Button hierarchy on layers in interactive PDFs

Hi,
we recognized a flaw in the display of interactive buttons within interactive PDFs:
We created a document with several buttons, that are mentioned to display other hidden buttons, when clicked. The problem is that even when the layer of the button, that are invisible when loading the page and are visible when clicking on the other button, is above the layer of the button to click on, the other button is displayed in front of the button that should appear in front of it. Most buttons appear on top of all layers when clicked once. Is there a way to avoid this?
Thanks a lot for any suggestions.
Regards,
Philipp

The way the PDF specification was written, interactive elements always appear above all other content. It has nothing to do with what you're doing in InDesign. You'll just have to work around that fact in your design.

Similar Messages

  • Buttons not working - InDesign (CS4) Interactive Pdf

    I've been creating an interactive pdf document for a client over the last few months.
    Initially, this was going to be a 70 page document, with limited interactivity (some forwards and back buttons etc.).
    Now, this has grown and is a 220 page document, with rollover buttons that reveal other buttons layered on top of each other, various menus to navigate back and forth through the document, masses of content, images, bookmarks etc! And, I'm experiencing problems with buttons/ links now working when the pdf is exported.
    Some of the buttons that don't work on exporting pdf, in the inDesign file appear to be set up in the correct way, I have even rebuilt some of them still with no luck on exporting them.
    Is the document now too big and too complex to work??
    If anyone at Adobe could give me some of their expert advice that would be much appreciated as myself and colleagues are now out of ideas!
    Many thanks!

    I've been having experiencing a similar problem after I chose to create a digital presentation with InDesign instead of PowerPoint.
    It's basically a showcase of products with several non-linear navigation buttons (for which I use buttons, bookmarks and the "Go to Destination" option).
    There are several videos, so I thought that the interactive PDF container would be the best choice for a single file, since this presentation is to be distributed to many sales representatives.
    Everything was fine until there were about 100 "pages" (slides). After this point, the "Go to Destination" buttons stopped working (although the mouse cursor indeed changes to a pointing hand). Only the "Go to next page" buttons do work, and I have already tried to export the PDF in several ways. I've been really thrilled by what kinds of restrictions does an interactive PDF have.
    Have you found any solutions to this matter? I think I have pushed this functionality over its limits...

  • Using buttons to change language in interactive pdf

    Hi all,
    I am creating a interactive pdf document which needs to be in 4 languages, I have created 4 buttons on the front page so the user can click to swap to French, German etc etc, but I want to be able to have all the relevant languages within the same document rather than importing each file in separately so it can be emailed as 1 file. How can I script this to happen and how do I build the document to contain all the language pages. I don’t have any Java script experience or can this be achieved with the standard Acrobat 8 pro toolset? Any help would be much appreciated.
    Many thanks in advance
    Sh6

    Thankyou for your reply.
    How would you set these up to work, say you have 14 pages in UK language and on some pages there are already buttons that when pressed show/hide a layer containing facts boxes. As on the front page you would want to then hide all 14 pages of the UK so they are no longer accessible, would you have an action that as you open the French which would be layer 2 an action fires to hide layer 1 which would be the UK.
    I was playing around with combine pdfs so you end up with a package so you would have 14 pages x4 in each the package, then you would have a button that links to the front page of each language do packages read in Acrobat reader fine though?
    Many thanks for your help.
    cheers
    Sh6

  • Zoom buttons in flash for a interactive PDF file

    hi i have created a interactive PDF in indesign CS5 and i'm exporting it as a SWF but my issue is that indesign dose not allow you to create a zoom in and out function: please see example in link http://www.mentalhealthcommission.ca/annualreport/
    it is the toolbar at the bottom i'm intersted in. dose any one have a example or tutorial that on how i can include this in my interactive file.

    Hi.
    I'm not sure about what to you mean. But I create first the crossword with Excel, I mean to put the words in the right order and the questions and/or cue too. Then I create a table in InDesign and format some cells with black background and some borders. I upload both captures, from Excel and from InDesigne. Then with Adobe X Pro I create a form, so I can create singles inputs for the crossword.
    I hope i understand your question.
    Regards from Lima, Perú

  • Issues with buttons in interactive pdf (CS4)

    Hi there, I'm working on an interactive pdf that is going to be used cross platform. I'm working with ID CS4 (6.0.6) and Acrobat CS4 (9.4.4). I have some issues with the buttons I've created that I need to solve. The buttons are contours made in AI and pasted in ID. When done I exported my pdf from ID and checked with Acrobat and added a few links using Acrobat as one can't use the command 'go to specific page' in ID itself (yes, this has to be a non-Flash pdf).
    When testing in Acrobat I noticed 2 things I need to solve.
    First: sometimes a button doesn't work properly the first time but later on it does or the other way around.
    Second: when viewing on a pc using Acrobat Reader 9.4 some of the buttons show little dots in a square showing the active field when hovering, although I've set border colour and fill colour to none on all buttons.
    How can I fix these issues? I couldn't find anything in the properties dialog box. And one final question: from which versions of Adobe Reader (Mac and pc) are interactive pdf's supported?
    TIA

    Thanks George. You're correct, most of the actions were set straight in ID. The only reason I go into Acrobat is to hookup the buttons that need to go to a specific page rather than to the next page. Since my version of Acrobat is not English I had to google English manuals to get the exact English phrases. Alas, I can't hand you a copy of the document either since it holds some sensitive information that I'm not allowed to share.
    Instead of posting all the settings I made, I looked more carfeful to the buttons that have multiple actions. In Acrobat you have a bit more control over the hierarchy of the actions so I guess this is where we can straighten out the hickups, right? I have a few buttons that have actions for go to a next/previous page and toggle the show/hide of a few items on the pages. So I my case most of the buttons were set to first do the show/hide and then go to the next page rather than first go to the previous/next page and then do the show/hide actions. Could this be the cause of the staggering of some of the buttons?
    And for last, right now the ID document has 4 layers. I could reduce that to 2. Would that be of any (additional) help? Thanks!

  • Buttons don't work: InDesign CS& interactive PDF

    Hi, i'm creating an interactive PDF book in InDesign CS6, it's a simple plain text + images book
    I added some buttons on the first page that work as a table of contents (each button redirects you to a diferent page).
    And one at the bottom of the master page I'm using (so you can see it on every page of the document) that sends you back to that table of contents.
    They are simple objects converted to buttons, with the option "go to destination" active and with a certain Hyperlink Destination asigned each.
    The first time I exported the document they all worked perfectly, but then after I made some minor changes to the document and exported it again, they didn't work. The curious thing is that I have 2 more buttons at both sides of the page that have the "Go to next/previous page" that ARE working. So my guess is that it has something to do with the Destination option or the destinations themselves.
    Here I explain how I did it:
    1. Went to the page I wanted the destination.
    2. Click on the Hyperlinks menu then "New Hyperlink Destination"
    3. Added its name and clicked OK.
    - Did the same with every page I wanted in my index -
    4. Went to the page designed to the table of contents.
    5. Created a text box with the Type Tool.
    6. Converted it to a button in the Buttons and Forms panel.
    7. Added a "Go to Destination" action to it.
    8. Selected its respective Hyperlink Destination i made before.
    - Did the same with every other button of the table of contents and that one at the bottom of the page that takes you to it -
    9. Exported the document as an (Interactive) PDF.
    And that's it. The 2 buttons that have the "Go to Next/Previous page" action work, but the ones that have the "Go to Destination" action don't. There are no layers, there are no other objects stacking over them nor behind, just the buttons against the background.
    I tried with Bookmarks instead of Hyperlink Destinations, but didn't work.
    I tried making them Hyperlinks directly with the Right Click menu then, Interactive option, then "New Hyperlink" and selecting the page I wanted them to go, but hey didn't work either.
    And to make a classic table of contents from the Layout menu, wouldn't make much difference because I still have that one button that takes you to that page where I have my table of contents, and it will be still not working.
    Can anyone help me? Has anyone had the same problem?
    Thank you!

    Exactly the same thing I am experiencing. Can someone please help?

  • Interactive PDF–buttons working in preview but not in PDF

    I have a series of buttons that reveal hidden graphics. One of those hidden graphics is a background layer, in a separate layer, that should appear when a button is clicked. It is showing up, but in front of all other content, even though the layer is in the background. I have nothing else on the background layer. Also, the preview in InDesign shows this working properly, it's the exported Interactive PDF that is having problems. Any suggstions?

    Show/hide buttons can let you show and hide graphics which have been themselves turned into buttons. But in InDesign, they cannot control the visibility of layers. I think that's because of the way buttons are handled in the PDF file. I think the buttons themselves are seen as a separate layer above the "content" of the PDF.
    You can change layer visiblity with buttons but not in InDesign. You have to do it in Acrobat.
    Create your layers in InDesign. Export as a PDF but in the Export Adobe PDF dialog box, you must select Acrobat 6 compatibility and check Create Acrobat Layers. This takes InDesign layers and makes them PDF layers which you can work with in Acrobat.
    You can either create the buttons in InDesign or in Acrobat, but controlling layer visibility isn't an available action in InDesign. So you'll need to change their action WITHIN ACROBAT.
    In Acrobat, you can choose View > Navigation Panels > Layers. You can turn the eyes on and off to control visibility like in InDesign. Then set the layer visibility the way you want the first button to set and set the action for the first button to be Set Layer Visibility. When you click Add. It sets the visibility to the current state. Repeat the process for the second button.
    In InDesign CS5, to export buttons you'll need to choose File > Export > Adobe PDF (Interactive). Check Acrobat Layers.

  • Does Safari support a interactive PDF with hidden layers? I'm on version  5.0.3 and the interactive PDF displays just fine, but our web development team tells me all the layers display when they view the same PDF on Safari.

    Does Safari support interactive PDFs with layers? Through the use of hidden layers and buttons we built in interactivity that allows the viewers to click on buttons to display different content. When I view the PDF in Safari 5.0.3 on my Mac OS 10.5.8 the PDF displays fine and the interactivity works. However our web design firm tell me the PDF displays all the hidden layers when they view it in Safari. Who's right?

    Try updating your Safari to the latest version, 5.0.5.
    Also check whether the rest of your system is up to date by going to Software Update in the Apple menu.

  • Interactive pdf using Indesign CS5.5 problem with layering

    Hi all
    I have designed an interactive pdf - not for the web. I have a problem layering out a page. On the page there are 6 buttons. Each button when pressed will bring forward a box containing content/information. When I designed the page using indesign cs5.5 I made sure the largest box of information was at the top of the layer. I thought this would be the cleanest way to present the page. By having the largest content box (each of the six content boxes are different sizes) at the top it would cover the other boxes. When I exported the file out the smallest box was at the top, then the secondest etc. It looks pretty messy.
    Is there a way to ensure that the lagest content box is at the top when it exported to pdf????
    Regards

    Have patience!
    Have you tried putting that largest box on it's own layer at the top?  I don't know much about buttons etc though, if you wait someone will come on here that does.  A lot of contributors are in different time zones though.....

  • Interactive PDF button functions go beserk after export

    Mac OS 10. 6.8. - InDesign 7.5.3
    I have 21 page InDesign doc that is designed as an interactive PDF. The left hand nav is a simple page navigation via bookmarks that allows the user to navigate to any page of the document. Most pages are just copy but on two pages I also have a cascading list of items that the user can click on and reveal the additional information about the topic (see http://i47.tinypic.com/whmupv.jpg ). One of these cascading lists has 11 topics. These topics are stacked on 11 layers to allow the user to seamlessly navigate all the topics and additional information seamlessly on one page. The topics are all buttons that show/hide the relevant layer of information.
    However, when I export the PDF, the last 3 topics (or bottom three layers of topics) simply do not work. When you click on any button in the top eight layers, they perform as programmed. But the bottom three on any layer are hopelessly broken, turning on/off the wrong layers and buttons. I've redone all the button interactions twice now, once from the top of the series of layers down and once from the bottom of the series of layers to the top. I can't make the bottom three layers work right. I even tried changing the layer order, but those bottom three layers continue to break.
    I also tried downloading the Indd 6.0.1 trial and exporting from that but I get the same broken buttons. Is there a possible fix in Acrobat that I could try? We've done interactive PDFs like this before with up to 8 topics in a list and that one worked fine, although we discovered other bugs with layers of buttons like this.
    Thank you.

    If you look at where the red circles are you can see the very slight increase in object scale.  The 2nd image is a comparison of a spread without any use of buttons.

  • Interactive PDF Buttons Navigation Not Working As Expected

    Hi all
    I am a newby so this may be a very quick fix.
    I am contructing an interactive PDF in InDesign CS5.5 v7.5.  Essentially basic next page and previous page buttons are jumping ahead and back 2 pages at a time when the exported PDF is viewed in Acrobat v9.4.4 and or Acrobat Pro X v10.  The PDF does however only jump 1 page at a time forwards and backwards when viewed in Preview v4.2.  I am running this on an Intel Xeon Mac using OSX 10.5.8.
    Also I have rollover colour and clicked colour applied to these buttons.  These colours show up as expected in both versions of Acrobat but only the clicked colour works in Preview.
    You assistance with any advice on this asap would be GREATLY appreciated.  Thanks for your time :-)

    Then maybe you can help me.
    I'm trying to make some simple text buttons that are gray when not selected, and white when selected. I've attached a picture of what this looks like when I try to do this with a DVD Studio Pro button in a "normal" (non-layered) menu (note: I did not pick this heinous color scheme).
    http://i.imgur.com/cKybB.jpg
    The gray bleeds through for some reason, and I can't seem to fix this with the grayscale overlay color menu.
    Any hints?

  • InDesign CS5 or 5.5 interactive pdfs  - can I create a button for printing?

    Hello lovely InDesign experts.
    I am creating an interactive pdf using CS 5.5 and would like to have a button on each page that, when pushed, opens a print window (so the user can print the page, or range of pages, if they want). I know you can do this to the finished pdf in Acrobat but would prefer to keep everything in InDesign if possible.
    Thanking you very much in advance,
    Lisa

    And if you're getting into doing stuff in Acrobat these two links are worth reading, the first here written by Bob himself, the second here a cool new way that has been developed, if you requested they add a print button to the list of what you can do and it's possible they probebly would.

  • Interactive PDF: Rollover button state no longer working properly  ???

    Okay, what's going on with the Interactive PDFs lately?
    Now all my rollover buttons no longer work properly.  If I have a button that's simply a black arrow, and in the rollover state it's red.
    No matter if I'm checking it out in the latest Acrobat Reader or Pro X, the rollover only works for a brief second..then reverts back to black - the original state.
    This, combined with my latest problem with the show/hide button state, is really becoming a frustrating hassle:
    http://forums.adobe.com/message/3933451#3933451
    Any help would be appreciated.
    I'm running 7.5.1.
    Is this an Acrobat issue?  The button function here seems to work in the InDesign preview mode.

    Hhmmm...I'm actually having this problem even with Adobe Acrobat 9 Professional. Does this make sense?
    Again, I'm creating the document in InDesign CS5 and then building the PDF with  Adobe Acrobat 9 Professional, and the rollover effects don't work in Adobe Acrobat 9, Adobe Reader 9, and Adobe Reader 10.
    I'm a bit new to this process of software not providing its basic touted functionality. Is this the kind of thing where support for this functionality will vary from product to product? I had the same issue with PDF Portfolio -- where all its functioanlity was not supported in Adobe Reader X. If so, perhaps I should simply stick with the classic features of PDFs. Or can I trust, reliability, that going forward, this rollover effect will be supported in all Adobe Reader versions? This is quite an important issue for me as I provide all the documentation for my employer, including customer facing documentation -- and I simply don't know. Any recommendations?

  • How do I create a print button for use in Interactive PDF?

    I have a document created in InDesign CS4 which I will be converting into an interactive PDF (which has various links added on a master page so they appear on every page), one of which I would like to be a "Print" button.
    I know how to do this in Acrobat Pro, but I don't want to have to create a button in Acrobat and then copy/paste it onto all pages in my document. Surely there must be a way to create a button of this type in InDesign CS4. Any help would be greatly appreciated.

    Sorry, no. Print button functionality must be added in Acrobat.

  • Email button created in InDesign won't work on Interactive PDF. Anyone know a fix?

    Hello there, I am trying to make a e-mail button work after its .swf file is imported into a new iD document and exported as a interactive PDF. I have tried various things and work around but I can not seem to be able top make it wrong. I ask iD twiter for help and after a conversation with them I was told to try here.
    OS: Windows 7, iD Version 9.2.1 x64
    This is my process (Will include images and document files)
    1. Create simple solid color box object. Add a text title to the box and otline the text.
    2. Group the objects and make it into a button. Add a roll over appearance.
    3. Add "go to URL" action. One sample button URL is: mailto:test@email(dot)com, Second sample URL is: mailto://test@email(dot)com (the forum editor kept making links to this fake emails)
    4. Export iD document to .swf (Settings where default)
        NOTE* Here the .swf open in chrome and the email buttons work fine as a .swf alone
    5. Import the SWF into a new iD file. Export this second iD file to an Interactive PDF (Seetings where default)
    After doing this I click on the email buttons inside the interactive PDF but they dont start my email app (Outlook 2013) However every time I click either button a new empty Google Chrome window opens.
    Here is a dropbox link to the files themselves, the type is outlines so no need to worry for missing fonts. https://www.dropbox.com/sh/fp76buzt98td8fy/4DD6tqImd9
    I hope someone can help me getting this fixed. Http:// Link buttons work fine on interactive PDF's following this process. For soem reason the email ones are the only ones that wont work. I have to use this process because I am working with an interactive PDF that has an animated roll over menue that does not work with ePub so the only way for my project to work the way I want it too is by exporting .swf of the finished file, importing on a new iD file and re-exporting to a interactive PDF.
    It was really hard finding anyhting related to this issue im having. Here is the only similar  issue I could find and it is from 2008! http://forums.adobe.com/thread/324167 I do hope I am the one doing something wrong here and not that Adobe has not fixed this .swf email links issue.
    Thanks for the help!
    -Sebastian

    Alright thanks! Ok this is what happens in my end:
    - The interactive PDF you sent me works fine. The iD file opens fine as well and is exactly the same process so that checks.
    -I exported your iD file to .swf, created a new iD document and imported the exported .swf file from the file you created. I exported this new document to interactive PDF. I open it and again I click the links and only google chrome windows open
    This is the link it probably works fine on your end
    https://www.dropbox.com/s/on5tun0v0eunjhu/buttons%20email%20text%20swf%20imported%20to%20i nteractive%20pdf.pdf
    I think there is something going on in my end. "Google Chrome" or "Flash" might be intersecting email links or something becuase I cannot get these .swf + interactive pdf combo to open the email client not even after I used your iD file, exported .swf, imported it and export again to interactive pdf.
    Again the interactive pdf you sent works fine and when I export my file to interactive pdf it works on my end as well, its only after i export to swf and then I use the file inside iD and export to interactive pdf that it does causes me trouble. I will see what I can do to fix this. At least it was working for you so if its only in my end then its not that bad but it will bugg me forever haha!
    Thanks again for your help!! Sorry to take your time Salah!
    -Sebastian

Maybe you are looking for