Button in report

I tried to create a button on report to display the picture of the current emp record .But i couldn't make ...can someone tell me the correct steps i have to follow ?
Thanks in advance

Hi,
Which Reports Version you are using? From Reports 9i onwards, buttons are not supported.
regards,
Senthil

Similar Messages

Print Button on Report

Dear All;
Can I place a button on report, and whenwver I will prees it then it will send automatically print of this report on bydefault printer, without out open printer information. Thx.

please go to the reports forum

Disabling Print button on report

Can sm1 help me how 2 disbale print button on report
tia

Hassan,
I am not sure if this is possible. Can you ask this question in the Reports forum here on OTN.
Frank

Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion

Hi
I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
My collegue who has the same roles is able to access it.
Regards
Avinash

I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Sub Total Button in Report Painter Output

Hi,
I am working on the Balance Sheet Report in the Report Painter and i am trying to display the sub totaling display in the output.
In this i had defined the row which is based on the range of Account Number and it has the series i.e. 100000,30000,200000 etc..
Is it possible to display the output sub total on the basis of the Account Number Series which is mentioned above. As in a ALV Report we have the sub total button in report output.
If it is,then please provide me guidelines for it ......
Edited by: ricx .s on Jul 29, 2009 6:47 AM

Hi,
Try this code,
it working,
Data : X_SORT      TYPE SLIS_SORTINFO_ALV,
IT_SORT     TYPE SLIS_T_SORTINFO_ALV,
X_SORT-SPOS = 1.                                " Field number of ALV on which u want to sort
X_SORT-FIELDNAME = 'SEGMENT' .     " field name
X_SORT-TABNAME = 'IT_ALV1'(001). "table name same as ur alv table name
X_SORT-UP = 'X'.                                   " put up as 'X'
X_SORT-SUBTOT = 'X'.                      " Sub total allowed
APPEND X_SORT TO IT_SORT.          "append
CLEAR X_SORT.                                "clear x_SORT
"in ALV_GRID_DISPLAY pass the it sort in it_SORT
IT_SORT                 =   IT_SORT
Thanks
Arun Kayal

Test Report button on report queries

Does anyone know the code/javascript/url behind the test report button on report queries component?
We are having DSN problems using the print url given on the report query. The URL works for some of our developers and not for others.
The test report button on the report query appears to work for everyone but I do not know what is behind the "Test Report" button. If I could recreate the test report button on our page this would be GREAT!
Can anyone help?
Thanks,
Frank

Please see here: {thread:id=2307009}
and here: http://www.oracle.com/technetwork/developer-tools/apex/freq-solved-faq-101785.html - Issue 10.
Please let us know if this helped or if it's something completely different.
Regards,
Howard
Edited by: Howard (... in Training) on Apr 5, 2013 1:18 PM

ADDING RADIO BUTTONS IN REPORT NEAR MISS (EHSM-NWBC)

Hi Experts,
I am new to this EHSM Enhancements , I have a requirement to add 3 radio buttons in Report Near Miss ( EHSM-NWBC ), I am not understanding this BOPF firm Enhancement .So please provided me the required information .
Thanks & Regards.
Bhushan K.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

Enhancement request: Buttons in report regions

Buttons in Report regions (usually) operate upon the data shown in the report using form input elements like checkboxes, radiobuttons, etc.
When the report returns no rows, the buttons look silly in an empty report region. Clicking them might also do some harm depending on what the after-submit processes do.
IMHO it seems like a worthwhile enhancement for Apex to automatically suppress the rendering of the buttons if the report returns no data (it could piggyback upon the 'No Data Found' message under Report Attributes).
Thanks

Or maybe conditionally? I can think of a case where I get no data back and I want to do something with those buttons, such as "create a new record". I often use form input elements there as filters, so it's possible for our users to come up with a combination of filters that comes back with "no data found" and they need a way (mmmmmm, buttons) to reset the filters and get back to something meaningful.
But the ability to condition the buttons (and other stuff) based on whether or not the report returns data? That could be useful, especially for the situation you describe where clicking them might do harm. The ability to disable the buttons on "no data found" (while still displaying them) could also be nice. That way I could display the buttons and keep the same layout, but they wouldn't be clickable.

Tamplate based button in Report Column

Hi there,
Is there any way to put tamplate based button into report column. I have a "sliding doors" css button in my theme's CSS file and I would like to use in in the report column.
Thanks

Yes, I can set "Strip HTML to No" but how would I use my button template. I did create a button template under Apex and modifying theme css file, right now I would like to use this button in my report colum, basically this button will delete uploaded files from the table.
I took this idea to reate my button template: http://woork.blogspot.com/2008/06/beautiful-css-buttons-with-icon-set.html

How to disable "View Report" button in reporting services

Is anyone know how to disable "View Report" button in reporting services, I know can do custom code in report properties, what is the code? I have tried something like this ***button1.enable=false, but it can not success.
Appreciate if anyone can reply me, thanks.

Hi,
The message box don't work on the web because it is of windowform box. Based on your further description, you might want to do the date parameter validation. If so, there is common way to do this:(assume the date parameter value inputed can't be less than 2007)
1) Intert a textbox and input the message used to show the end users if they input a invalidated date value for the parameter, and then set the textbox's hidden property to =iif(Year(Parameters!myPrameter.value) < 2007,false, true)
2) Insert a Rectangle control below the textbox created in step 1, and put all report items in it and set the Rectangle's hidden property to =IIF(Year(Parameters!myParameter.value)<2007,true,false)
After these, if the end users input the date value can meet the project requirement, the report will show the data the end users want, otherwise, the end users will see the error textbox to tell them the parameter value is incorrect.
Hope this help,
thanks,
Jerry

Button on Report

Hi,
using apex 4.1.
I am using this link to make link as a button on report using FORUM given below and created this link as 'APPROVE'
Button in reportI want when i click on link 'APPROVE' . Header id column value should pass as a request into :P63_HEADER_ID item and javascript:apex.submit('APPROVE'); should also work
How i can pass both things at same time in URL ON report column.
Thanks & Regards
Vedant
Edited by: Vedant on Jan 7, 2013 9:18 PM

Hi,
You can use this as the target URL (assuming HEADER_ID is the your column name and you are running Apex 4.x):
javascript:apex.submit({request:'APPROVE',set:{'P63_HEADER_ID':'#HEADER_ID#'}});Thanks,
Rohit

How to create radio button in reports

Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
Nagendra

Hi Nagendra,
    But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
             P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'P_RAD2'.
      SCREEN-INVISIBLE = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Button on report region

Hi..
i want to add button on report region Named ad "Send E-mail"
that should be on each row
so how can i do??
Please Suggest Me
Thanks in advance

969091 wrote:
yes bt
m not gettingLet's say I have a sample classic report on the EMP table as:
select
empno,
ename,
sal,
hiredate
from emp
order by 1Now, I want to add a column "Send Email" to the report that will carry a link icon for every row. I modify the query as:
select empno,
ename,
sal,
hiredate,
'' as send_email
from emp
order by 1Now, I can right-click the "send_email" column and select edit. In the "Column Link" region, I choose a link icon for the column and define target page/URL.
For interactive reports, you can right-click the report, select "Edit Report Attributes" and use the "Link Column" option also.

Execute button in Report List

Hi
I have an ALV wich executes with user commad button a Report List (write) ; then when the Report List is showed i need to execute some action with some button so i set a status gui with the button , but when i press the button any action is executed ; no control is passed to program even if i set the debug mode and then press that button.
Does somebody knows how can i catch a button in report list for make some action , taking in account that the report list was called from an ALV user command button.
Regards
Frank

I think you will need to activate the events of user_command in the events activating subroutine,
form f_eventtab_build changing lt_events type slis_t_event.
data:
    lw_event type slis_alv_event.
refresh lt_events.
call function 'REUSE_ALV_EVENTS_GET'
    exporting
      i_list_type = 0
    importing
      et_events   = lt_events.
read table lt_events
with key name = slis_ev_user_command into lw_event.
if sy-subrc = gc_zero.
    move slis_ev_user_command to: lw_event-form, lw_event-name.
    append lw_event to lt_events.
endif.
endform.                    " f_eventtab_build
form user_command.
if sy-ucomm = 'XXX'.
*   etc.....etc......
endif.
endform.
does this solve your problem?
Edited by: Andre Julius on Jul 8, 2009 4:30 AM

Button in report

Similar Messages

Maybe you are looking for