Button "change" disappers in BSP degree audit

Hi,
I find the following strange behaviour in BSP degree audit, when I want to change an existing but not released degree audit run.
1. When I select the student in the BSP application and list the audit runs for a study program, the application shows correctly five buttons: "create", "change", "display", "delete" and "cancel". Four of them are greyed correctly, as no audit run is selected yet.
When I now select an audit run, the buttons "change", "display" and "delete" disappear, so I can not change or delete the audit run anymore. To me, this behaviour seems not to be correct.
2. When I create a new audit run in this situation, no "save"-button appears. This also seems not to be correct.
Can anybody reproduce this behaviour as well? Is this a bug?
Thank you
Andreas Born

Unfortunately this comes not out-of-the-box. Remember you are in a web browser and not in SAPGUI. If you need it you can do one of two things:
1. develop such a tool by yourself
2. check out the possibilities WebDynpro for ABAP offers you (available as of SAP NetWeaver 7.0).
Regards,
Volker

Similar Messages

Hide button save on page bsp hap_document.html

Hello,
Do you know if there is a way to hide the button 'save' in the appraisal document page ?
There is a BADI ?
Regards,
Aurélien

hello,
you have to change in the BSP page to hide the button....
I think that is only way..
Thanks.

Email Submit Button - Change Text/Confirm submission

I have an Email Submit Button on my survey, which I am 'distributing'. I would like for it to do 2 things once you click on the "Email Submit Button":
1) Text of the button changes once it been clicked on in order to show that the survey was submitted. Right now, all I can figure is how to have the text change when you roll over the box or for the secnod you click on the box-- i want the caption to change once its been clicked.
2) a text box appears below that can act as a "thank you for submitting your survey...".
any help and advice is much appreciated!

Thanks for the response Paul. I feel like i'm very close, but I'm still not there... I'm not sure where to enter this javascript you sent me. The only script I know to find is the XML Source ...if that's the right place, where do I enter your code?
<field name="Button1" y="241.3mm" x="66.675mm" w="73.025mm" h="9.525mm"><
ui><
button/></
ui><
caption><
value><
exData contentType="text/html"><
body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:APIVersion="2.5.6290.0">simply CLICK HERE to submit via e-mail</body></
exData></
value><
para vAlign="middle" hAlign="center" spaceAbove="0pt" spaceBelow="0pt" textIndent="0pt" marginLeft="0pt" marginRight="0pt"/></
caption><
border hand="right">
<?templateDesigner StyleID apbx2?>
<edge stroke="raised"/><
fill><
color value="212,208,200"/></
fill></
border><
bind match="none"/></
field></
subform>

Can i make a button change anchor link when you scroll down the site?

I am trying to make a scroll site.. and i have navigation buttons on the right, a full menu, but also a "1 topic up" button and "1 topic down" button.
Is there any way that i can have those buttons change anchor link when you scroll down the site.
Example:
I am at home, then i press "1 topic down" and gets scrolled to the next topic on the website, but then i cant make the button change to link to the anchor below that, so the button becomes useless after that 1 press.
Is that in any way possible in Muse to make it change link?

Hi
You can try to create different buttons on page positions where down scrolling will be active with separate button actions. For example you click on "I topic down" , page scrolls and there is another button placed with "Next Topic down" , on click this would scroll the page more and similarly along the length of page.
Button with anchor link scrolling down the page cannot be used for different anchor links, creating different buttons with anchors is the solution.
Thanks,
Sanjit

Degree audit cookbook and best practise

At Freie Universität Berlin we started implementing SLCM degree audit for the graduation processes of our study programs and face now the challenge to educate our administrators in usage of the tools to define the appropriate requirement catalogs. We are using Version 6.0 of CM.
Since degree audit is a complex process to be customized and enhanced by BADI implementations and objects (rule containers containing requirements) we asked SAP for documentation usable for training administrators with erperienced SAP-CM-knowlegde in other areas.
It seems that such a documentation does not exist yet, neither in help.sap.com nor in the SND-marketplace, so we are now to ask the highered-BPX-Forum.
We search for general documentation and how-to-Documents (cookbooks) about:
- setting up requirement patterns, requirement catalogs (and versions of them), selectors, filters, figures and performance indices to model the requirements of a given program and anchoring them to the academic structure;
- If there exists a graphic of a "database scheme" which illustrates the dependencies of the objects used in degree audit this would also be helpful.
Can anyone point us to such documentation?
We would also like to be pointed to/share knowledge about:
- best practices in the pragmatics how to compile study regulations into requirement catalogs using the given objects, BADIs and SPRO yielding both: accuracy and maintainability;
- How-tos about enabling enterprise services assignable to business roles or automatic procedures and composable to an example process including
   - the assignment of requirement catalogs to student's study;
   - the creation of requirement profiles for candidates;
   - starting and saving audit runs;
   - propagating their results to internal qualifications;
   - completing degree.
Regards,
Dirk Pape
Dr. Dirk Pape (eAS - Projektleitung Campus Management)
Freie Universitaet Berlin
Grunewaldstr. 34a, 12165 Berlin
Tel. +49 (0)30 838 75143, Fax. +49 (0)30 838 54654

Michael,
As of this writing, I was only able to successfully retrieve the files with IE. Firefox 2 is being given empty files.
Thanks,
Eric
P.S. Thanks for making this available. And, thanks to Volker for his work on it.

Play Button Changes Color To Red, Can I Change It?

In the Sliding Planes theme, when I preview, the Play button (originally dark blue) turns red. It has to be something set in the theme since other themes have a change in color of the Play button as well (sometimes to yellow and other colors). Is this changeable? I would rather the color not change and stay dark blue. Thanks a lot!

Ok, I think you answered my question. I just want to make sure you know that it's not the highlighting persay that I'm talking about, it's just the fact that the button changes and stays to red, it's not that it only gets red when you're selecting it but that once the menu starts and the text flies in and the drop zones are in motion the top writting and everything is the color I want but the Play button turns red automatically before I select it or anything. But I think you answered my question in that the theme I selected requires the Play button to turn red automatically to distinguish it from other buttons. I wouldn't mind it turning red when I would press enter or something to play, like for a second to change color to know that I cliked it, but what bothers me is that it's red the whole time which off sets the color scheme that I'm trying to make on the menu. Thanks again

Degree Audit Callup Point and Structure View of RC's (PIQRULEWB_AC)

Hello,
I have linked a rule container to an academic object (type SC, in this case), via callup point 60 (degree audit). When I am in the structure view looking at this, I notice that the popup text over the callup points icon says "Non-Academic Callup Pnt". I have read a VSR cookbook, and was under the impression that RC's linked to academic objects would have academic callup points. Am I looking at a bug (SAP GUI client 710; server 4.72), or do I have a misunderstanding about the degree audit callup point?
Thanks,
Eric

Hi Eric,
actually the use of Rule Containers and Callup-Points in Degree Audit is a bit different than how it is used for the academic processes. While you define particular rules like prerequisites using the VSR rule elements for callup points within activities like module booking or admission, in Degree Audit the rules in the rule containers are "collected" to build the audit profile for the student. Also the concept of academic and non-academic callup points does not really apply to the use callup points for audits.
I would not necessarily consider it as a bug that the display shows the callup-point as "non-academic" - however it could be a bit confusing and I suggest that you sent a low priority OSS message such that our development can review whether they could make that a bit clearer to the end-user.
Regards
Joachim

Event to handle radio button changed in a dynpro

Hi Everyone,
how can i handle if a radio button changes in a dynpro?
I want to disable other buttons if a radio button is selected
Thanks

Hi ,
you can do that..
first group the radio buttons in the screen and assign function group for each radio button by double clicking ..
and write the logic enable and disable fields in the screen in PBO
regards,
Prabhudas

Button changes style when connected to Application Manager

I've connected the standard axButtons to the application manager in a custom OI built in CSharp using Visual Studio 2008. When I run the OI, the buttons change from the standard style (rounded edges, etc.) to what looks like a classic style (squared edges, no color gradient, etc.). At first I thought this might be a limitation of CSharp, but when I ran the executable CSharp UI (shipped with Teststand), the buttons look correct. Is there a reference that I've not added or something? I've followed (pretty much copied) the code found in the full-featured CSharp UI, leaving out functions that I didn't need.
Below is the only real code involving the two buttons. It's pretty simple so I imagined it's a project property that I've setup incorrectly. I've also included the namespaces I included.
Thanks for any help
using NationalInstruments.TestStand.Interop.API;using NationalInstruments.TestStand.Interop.UI;using NationalInstruments.TestStand.Interop.UI.Support;using NationalInstruments.TestStand.Utility;
// Connect Sequence Controls this.axSequenceFileViewMgr1.ConnectCommand(this.axEntryPoint1Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 0, CommandConnectionOptions.CommandConnection_NoOptions); this.axSequenceFileViewMgr1.ConnectCommand(this.axEntryPoint2Button, CommandKinds.CommandKind_ExecutionEntryPoints_Set, 1, CommandConnectionOptions.CommandConnection_NoOptions);
Solved!
Go to Solution.

Scott, once again, thanks for your help. I've tried several things relating to this manifest file, all to no avail. First, I tried pasting the lines you mention into the <program>.vshost.exe.manifest file (the vshost file was the only manifest file that I could find, is this the correct one?)--no change. In the "Application" tab on the project properties, I can select create w/o manifest or embed manifest. I tried both, but from this point the original manifest file was deleted during the build process and did not show up anymore.
The project includes the windows common buttons as well as the teststand .NET controls. I assume this would accomplish the lines you mentioned, but I am a .NET newbie so I could be wrong there.
I've attached a 2008 C# Express project which includes no code, only a windows common button and a teststand button on a form. When I run this program, I see the same behavior. Can you take a look at this, and let me know if you see the same behavior?
Thanks,
Shawn
Attachments:
TS_Control_Test.zip ‏62 KB

Weblogic console - the button "change & lock" is missing

I just installed weblogic 10.3.5 server in my PC, and found in weblogic console, on the left pane – Change center, the button “change & lock” is missing. How could I get the button back?
Thank you very much!

Click in the admin console on Preferences, User Preferences and uncheck Automatically Acquire Lock and Activate Changes.
Than the Lock&Edit button will appear.

XFCE - Taskbar / Clock / "Window Buttons" plugin rotated by 90 degrees

Hello all,
Back then I solved somehow on XFCE 4.10 that Window buttons were showed properly, not rotated by 90 degrees on XFCE when I put the panel on the right side. Now I can't find it how did I do it and also can't find anything on Google. Any ideas?
As now my panel is on the right side, but the window swticher shows text rotated by 90 degrees.
Thanks in advance!

Change the Panel Mode to "Deskbar". Setting is located at Panel Preferences >> Display tab.

How to change url of bsp page

Hi experts
I have created a BSP application , In login pafe i want to change URL which we use for TEST .
Or can can i redirect to another url , when TEST the page.
Thanks & Regards
Prashant Gupta

Hi Prashant,
Re-directing to another URL on load of page is a very simple piece of HTML code.Put this on the layout of page from where you want to re-direct to the other URL.
<html>
<head>
<metas http-equiv="refresh" content="0;url=http://sdn.sap.com">
</head>
</html>
Here the important line is the 3rd line which begins with "<metas". The operation is "refresh" which means to "refresh" the current page with the information that follows. The content begins with a zero, which is the number of seconds to wait, and then the URL that you should be taken to.
So the above code would re-direct you to the http://sdn.sap.com page as soon as you log in.
Hope this helps!
PS : meta changed to metas to allow adding of the code.
Regards,
Saurabh

Boolean button changes color briefly when pressed

Hi, I am using Boolean button as a toggle, so I only want text changes when it is pressed with no changes to button appearance.
I am able to change the color for On in properties to match the Off color (I am using the Silver palette so normally On is yellow), however when the boolean button is changes to On, there's a brief changes of color still. Is there any way I can get rid of it?
In fact some of my buttons blink black while others blink yellow. I have no idea where that is set.
Thak you very much.
Solved!
Go to Solution.

There are 4 colors for booleans ON and OFF plus going from ON to OFF and going from OFF to ON
You only see the transition color when you have the Mech latching set to "latch when released"
Set it to "Latch when pressed" and you will not see the transition colors
You can set all 4 colors by using the Colors [4] Property
Colors [4] Property
Short Name: Colors[4]
Requires: Base Development System
Class: Boolean Properties
To Use: Create a property.
Array of up to 4 (Foreground Color, Background Color) pairs, where Foreground Color is the foreground color of the Boolean control and Background Color is the background color of the Boolean control. Color pairs include False, True, True to False, and False to True.
You can set the color of the front panel object by wiring a hexadecimal number with the form RRGGBB or by wiring the color box constant to the property.
This property is similar to the Colors option on the Appearance page of the Boolean Properties dialog box.
If the Boolean control has four (Foreground Color, Background Color) pairs for the four states, this property always returns an array of four (Foreground Color, Background Color) pairs when reading. When writing, you can pass in an array of length 1, 2 or 4. If you pass in only one element, this property uses that element value for all four states. If you pass in two elements, this property uses the first element value for the False and True to False states. Similarly, this property uses the second element for the True and False to True states.
If the Boolean control has only one (Foreground Color, Background Color) pair for all four states, this property returns an array of one (Foreground Color, Background Color) pair when reading, and uses the first array element when writing. You cannot change a Boolean control with one (Foreground Color, Background Color) pair to a Boolean control with multiple (Foreground Color, Background Color) pairs.
This property only uses the True to False and False to True states when you set the Boolean control to latch or switch when released. You can get and set these (Foreground Color, Background Color) pairs even if you do not have the control set to latch or switch when released; they just are not used.
Because this property does not change the data of the Boolean control, you can set it at any time.
You can use the this property for Boolean controls on the Classic, Express, Modern, and Silver palettes. You cannot use this property for Boolean controls on the System palette.
Omar

E-mail button changes email address when submitting

Hello,
For some reason when I try to e-mail my form when I hit the submit by e-mail button in the Send Form that pops up the e-mail address that the form is supposed to be sent to is different than what I have set it up to be on the form. I have tried creating the e-mail submit button using the e-mail button from the standard library and by using a regular button and changing it to a submit button, but it does not make a difference.
Can anyone tell me how to get it to not change the e-mail address when I try to submit my form? The e-mail address I have entered it to be sent to is: [email protected] but when I go to submit when testing my form it adds an "a" onto the end of association so the e-mail address is changed to: [email protected]
this means that when I submit it the form does not go to my inbox because the email address is wrong, even though the e-mail address is entered correctly in the Object palette in LiveCycle Designer.
Thanks
Tamara

Hi Tamara,
It seams to be a glitch with your version of LiveCycle Designer. It should work if you manually change the auto-generated script instead of using Designer's dialog. Here's how you can do that:
1) Select your email submit button and open the Script Editor (Ctrl+Shift+F5)
2) Make sure you select the 'click' event or 'Events with Scripts' filter at the top left of the script editor window next to 'Show:'
3) Near the end of the script (line 57 and 59) you will see 'mailto:' followed by the faulty email address you were seeing.
4) Change it to what you need it to be (both lines)
I have an earlier version of Designer, so I can't test it myself, so let me know how it works for you.
You can also find it edited here. I also made your tables flow for you.
Kyle

Menu Buttons Change Image instead of Highlighting?

Does anyone know how to/or if it's possible to make a DVD menu in Photoshop for Encore where, when the menu button is highlighted it actually changes image instead of making it a solid highlighted colour?
For example...
In a DVD i'm making, I have Cartoon images that are the menu buttons. I would like to make it so that when you select it on your dvd player it makes the eyes open up wider and mouths of the characters open up. I have made the duplicate layers and changed one to have the open eyes and mouth and placed it directly ontop of the other and put both layers in the one group with the (+) to allow Encore to recognize it. But all I get is the top layer of the two turning to a top colour. I know that using prefixes like (=1) makes it highlighted and that is why it's highlighting but I don't know what else to suggest. I've looked at the prefixes on the Encore help on this site and tried to work it out but no luck
I know this is due to my lack of knowledge and really need some help to fix it, or know if it's even possible (I assume tht using such great products as Adobe it will be)
Thanx

Welcome to the forum.
This is easily done by doing dupe Menus for each Button. The Button on the original Menu will be set to Auto-Activate, and be linked to the dupe Menu with the different graphic. I would probably turn OFF Sub-picture Highlights.
The trick is to do a layout, and also name your Menus (especially the dupes), to reflect exactly what they do. I use Illustrator for my layout, but pencil and paper work well too.
Note: if run on a computer, the user will need to Dbl-click the Button, as Auto-Activate only works seamlessly from a DVD set-top player.
There are several other posts on this forum (a few very recent), where I go into much more detail. Also, Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, by Focal Press, has excellent, easy to follow steps for doing this. Though written for EncoreDVD 2.0, 100% of the book will apply to CS3 & CS4.
Good luck,
Hunt

Button "change" disappers in BSP degree audit

Similar Messages

Maybe you are looking for