Button im Volleditor in PSE 8

Hallo liebes Forum,
ich habe jetzt Photoshop Elements 8 gekauft. Unter PSE 7 habe ich die Button für z. B. neue Ebene oben in der Ebenenmaske, jetzt, unter PSE 8, sitzen die Button untern und ich finde keine Möglichkeit die Button nach oben zu versetzen. Hat jemand eine Lösung, wie ich die Symbolleiste direkt unter der Ebenenüberschrift einbinden kann?
Vielen Dank im Voraus für Eure Hilfe

Ich wuerde mal davon ausgehen, dass das nicht geht. Die Buttons waren in zumindest einer frueheren Version (PSE2) auch unten, und sind in Photoshop (CS4) unten. Ich habe PSE8 nicht, aber normalerweise kann man solche Einstellungen nicht aendern.
Juergen

Similar Messages

Using Bridge to Camera Raw to Open Image button also drop shadow problems

I remember when I was working with RAW in PSE 8. I would be in Bridge looking at a pic and double click on it. PSE 8 would open in Camera RAW and I could play with the pic a bit, make some adjustments, then click on OPEN IMAGE. When I did that it would open in PSE and it would be in jpg format. With this PSE 9 and the updated Camera RAW 6.3, when I punch OPEN IMAGE I still have a picture labeled .CR2 which I think still means RAW. When I double click in Bridge the .CR2 pic shows as 8 bit depth. I can do a little more work on it and use SAVE AS. When I do that, the sample file name that shows is still in .CR2 format and I must change that to .jpg and then below change from PHOTOSHOP to JPEG to save my file as a jpg file. Is there something that I have to change in preferences to get it to open the image in jpg format when I hit the OPEN IMAGE button? Or, is this an "improvement" with RAW 6.3? Also, I seem to be having trouble adding a drop shadow (or any other effects) on jpeg pics. At least it doesn't show up on the screen after I apply it. I just recently updated to Camera RAW 6.3 and updated my Operating system on my iMac computer to OS 10.6.6. I emailed this request to my good friend with an identical setup on his iMac and he is having the same response when performing the above operations. Any ideas what the problem might be?

Okay, previously you seem to have been using the bridge version of camera raw to edit your raw photos. That has many more options than the PSE version of the raw converter. (If you still have PSE 8, you can see the difference by using File>Open in the editor to open a raw photo for the PSE version of ACR, which works the same way in PSE 9.) In PSE's raw converter, you use the Open button, then save your photo in an image format in the editor. The Save button in ACR in PSE is only the DNG converter.
Layer styles should work exactly the same way as in PSE 8. However, in any version of PSE a drop shadow, like a real shadow, needs someplace to fall, so unless there is empty space on the layer, it won't appear. Try creating text or drawing and simplifying a shape and adding a drop shadow. Does it appear then?
Also remember that Jpegs won't let you save either layers or transparency when you resave the file.

PSE 9 Error Message

Upon start up an error message that says: Unable to locate component. Application failed to start because file MSVCP110.dll was not found. Re-installing the the application may fix this problem.
The message box will not close until I click the OK button exactly 15 times, PSE 9 then opens. Once open I can no longer access any of my NIK software plug-ins. I re-installed the application and
I still get the same message and results. I am running the app on a PC with Windows Vista Home Premium. I have used the app for quite some time and have not installed or uninstalled any other apps
in months. Any help would e greatly appreciated.

See this thread for solutions (PSE is based on PS), including a download link:
http://forums.adobe.com/message/5802740

When doing the tutorial in photoshop touch to merge pictures where is select button???

when doing tutorial in photoshop touch merging 2 pics they say select remove button where is it pse??

rosemary mocke wrote:
Hi helper?
Have managed to do some editing now how can I do anything with pics can't see any place where I can forward,save to something etc. on the basic photoshop I can email the finished picture. Can you help here?
Sent from my iPad
In the image I previously posted, in the upper left corner, you'll see an arrow pointing to the left. Tap that to get to your projects (as well as save any PS Touch projects you might have presently open in the editor). Here, you can manage, move, and export your projects to various formats and email, save to your device or post to Facebook or Creative Cloud.
They are, in order, from left to right: Creative Cloud, export options such as Save to Camera Roll (save to your device), Create new folder, Duplicate project, Delete project and images on Facebook.
For example, tap the export option (second button from the left), then tap "Share by e-mail," choose your desired file format (JPEG, PNG or PSD) and choose the image(s) you'd like to send. Tap OK and your email app should launch, attaching the images, ready for you to send in your email.
Note each option has different file formats supported. Sharing by e-mail, as noted before, lets you export as JPEG, PNG or PSD. Saving locally to your tablet only lets you save as JPEG or PNG. Uploading to Creative Cloud lets you export as JPEG, PNG, PSD and PSDX (which is readable via Photoshop CS's plug-in as a free download).

How do you show PSE as a normal windowed application?

Hi,
Every application I have installed displays in the same way, ie they all match each other, are the same colour, all have minimise/maximise/close buttons that match etc., PSE on the other hand, looks completely different.. its black, well grey but its not how everything else looks.
Is there a setting somewhere that turns off this theme/style/chrome '?
Shaun.

99jon said: "...earlier versions had the ability to change the appearance of the UI..."
Is this possible in PSE6 (mac version) and if so, can you tell where the settings are?
Thanks
Shaun.

ERROR: - Cannot export - JAVA is not the current PSE provider!

Hello Colleagues,
in our SAP PI 7.31 Dual-Stack system we facing following error "ERROR: -> Cannot export - JAVA is not the current PSE provider!" under Netweaver Administrator (NWA) -- > Certificates and Keys: Key Storage, if we executing button "Export View to PSE" for view "ICM_SSL_*".
As by default for ABAP and Dual-Stack systems, profile parameter "ssl/pse_provider" is set to ABAP.
How we are able to solve that issue?
Many thanks in advance!
Regards,
Jochen

Hello Mr. Schertel,
I'm facing the same error in our system.
Did you already solve the problem?
Best Regards,
Alexander Beck

How to open more than 1 file at a time in PSE12?

How do you set PSE12 to open more than 1 file (jpg) at a time? I've seen this question come up many times but no one seems to get the problem resolved. I've tried all the suggestions. Any assistance appreciated.
I had this program installed and working as I wanted about 3 months ago. I then uninstalled and reinstalled a few days ago. Now it won't open more than 1 file at a time.

Hi,
My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
Open Windows or Folder Explorer
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
Look for PhotoshopElementsEditor.exe
Right click on the file and select Copy
Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED - you should get a prompt asking if you want to continue - you do
Close the Explorer
In the Windows Control Panel, select Default Programs
In Default Programs, Select Associate a file type … - it will take a while to display the list
Scroll down to the type you want to select - say .jpg and select it
Click on the Change program button
Click on the Browse button
Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
Click on OK and close the Default Programs
Now try your tests. I can get multiple files to open as well as retain Expert mode.
Good luck
Brian

Problem with text written on a image

Hi , I'm new to PSE9.
I have a plain image and I want to write some text on it.
ok but when I do this the text is does not look right. Its not sharp enough.
The definition of the lettersis not brilliant . Also how do you put bullet points on the image
sorry this sounds a bit basic
Thank you for your assistance

For your first question what font face and size are you using?
To answer your second question, refer to my msg#2 at http://forums.adobe.com/thread/607934 where I discuss how to insert special characters using the Windows Character Map.
Here I did a search on "bullet" and selected the round bullet and clicked the Copy button.
Then in PSE I activated the Text tool, clicked to start the text, did a Paste (Edit > Paste, or Ctrl-V) to insert the bullet, typed "line 1" followed by carriage return, then another Paste followed by "line 2".

How to open a book.indb file at full size?

I have a desktop shortcut that opens a book.indb file, which holds info for about 20+ chapters. But when the Book palette opens, it always shows just the first 8 chapters. I have to drag the bottom of the palette down to see the entire contents. It's not exactly a major issue, but is there a way to get the Book pallette to display its entire contents when it opens?
Also, I've set up my WinXP PC so that all palettes open on the secondary monitor. When I re-open InDesign, it remembers the positions of each palette on the secondary monitor, with the exception of the Book palette. This one always opens on the primary monitor and I need to drag it over to the secondary monitor to get it out of the way. Again, no big deal but it would be nice if InDesign could remember where to place this palette.
Any suggestions about the above?
Thanks, John

Hi,
My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
Open Windows or Folder Explorer
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
Look for PhotoshopElementsEditor.exe
Right click on the file and select Copy
Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED - you should get a prompt asking if you want to continue - you do
Close the Explorer
In the Windows Control Panel, select Default Programs
In Default Programs, Select Associate a file type … - it will take a while to display the list
Scroll down to the type you want to select - say .jpg and select it
Click on the Change program button
Click on the Browse button
Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
Click on OK and close the Default Programs
Now try your tests. I can get multiple files to open as well as retain Expert mode.
Good luck
Brian

Cannot save as TIFF from ACR

This is my first post on this forum. Please forgive me if I have completly misunderstood something.
I am using PSE7 with ACR 5.6 on Windows 7 (soon to be updated to PSE 11). I have only been using RAW files for a short while so I am far from familiar with ACR but I am fairly sure that when I first installed it the "Save Image" dialog box offered me several file formats, in a drop down box, to save the image as. I remember tif, jpg, psd and dng at least. Now I am only offered dng (in both all uppercase and all lowercase). Am I remembering wrongly or have I changed something somewhere that is doing this? I can find no way to save the image other than as a dng. If it matters ACR is set to 8bits/channel and I am trying to convert NEF files opened by right clicking in the Organiser and selecting full edit where upon ACR opens.
I have tried re-downloading and replacing the Camera Raw.8bi file to no effect. I suspect it is me doing something wrong rather than anything being "broken".
Many thanks in anticipation.
Peter
Just realised that this is probably better in the Camera Raw forum wich I have just found so I'll re-post it there. Sorry.

The Save button in ACR for PSE is just the DNG converter. To actually save in an image format you open the file in the editor and save there, as 99jon said. AFAICR, it's always been this way in PSE. The other options are in bridge and the other Creative Suite programs.

How to transfer more than 1 file usong bluetooth t...

Can anyone tell me how to transfer more than one file via Bluetooth. I am using Lumia 720.

Hi,
My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
Open Windows or Folder Explorer
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
Look for PhotoshopElementsEditor.exe
Right click on the file and select Copy
Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED - you should get a prompt asking if you want to continue - you do
Close the Explorer
In the Windows Control Panel, select Default Programs
In Default Programs, Select Associate a file type … - it will take a while to display the list
Scroll down to the type you want to select - say .jpg and select it
Click on the Change program button
Click on the Browse button
Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
Click on OK and close the Default Programs
Now try your tests. I can get multiple files to open as well as retain Expert mode.
Good luck
Brian

Will photoshop elements work with Encore or do I have to have the full Photoshop

hi there,
I'm using Premier Pro and Encore Cs5.5. I do not create fancy menu's. At the most, I put a photo or two on a background of color and some text.
My work is on my Mac. I have photoshop elements on a windows PC in another room. I've been going between the two machines using photoshop elements on the PC to create the menu's and then sending them over to the mac for Encore use. Obviously, this is not optimal and I expect the PC to die any day now. Therefore, I thought I would buy Photoshop ELements for my Mac.
So, my question is "will photoshop elements" work ok on my Mac with Encore? Or, do I have to get the full blown Photoshop ? Advice?
thanks everyone !

For what you are doing, PSElements for Mac, should be fine.
Unless it has changed recently, when working with Menus in PSE, was the inability to CREATE a Button Layer Set. You can edit them, just not create one. If you are just modifying the Library Menus, and Buttons, there should not be an issue
Now, I believe that you will still not have the full functionality of Encore and PS, where you have the option to "Edit in Photoshop," right from Encore. What this does is create a TMP file, for the Menu, that is linked back to Encore, then launches PS, and Opens that linked TMP in PS, and when editing is done, one only has to Save in PS, and those changes follow the link back to update the Menu in En. You will have a slightly different workflow, where you would launch PSE, Open the Menu and edit it, then I would do a Save_As, so as to not overwrite the original, then in En, Delete that original, and Import the Save_As file as a Menu, and use that. It would be easiest to do all of the Menu editing in PSE first, then Import those as Menus into En, and just use them, as you would a Library Menu. Remember, you need to start off with a Menu, so that you have the Button Layer Sets, as you cannot create those. A bit different workflow, and not quite as convenient as Edit in Photoshop. As I do not have PSElements to test with, check me out that Encore will not link up to PSE and offer "Edit in Photoshop Elements," but it is my understanding that it will not. I just cannot verify. Also, check the latest version of PSE (you should be able to do this on the PC, while it runs) can now create the Buttons' Layer Sets. PSE 8 could not, and I do not believe that that function has been added to PSE 9.
Good luck, and with those exceptions, PSE 9 for the Mac should be just fine. You might want to wait a month, or so, as PSE 10 and PrE 10 should be released around the end of Sept., or the beginning of Oct., if history holds true. Do not know what will be in PSE 10, but maybe Layer Set creation?
Hunt

How to put own mid. file into N5300 Flying Finger ...

I always get this message: access denied!

Which camera are the camera raw files from?
If your able to open the files in the camera raw dialog, then after you done adjusting the image, press the Open button and in the pse 11 editor go to File>Save As>Jpeg

FLV Skin embedded in video?

Is there anyway place the skin inside of the actual swf that
contains the FLV component? I am making a player that just has a
pause/play button by customizing one of the skins but would rather
not have it deployed separately.
Maybe someone has seen a tutorial on how to make a player
built directly on the time line with out using a skin at all?
Thanks in advance!

You can just use component buttons and link them to the FLV
Playback component using actionscript. Drag the FLVPlayback
component to the stage and give it an instance name like vid. Then
drag FLV Playback Custom UI components (in the component window) to
the stage. Give them instance names as well.
Then this is the script you put on the frame:
vid.playButton = ply;
vid.pauseButton = pse;
vid.stopButton = stp;
That assumes you gave the play button an instance name of
ply, the play/pause button the instance name pse, and the stop
button the instance name stp.
EDIT : nice, you typed it faster then me ;) haha - sounds
like good advice!

PsE 8 Mac, ACR 5.7, no "Open Image" button in ACR?

A forum search was unproductive, so I apologize if this question has an obvious answer.
I've been a user of the full version of Photoshop for many years. Now I find myself temporarily using PsElements 8 and ACR 5.7 on someone else's iMac.
After editing an image in ACR from Bridge CS4 (the one that comes with PsElements), I don't see an "Open Image" button in ACR. How do I open the image in PsElements 8?
Puzzled. Is this a sign that ACR is not installed properly?
Thanks in advance.

Thank you for your reply, Barbara.
I am fully familiar with the full version of ACR that comes with the real Photoshop. That's what I use at home on my desktop machine.
It's the PsElements version that I know nothing about.
The last paragraph of your post may hold a clue, but there's more to the issue I'm seeing here. As you well know, the Mac version does not come with the Organizer, but with Bridge CS4. I followed the PsElements-specific instructions for the ACR 5.7 download, as follows:
To install with Adobe Photoshop Elements 8:
NOTE: You must follow all of the new instructions in order to
successfully install the Camera Raw Plug-in for Photoshop Elements
1. Exit Photoshop Elements and Adobe Bridge
2. Open the download file and double-click CameraProfiles.dmg and follow the on-screen instructions.
3. Navigate to the root of the local disk (not the user's home folder).
4. Navigate to: (Please read directory carefully)
Applications/Adobe Photoshop Elements 8/Plug-Ins/FileFormats/
5. Copy the existing plug-in to another location (for example, a new
folder on your desktop). Ensure you keep this version in case you need
to revert back.
6. Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4, and overwrite the exiting file.
7. Launch Photoshop Elements or Adobe Bridge.
That works fine for PsE 8 but does not let Bridge see, preview or open RAW files. I had to go ouside the instructions and put another, additional copy of the ACR plug-in either in ./ Library/ Application Support/ Adobe/ Plug-ins/ CS4/ File Formats/ Camera Raw.plugin or, alternatively, in ./ Applications/ Adobe Bridge CS4/ Plug-Ins/ , otherwise Bridge shows me only generic icons for the raw files.
The
Applications/Adobe Photoshop Elements 8/Plug-Ins/FileFormats/
location does work as advertised for PsE, regardless.
My guess is I should uninstall PsE and Bridge, re-install both and then update to ACR 5.7.
If that still doesn't work, I'll see if there is a PsE version 9 for the Mac. The computer owner barely uses PsE as it is and does not want to mess with the full version of the real Photoshop.
Personally, I'll be happy to go back home on Monday and forget this ordeal with PsE. :-/
With the above instructions—taken from the Download page—there is no way to see thumbnails and/or previews of raw file in the Bridge provided with PsE. Adobe has definitely gone down the tubes—and I know you're not Adobe.
Barbara B. wrote:
…Basically in bridge acr, you use the save button to save in the format of your choice and then open that file into PSE if you wish.
Wow! That is certainly NOT the case with ACR hosted by Bridge in the full version of the real Photoshop!
Thanks for the help. Much obliged.
Wo Tai Lao Le
我太老了

Button im Volleditor in PSE 8

Similar Messages

Maybe you are looking for