Button configure as Update but doesn't update the document
Hi,
I have a form for a document library. I also created an Approval workflow for it. Once the requester completed and created a form, the WF then starts by emailing the approver to approve/reject the request. I have 2 optional button for Deny
or Approve. Each have rules that sets the Request-Status field to show approved or deny. There is a button that I configure as "Action: Update Form".
Well, I select the Approve/Reject button, then select the Update button, close the form and no data was updated. I added back the Form's Save button in the top ribbon, using that Save button then saves the data. The Update button on the ribbon
also doesn't save the data.
What is wrong with my Update button and how to fix this?
Thank you.
Could you just map the buttons functionality to the Save action instead? Same result if it works.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint
Similar Messages
-
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
I removed from my computer macbook, mac app store, and now I want to reinstall with "software update" but doesn´t appareance
Hola, buen dia, Ignacio. Saludos desde México.
To get the Mac App Store back you will need to manually download and install the Mac OS X 10.6.7 Update Combo;
http://support.apple.com/kb/DL1361
It is safe to install this over your current installation of 10.6.7. It will reinstall the Mac App Store, as well as fill in any gaps that your installation my have. It is a common troubleshooting step.
Ciao -
I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8. It restarts but doesn't update after disk installs. Do I need 10.6.0 to install first?
Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.
-
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I have deactivated my mobile me, switched to iCloud. I have no albums to update but I still get the pop-up sign to move files, it locked up Aperture. I had to restore my Aperture files, I've restarted and it still wants me to move files. Anyone have any suggestions?
Quit - or force quit - Aperture, if it is still trying to transfer MObile Me content.
Then relaunch. When the "Mobile Me has ended" panel appears press the "Learn More" button, not the "o.k." button.
Then you should be able to open the Preferences in Aperture and and open the "Web" panel. Remove "Mobile Me" from the Accounts pane.
Then also open the System preferences > Mobile Me panel and check if you are still signed into Mobile Me.
If this does not work, try to disconnect from the Internet before you launch Aperture again.
Regards
Léonie -
I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too. How do I get it to put the songs on my iPhone?
Have you selected the music to sync?
-
I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...
iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2 -
I have an old app in my updates but no longer have the app on iTunes and iPhone 4s. How can i remove it? It is beyond annoying, as it constantly has the badge noticfication but can't update the app as it is no longer avaliable. Help!!!
Unfortunately the app isn't avaliable in the Australian store only avaliable to download in the UK store, very confussing as it is definitely not in my iTunes or on my iPhone. I don't understand how or why it managed to get to updates. I just want to delete it or at least get rid of the notification badge for it.
-
My daughter's ipod nano shows up in "devices" when I plug it in...but it disappears. Right away it says it needs to update, but then after extracting the files it comes back and says that it can't be updated because it can't be unmounted. help?!
When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
hi i'm trying to install updates but Name and then the password I have for the account won't let me in. Is my name my email address?
Updates do not normally require any kind of password access. It is more likely your machine's security is asking for you to allow things to be updated.
-
I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine. Now i keep getting reminders to update the app and I cant get rid of it from the app store. Help.
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test. -
Requires to update plug-in JAVA. I update, but всеравно shows update a plug-in
Requires to update plug-in JAVA. I update, but всеравно shows update a plug-in
Duplicate of this question:
https://support.mozilla.org/en-US/questions/950060
It's an advertisement designed to trick users into installing undesirable software. -
I checked for software updates, but no pending updates were found, I'm running OS X vr 10.5.8.
None of the above answers have helped me.
-
Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.
Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy
Maybe you are looking for
-
How to adjust a "control array" size
I have a program that creates a digital PWM signal with variable duty cycle. The duty cycle changes every 50 ms, but the overall wave frequency stays at a frequency determined by the user. I have the VI attatched. My problem is this...I need to be ab
-
Desktop pictures look funny after leopard
I use pictures from a vacation and on my second monitor the picture looks weird, but most of the built in pictures look fine. the picture im trying to use is of a tree in the middle of Wyoming so theres only sand around and rocks. the sky should be b
-
Can the Review Widget be reformatted?
I am having a hard time making a review widget fit on my page. I can seem to reduce the white space around my three possible answers? Also, would rather have all three on one line to run across the bottom of the page, rather than stacked. Anyone know
-
Making a file the smallest possible
I have a 48 minute podcast. How can I make that file the smallest possible for transferring the data? It has voice and music.
-
Company for Lotus Notes Integration
Hello, I'm searching for solutions to integrate Lotus Notes into Enterprise Portal. I found much information about the You@Web Repository Manager for Lotus Notes, supplied by Conet. This is the only company, I found. Does anyone know another company