Button inactive

Hi guys ,
I 've a problem in message mapping, the button "Map Selected Fields and Substructures If names are identical" is always in grey , so I can't use it...Does anybody know why?

hey
if ur problem is still not solved then u might wanna reactive ur session in IR,a lot of times it happens coz of wrong versions on JVM.i know it sounds strange but thats how it solved similar issues for other guys:)
Re: Menu disabled in Message Mapping
thanx
ahmad
Message was edited by:
        Ahmad

Similar Messages

  • How to setup the button inactive in pf-status?

    who can tell me how to setup a button inactive in pf-status so that the button is inactive when the program is running?
    there is a sample of button '&SUM' in PF-STATUS 'STANDARD'(lines 303) of program 'RM07MKON'.

    Hi huanzhiyu,
    In a custom (Z) program you can make PF status buttons and subsequently their OK codes inactive by using the following command:
    SET PF-STATUS 'STANDARD' EXCLUDING '&SUM'.
    And if you need to exclude more than one OK code
    data: itab type sy-ucomm occurs 0,
          wa type sy-ucomm.
    move '&SUM' to wa. append wa to itab.
    move '&ADD' to wa. append wa to itab.
    set pf-status 'STANDARD' excluding itab.
    Hope this helps.
    Regards,
    Aditya

  • HT4847 Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

    I found the solution .,,,
    1) click on your current plan and press done your payment details will appear .
    2) the first section is your plan and there is a botton "change" click on it
    3) it will take you back to the upgrade options
    4) press on the downgrade options
    5) choose the 5 GB and the done botton will be enabled
    6) click on it  you'll back to the step number 2 , here read carefully you'll see that your changes will take effect after the current plan expired with the date.

  • How make a button inactive after the click ?

    Hi,
    how can i make a button inactive after i clik on it ? I need it becasue i have one button which play my symbol (made with this nice course https://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/) but it's not working when the button is in the symbol where there is animation, it's only working when the buttons is a symbol on the stage and on the top of all over symbols, so when i clik on it works and play the symbol that i want but after is still active so i can't place another button at the exact same place of the first because it will play the first button and i need to put 20 buttons, anyone can help me please ? My buttons is just an empty rectangle so i don't talk about turn of the visibility but turn of th "activity"
    Thanks a lot

    If you prefer you can put the code in compositionReady
    Here is a sampe on how to use a next and prev buttons to change data.I have some other examples I will add later but this one could give you an idea on how to do it.
    This one uses data from an array and then moves through the info:
    https://app.box.com/s/78ya0labbydgwogxra2a
    If you are playing symbols then use the rigth scope to get to them.
    I would make a array of the symbol names and use it the same way like I did the array for the info.
    sym.getSymbol(mysymbolArray[i]).play();

  • Snippet New button inactive

    Why is the Snippet New button inactive? It is grayed out and
    I can't create a new snippet. Without that, the whole snippet
    feature is wasted space at this point. I thought maybe it had
    something to do with the html page i had open, so i opened a new
    blank one not based on a template. Nothing.
    What's up?

    Mine isn't greyed out. What version of DW? What OS? Are you
    using the
    context menu (click on the little triangle in the upper right
    of the panel)
    on the Snippet Panel? Mine says New Snippet and it works
    fine.
    I don't even have to have a document open for this to work.
    How is yours
    different?
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
    A Beginner''s
    Guide, Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "BlueSkiesCreative" <[email protected]>
    wrote in message
    news:f0bdad$k7o$[email protected]..
    > Why is the Snippet New button inactive? It is grayed out
    and I can't
    > create a
    > new snippet. Without that, the whole snippet feature is
    wasted space at
    > this
    > point. I thought maybe it had something to do with the
    html page i had
    > open, so
    > i opened a new blank one not based on a template.
    Nothing.
    >
    > What's up?
    >

  • Evaluate button inactive during confirmation posting

    Hi Friends,
    I am working with SRM5.0.
    I have defined a survey and a questionniare for VE during confirmation.
    Have assigned a use group and a user with valid email address to the survey
    In define events for VE, I have made entries for transaction category "confirmation" and have selected "procedure" as "individual-sel. via button".
    I can call the questioonaire from SPRO using right click mouse button on user--> call questionnaire in WEB"
    Also required SICF services are active and I am able to perform VE on portal using Vendor List.
    With these settings, when I perform the VE for the specified product category, I am finding "Evaluate" button inactive during confirmation posting.
    Any hint for my issue? Pls suggest.
    Thanks
    Regards,
    Prashant

    Hi Prashant,
    1) In define events, trying keying in an "*" for vendor & P.Org, enter the source system as your SRM system. Did you assign the survey & questionnaire in this define events. Enter probability as 100. Then try to post a confirmation.
    2) Defining a user group is not mandatory. Hence, you may try to delete this & re-try if point no.1 does not work.
    Cheers,
    Akash

  • Disk utility - can't restore image - button inactive

    Hi,
    Can anybody tell me why the restore button in disk utility / restore tab, is inactive? Even after choosing the source image it stays that way. It's a USB flash drive that I'm trying to restore on. Any help would be great! Thanks!

    Okay, found it. You have to drag the drive onto the lower field. That should do the trick.

  • GRC 10.0 - create role - Edit button inactive

    Hi,
    when trying to create role ((Business, Composite, Single etc.) in NWBC - AM - RM - Role Maintenance --> 'Create', it`s not possible to enter details as everything is grey and Edit button is inactive.
    Also it`s not possible to modify already existing roles which were created using Role Mass Maintenance - Role Import tool. All fields are grey and Edit button is inactive as well.
    Settings are checked, role types are active and user has full access.
    Did someone have such problem? Any idea what can be missing there?
    Thanks in advice for any advice.
    Regards,
    Aga

    Dear Aga,
    please check the following note: http://service.sap.com/sap/support/notes/1700890
    Hope this helps to understand and fix the issue.
    Regards,
    Alessandro

  • Add button inactive in Match record step in Import manager

    Hello,
    In the Main table, I want to see the country data as 'US; United States' in country field.
    I have made both 'country code' and 'country description' as display fields in the country flat lookup table.
    When I load country code and country description from import manager from an excel file, the 'Add' button in Match records step is inactive for both the fields.
    How can I do the matching in import manager without sacrificing my requirement of showing country as 'US; United States' in main table ?
    Thanks,

    answer to this question is already available in forum.

  • Buttons inactive when the playbar reaches the project end

    Hi
    I am using Captivate 6.
    I am creating a standard UI template file. I have added a smartshape button that opens up a PDF file for download/ save. This button is visible and active throughout the Captivate project right from the first slide (timing set to Rest of the project).
    The problem is when the playbar reaches the end of the project, this button gets inactive.
    I checked in the forums and found a similar query in this post.
    http://forums.adobe.com/message/3735858#3735858
    Based on the info there, I checked the frames in the project (in Project Info) and the last frame where the playbar ends. I noticed that the last frame of the playbar is 2 frames more than the frames mentioned in Project Info.
    Again, taking a cue from Lilybiri's comments in that thread, I added one advanced action at the On Exit of the last slide:
    Expression: cpCmndGotoFrame = cpInfoCurrentFrame - 2. (to send last frame count back by 2 frames)
    Assign: cpCmndPause with 1 (to pause the last slide, so that the learners can do any other task on the last slide if they wish to)
    This solves the problem.
    However, is there a way to make this button remain active without using advanced actions? This template will be used by some newbies to Captivate. I feel they might think that assigning advanced actions is complicated task and hesitate to use this one.
    Sreekanth

    Thanks from me as well. I'm trying to make an interactive house simulation game (basic) and hit this issue where the timeline needs to skip to the next segment as several options are available per room (listed one after the other in the timeline). Flash isn't particularly easy to use when it comes to this kind of thing. Is Flash Catalyst CS5 more suited to this?

  • Compressor 3.5 "Submit" button inactive

    Hi Everyone,
    The Compressor (3.5version) "Submit" button is inactive when I try to compress an external .mov file or a file from the timeline. I recently installed Final Cut Studio 3 (FCP 7) keeping the 6 version as well. When I try to use old Compressor (3.0.5) it quits.
    Do you think that keeping both versions is what is causing the problem?
    I have Mac Book Pro, 10.6.8
    2.4 GHz Core 2 Duo

    Sounds like Compressor and Qmaster aren't talking to each other.
    In the menu toolbar, Compressor>Reset Background Processing. Close C 3.5, relaunch  and try submit again.
    If that doesn't fix things, run DIgital Rebellion's Compressor Repair; make sure that the Trash Preferences box is checked.
    Russ

  • "Evaluate vendor" button inactive in vendor list

    Hi friends,
    While trying to call questionnaire in vendor list, I find "evaluate vendor" icon inactive. Following two settings are done:
    1. Created questionnaire and assignmed to survey. Assigned an agent to the survey with valid email address
    2. Maintained all details in "Define events for vendor evaluation in SRM"
    Pls suggest if I am missing anything to activate this button.
    Regards,
    Prashant

    Dear Prashant,
    Wanted to know how you solved that inactive button.
    Same issue with me. I am not able to activate a change button in Vendor aplication view while trying to change data for a vendor.
    could you  reply pls,.

  • Email buttons inactive on some emails

    Certain email buttons are inactive on some of my Verizon.net - received emails: delete, move to folder. These buttons are "greyed". These messages may, going down, display the original message, a "page 2" logo and a block of Java programming comments, and then the message again (as if a "Message Source" display is tacked onto a regular display).
    Also, when a folder messages are listed, and several messages are selected, the delete key does not work. I suspect that the messages of the first paragraph above are blocking the delete function, but how?

    Welcome to the Forum, I am not sure of a via solution to your issue. If you can please install a different browser (I assume you are using Internet explorer... it would also help to know which version you have and it if is up to date)
    AFA another browser I highly recommend useing FireFox  32bit version http://www.mozillafirefoxfreedownload.com/
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • MIGO - Excisable material Good receipt, hold button inactive?

    While creating Goods receipt (MIGO) of excisable material - hold button is inactive.
    i want to hold the document.. plz help to resolve.. very urgently required.
    Award full rewards.  Plz
    vijay.

    Hai .. The purpose of Hold option in MIGO:
    You can use this function to hold the data you are currently entering. No documents are posted. Hold and manage data ..If you have to stop processing a goods movement before you have posted it, For example your purchase order having 10 item of material but receiving from vendor some difference in batch number..in this time .you can hold the data you have entered in the system without posting it.  you can hold your  material document all the details enetered in migo without posting it using  some reference number and date..This means that the next time you use the transaction, you only have to call up the held data instead of having to re-enter it all the data..You can copy the data that you want to hold to the list of held data in show overview icon , by choosing Hold. You can view the list of held data by choosing Goods receipt -> Held data. In this list, you can choose which data you want to continue processing. The last ten pieces of data you held are displayed in the overview tree; you can select them for further processing by double-clicking on them....
    Held data is automatically deleted when you continue to process the goods movement.
    Hope its useful to you..

  • Cinnamon Login Window settings button inactive

    I noticed Login Window settings button is inactive in settings. I installed mdm display manager used in mint and i want to tweak it using standard Settings. Any ideas on how to fix this ? maybe some packages are missing ?

    Same issue here, haven't found a solution yet.
    Traceback (most recent call last):
    File "/usr/lib/cinnamon-settings/cinnamon-settings.py", line 540, in button_press
    self.side_view_nav(widget, None, category)
    File "/usr/lib/cinnamon-settings/cinnamon-settings.py", line 108, in side_view_nav
    self.go_to_sidepage(cat, filtered_path)
    File "/usr/lib/cinnamon-settings/cinnamon-settings.py", line 143, in go_to_sidepage
    sidePage.build()
    File "/usr/lib/cinnamon-settings/bin/SettingsWidgets.py", line 333, in build
    subprocess.Popen(self.exec_name.split())
    File "/usr/lib/python2.7/subprocess.py", line 710, in __init__
    errread, errwrite)
    File "/usr/lib/python2.7/subprocess.py", line 1335, in _execute_child
    raise child_exception
    OSError: [Errno 2] No such file or directory
    Looks like the whole module is missing? Can't seem to find in:
    /usr/lib/cinnamon-settings/modules
    Last edited by LordChaos73 (2015-06-08 14:33:09)

  • Photoshop Action Play Button Inactive

    The Actions Play Button has suddenly become inactive, i.e. regardless of which Action I now select the Play Button remains unclickable.  A circle with bar appears when I hover over the Play Button.
    This happened at some point while I was editing an Image in CS3 (Windows XP SP2).  I had run one (of many Actions) I have successfully.  When I came back to it (or any other Action) a short time later none of my actions could be invoked.  I have tried several different images, I am sure I have highlighted the background layer when I try any of the Actions.  I have restarted the Photoshop, and I have rebooted my computer.  I have done several web searches and seen a few other posts about this problem, but so far have been unable to find a solution.
    Thanks in advance,
    Ken

    hiya!
    this issue might be worth checking up on if video is playing (and you can hear it) but the audio isn't:
    iTunes for Windows: Audio files do not play in iTunes 5 or 6
    love, b

Maybe you are looking for