.sap-ag.de/~sapidb/011000358700001975992008E/index.htm] from a change request the final step is to assign a logical component. When I click on the logical component icon my logical component list doesn't show up even though its maintained in the system. Is there some configuration involved?
Thanks,
Esha

Hello Esha,
if I understood your issue correctly your creating the Job Documentation from the Job Change Document (transaction type SDCD) -> you are using the ChaRM integration, right?
In that case you'll have to check IBase assigned to the Job and Change Request: The IBase has to point to a production system.
The program also filters for logical components having the (logical) System, i.e. combination of System ID and Client, of the assigned IBase, assigned in the role production.
-> So you need a logical component which includes the selected system (see IBase) in role production.
Regards,
Martin
Please follow us on SDN:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/25168834 [original link is broken] [original link is broken]
/people/martin.lauer/blog
and SAP Service Marketplace:
http://service.sap.com/jsm

Interesting SCOM Reports and "Microsoft System Center Virtual Machine Manager 2012 R2 Reports" MP Issue , Some reports appear others don't

Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
with scvmm and I’m having issues with the chargeback reporting.
I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.

Hi,
Hope the below link could be helpful:
Enabling Chargeback in a Service Provider Cloud by Kristian Nese
http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
Regards,
Yan Li
Regards, Yan Li

Populating Status field in Opportunity management

Hi All,
I need to populate my own values in Object status list box in opportunity management(CRMD_BUS2000111).Is there any way to fill these values.It would be great helpful to me if u have any solution for this

hi Rekha,
just create a new status profile via like Rekha said : SPRO -> SAP Reference Image -> CRM -> Transaction -> Basic Settings -> Status Management -> Define Status Profile for User Status
just create new status profile and fill the status that you like to have.
don't forget to choose the object types CRM Oder Header for the new status profile.
and save it
after that you need to assign the new status profile to your opportunity transaction type and save it.
after that try to testing it, i think it will works
hopes it helps
cheers

System Center Virtual Machine Manager 2012 R2 trial ISO - Technet Evaluation Center

Hello,
I have checked the Technet Evaluation Center for the System Center Virtual Machine Manager 2012 R2 - 180 days trial ISO but nowhere to be found.
I see that Microsoft has put a eval VHD on the following URL: http://www.microsoft.com/en-us/download/details.aspx?id=40843.
Microsoft: Can you please upload the: System Center Virtual Machine Manager 2012 R2 iso 180 day trial to the Technet Evaluation Center since you have cancelled the technet subscribtion :)
Thank you in advance
//Robert Diego

Hi Sir,
System Center products were gathered in System Center products , you can download 12R2 VMM :
http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to enable microsoft system center virtual machine manager Management Pack IP Pool monitoring

How to I enable how to enable IP Pool monitoring in the Microsoft System Center Virtual Machine Manager Management? The IP Pools show up in the IP Address Pool Health dashboard, but the state is "Not Monitored". How to I get these to light up
as monitored?

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Authorization - Sales Manager: Lead Management / Opportunity Management

Hi Portal Gurus,
As per our requirement, in the 'Sales Manager' role, under 'Sales Cycle', we need to provide only 'Lead Management' for one set of users and 'Opportunity Management' for another set of users and both for other set of users.
What would be the best way to do that. Thanks in advance for your help!
- Jas

Hello Jasendu,
The best way to implement this is to maintain a single Sales Role with all the sub catagories ('Lead Management' , 'Opportunity Management' ) and apply role filtering concept according to the users. That way you need to maintain a single Sales role. Check out the below blog for more details abour role filtering.
Filtering Role Content by User Attributes
Or else, you can create three different roles, one for each 'Lead Management' , 'Opportunity Management' and other containing both of them and assign to users accoedingly.
Regards
Deb
[Reward Points for helpful answers]
Message was edited by:
Debasish Sarkar

Planned Activites in opportunity managment

Hi Experts,
I am working with CRM 7.0 . In opportunity managment I find two assignment blocks 'Planned Activites' and 'Completed Activities'. When I create a Follow up activity . I find the activity in my 'Planned activities' assignement block. Now when I click the action corresponding to the activities. The activity moves to the 'Completed Activities' assignment block. But to my suprise there is no change in status of the Activity.
Is this the standard behaviour or I need to do some customization regarding this ?. Could you please then explain what is the use of the action link in both the 'Planned and Completed Activities'.
Thanks in advance.
Subhashis

Hi Robert,
Thanks for replying. You are right saying that the change from planned to completed activity in opportunity management is dependent on the system status. Only the system status is updated to 'completed' for the activity when I click the 'Close' Action.
But I am wordering what could be the business case to set only the system status in this case ? is there any way to set both the statuses ?
Regards,
Subhashis

Lead and Opportunity management

Dear all
I am new in CRM.
Can anybody send me the documents abt lead and opportunity management?
pls it very helpful for me
jayesh patel

Lead in CRM Online:
http://help.sap.com/saphelp_crm40/helpdata/en/2a/f31f2c6127e24199df72d17fb014ea/frameset.htm
http://help.sap.com/saphelp_crm40/helpdata/en/6b/30453cf1fcc85ee10000000a11402f/frameset.htm
Opportunity in CRM Online:
http://help.sap.com/saphelp_crm40/helpdata/en/24/bc239801e28940a34545863fe45a6f/content.htm
Hope this helps.
Regards,
Kaushal

Microsoft System Center Data Protection Manager

Hi,
I have two DPM (2012r2)servers, one is member of the domain, second is workgroup configuration.
I installed Microsoft System Center Data Protection Manager, I have no problem connecting to DPM domain member.
Can I connect to the workgroup DPM server with System Center Data Protection Manager?
Thanks,
Lior

Hi
The DPM server itself must be a member of a domain. DPM will not work if the server is in a workgroup configuration.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Is opportunity management available in the Standard Edition ?

Is opportunity management available in the Standard Edition (100$) of Fusion CRM(Sales and Marketing) cloud version?
Also, is Fusion Base CRM same as the standard edition or does it refer to something else ?
Thanks
Nakul

Yes, opportunity management is included. CRM Base is the same as the Standard Offering.

Buting Center in Opportunity Management

Similar Messages

Maybe you are looking for