Button is Quiz Slides

I am creating uniform quizzes to match our template. We
changed the button style we are using in our quizzes to match our
template. When we change the button and use the apply all, on the
other slides the button changes however it creates a box around the
button. What is causing this and how do we get rid of it without
manually changing every slide?
Thanks

Did you delete objects on the quiz slide, like title, question caption...? And when you answer wrongly, you see the Failure caption, but not the Correct caption when you answer correctly?
Lilybiri

Similar Messages

Add buttons to quiz-slide? Captivate 7

Hi there,
I am really having a hard time trying to add buttons to a quiz-slide (fill in the blank).
Is it really true, that there is no work-around? All I need to do, is to use the smart shapes/ image buttons, to link to other slides in the project.
Anyone??
Thanks, in advance
//Niklas

Maybe this blog post could help, because it is not always that easy to have
shape buttons on question/score slides. I encountered several small issues
and tried to figure out workarounds:
http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
Post was written for CP6, but nothing really changed in 7.
2014-09-25 15:41 GMT+02:00 AJIT_M <[email protected]>:
Add buttons to quiz-slide? Captivate 7 created by AJIT_M
<https://forums.adobe.com/people/AJIT_M> in Adobe Captivate - View the
full discussion <https://forums.adobe.com/message/6763021#6763021>

Added help button to quiz slide

I am trying to add a help button to a quiz slide. I would
like ti to pull up a slidelet or go to another slide with a image.
All my buttons and click boxes are disabled on question slides.
Any help would be appreciated.
-Mark

Hi Mark
I believe you could accomplish this as follows:
Create a blank Captivate project that is the same size as
your existing project. Create the slidelet as part of this project.
Define the rollover area and whatever else you need. Be sure to
pause the project so the slidelet will work without the playhead
just moving on.
Publish this as a .SWF. You may DE-Select the HTML check box
so all you end up with is the .SWF.
Open the project with the Question slide. Edit the Question
slide and click Insert > Animation. Browse to and select the
.SWF you just created. This should allow you to insert a Slidelet
on a Question slide.
Cheers... Rick

How to add click box/button to QUIZ slides??

We have a basic quiz for our online course. At the top of the
quiz we have a navigation bar with next, back, main menu, help, etc
which we use a click box to make link.
However, when we're on a quiz slide the click box and button
option are grayed out. You can't access them at all. How can we fix
this?? We HAVE to have the top navigation be functional as it is
for the rest of the slides. Help!

I'm having the same general problem you are.
I got this response a few days ago:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=464&threadid=1374767
Its a little different question but I think the answer can be
applied to both: Its not in the program to allow users to fully
customize question slides. Unfortunate, but a reality I guess.
-mphair

Quiz slides backward movement, the Nav bar dissapears

Hi,
When I enable the back button in quiz slides for CP 6 the nav bar disappears on the previous content slides. It randomly shows up once you click slides from the menu. Is there a way to have backward movement and see the nav bar on previous screens?
I have tried adding the nav bar back to the quiz slides thinking that the user would not be able to move forward until they click the correct answer but that isn't working either.
Any help would be greatly appreciated.

Hi GillianKeisker,
Thank you for contatcting adobe support.
Can you please send us the screen shot for the same because its working fine at our end.
Thanks
Loveesh

Positioning quiz slide objects

I am working on a Captivate 5 project with many quiz slides. The quiz slides were put into the project by someone else. I need to move the various quiz slide objects (submit button, back button, clear button, question text, review area, hint caption, and so forth).
These objects need to be moved to the same position in all of the quiz slides. I've been moving these objects into place one by one and it is very tedious.
Is there a way to set up a style to move all of these objects on all quiz slides at once?

Each of the objects you mention on the quiz slide are a special type of object in Captivate.
So although Object Styles do not allow you to specify the X and Y coordinates of an object, you CAN just move one of these objects on one slide to the location you want them all to be, and then go to the Position and Size accordion in the Properties tab (Transform accordion in Cp5.5), look for the small dropdown in the top right corner of the accordion, and choose the option to Apply to all items.
The name is a bit misleading because it make you think this will actually apply the positioning setting to every item in the project. But the fact is that it will only apply it to items OF THE SAME OBJECT TYPE. So although you would never do this for something like text captions in the main part of your project, you can safely do it for things like Submit, Clear, Back, and Next buttons in quiz slides because each of them are actually totally different object types as far as Captivate is concerned.
Note also the option to Apply to all items of same style. This means you can create custom styles and apply them to just certain buttons or captions if you only wanted SOME items to be positioned in a certain way, while all other items should retain their original positions.

Question on Quiz Slides

Does anyone know how to make the NEXT button on quiz slides appear after you hit the correct answer instead of displaying on the slide the entire time?

Which version?
During the quiz, the Next button is not necessary at all, it is only meant to be used when the learner wants to skip the question, and it is necessary during review. I will mostly hide the Next button all the time when the Question slides are in Quiz mode, by dragging it under the Clear button. Advancing to the next slide in Quiz time is happening after the second step for submitting (if attempts are exhausted). Check this blog post:
http://blog.lilybiri.com/question-question-slides-in-captivate
If you put the attempts to infinite on question level, the user will never be able to go to the next slide until he has submitted the correct answer. Is that what you want?
Lilybiri

Can you make buttons appear "on success" on quiz slide?

I'm not an expert Captivate user and don't know Javascript, so please excuse my ignorance if this question seems strange.
I have a Captivate 6 project with several quiz slides peppered throughout the entire file. In other words, the quiz slides are not grouped together. Each slide, including the quiz slides, has a forward button and a back button.
I would like for users to move forward and backward through the presentation in a linear fashion as they like, and this is working well. However, it would be nice if users weren't able to skip answering the quiz questions. I would like the buttons to appear after the user has answered the quiz question correctly, and then I would like the buttons to stay on the slide thereafter.
Is this possible? Do you have a Javascript resource I could use for the "on success" action, or what other solutions do you recommend?
Thank you!

Hello,
When you are talking about the default buttons Back and Next that you find on question slides, you don't have much control over them. As you probably did see they do not even appear as separate objects on the timeline. And I doubt that Javascript could realize what you want.
Try first to understand how the work flow of question slides is designed:
http://blog.lilybiri.com/question-question-slides-in-captivate
You can drag the Next button under the Clear button (see blog post), normally Next during a Quiz is not needed, since the second step (Press Y or click on the slide) will move to the next slide.
However the Back button is a more tricky button if you really want to have it. Maybe, didn't check it out, try to hide the back button to the user (make it transparent without a stroke) and have an image appear on top of that button after the first step on the question slide. The invisible Back under the image will remain active, it even has absolute priority over other objects.
Lilybiri

Continue Button on Quiz Results Slide NOT Working Properly

I'm experiencing a functionality issue with the "Continue"
button on the Quiz Results slide:
Situation 1: After initially completing the quiz, I need to
click the "Continue" button on the Quiz Results slide only once to
advance to the next (and last) slide in the quiz movie. This is
fine & works as I would expect.
Situation 2: After initially completing the quiz, if instead
I choose to review the quiz, later when I get to the Quiz Results
slide, I need to click the "Continue" button TWICE to advance to
the next (and last) slide in the quiz movie. This does NOT work as
I would expect.
Any idea why only 1 click is needed in the Situation 1 while
2 clicks are needed in Situation 2? Any way to fix Situation 2 so
that only 1 click is needed?
Thanks much!

CapManZ,
Whether the Continue button on the Quiz Results slide
requires one or two clicks is mysterious indeed. See
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1302278
for another discussion about its misbehavor.
Actually, the number of clicks required depends on how long
you wait after the Quiz Results slide appears, prior to clicking
the Continue button. In your situation 1 you probably answered
questions rather than using the skip button, so you viewed the
question slides for a while prior to arriving at results. In your
situation 2 you probably used the Skip button to zip through the
slides to return to the results screen. Try this. In situation 2,
when you get to the Quiz Results slide, instead of clicking the
Continue button, go get a cuppa joe and then see if a single click
will work. If so please let me know.
I've experimented with a Captivate 2 multiple choice quiz in
a slide show that contained only 10 questions and the Results
slide. I added a text caption with fade in and fade out enabled
(the default) to the Results slide. I found that after the caption
fades in, one click on the continue button advances the slide. So I
used the caption's appearance to help measure the timing.
In the tests below I skipped as rapidly as possible, pausing
at various slides to see how it affected the single click
threshold.
Skip all slides: 28 sec
View slide 1 for 60 sec and then skip: 28 sec
Skip to slide 5, pause 30 sec, and then skip: 13 sec
Skip to slide 10, pause 30 sec, and then skip: 2-3 sec
Answer each slide (took more than 30 sec): 2-3 sec
Skip all slides, click Continue as fast as possible: 2-3 sec
I also reduced the number of question slides in the quiz and
skipped all slides.
7 questions: 18 sec
3 questions: 7 sec
I believe the threshold value (the duration required before
clicking the Continue button advances to the next slide) is
composed of two durations which add together to determine the
threshold. The Result's slide's timeline probably sets the
threshold's lower limit. Clicks prior to 3 seconds are ignored.
Time per slide and number of slides left to go sets the upper limit
for the threshold. The slower the movement, the lower the
threshold.
Several conclusions:
This probably isn't a situation in which the first click is
ignored. Instead the first click reduces the threshold's value to
the lower limit. The second click would then typically occur after
3 additional seconds, particularly if the user is surprised that
the first click didn't work and pauses slightly. A very fast
additional click on the Continue button is ignored as well.
Long quizzes will cause more complaints about the issue
because of what you experienced. It typically takes longer to
answer the quiz than review it.
Perhaps there's a workaround that would alert the user that
the Continue button is ready for clicking. I'm thinking that since
the text caption fade-in coincides with being ready to continue, an
image or the like might do the trick. Any suggestions out there?
Humm, a better alternative might be to show some images of
snacks on the results slide background. Through suggestive selling,
the user realizes it's time for a break and clicks Continue after
returning with that cuppa joe. And the sound you hear? It's the
Captivate developers giggling if they read my conclusions. Too bad
they're mum, since some real info might make it easier to make
Captivate behave. Ah well.
Phil

The "Next" button is grayed out on quiz slides when running in HTML 5 Chrome browser and iPad

Hi,
Has anyone run into this problem for Captivate 8? The "Next" button is grayed out on quiz slides when running in HTML 5 Chrome browser and iPad. The Next button shows in IE/Flash mode.
Thanks in advance for providing your help!
Zhuoran.

Thank you Rod.... I changed the option to "Required - User must take the quiz to continue." Now the next is working .
Thank you for pointing the right direction. But one quick question.. will the above setting affect my assessment? I have set the pass percentage to 100%...
My next question - I have a open course menu (TOC). If the learner clicks the Knowledge check page, the knowledge check page is visible, but if you click any other page from knowledge check, it is not going...... by default, it takes to the next page. From that page, you can click any other page... IS this also related to the above option .. pls let me know..

Quiz slide next button...two clicks?

Okay. Having a weird issue I'm not sure if it's universal or fixable or what. Have you guys experienced this?
On my quiz slides, there's a little bit of a hitch between selecting the correct answer and progressing to the next slide. You get the success caption "good job, hit next to continue." The hitch is that it actually takes two clicks to progress to the next quiz slide. The first click clears the success caption, the second click actually progresses the slide. Is there a reason I'm having to click twice? Is this a universal oddity? Can I fix it so that the success caption clears and the slide progresses with just one click?
Thanks in advance,
Eric

Here are screenshots of the timeline and quiz properties panel. I have the pause moved over and the On Success set to go to next slide... I'm still getting the double click hitch. Note: The grouped smartshapes are actually custom navigation buttons. I'm not using the next button generated by captivate. Could that be the issue? I didn't think it was the cause because we had the same problem with the automatically generated buttons as well.

Quiz Slide Buttons - not holding size in live slide

I apologize if this has been asked many time. I searched the discussions and found nothing.
My quiz slide buttons, CLEAR, BACK, NEXT, SUBMIT are for some reason now smaller in dimension than they were in my project. Now ALL quiz slides render them very small as a default. Whenever I adjust them, both in the Master slide design and in the filmstrip breakpoint slides they do not hold their shape or dimension sizes I adjust them to. The view and size in the Master slide looks right but when I go to FilmStrip they are small. They also are left justified instead of center.
I went into the Themes/Object Style Manager and tried to make adjustment there. It will not give me an option to center the text or adjust the size of the buttons. I am using the "Default Quiz Button Style". The way it was originally provided in Captivate settings.
I also even tried to override this by creating my own image buttons which were of the same dimenstion that the default settings Captivate has for the Default Quiz Button Style which were 170x43px. Even those are shrinking very small.
Any suggestions? Thanks.

I have only the font size available to adjust. I do not see any alignment choices. Please see screen shot.

Submit button disappears when returning to the quiz slide

Hi everyone,
We just upgraded from Captivate 4.0 to 5.5. I'm learning 5.5 differences from 4.0 and have one that I can't figure out.
On the quiz slides, if the learner moves back and forward within the quiz slides, the quiz buttons are fine. However, if they click Back on the 1st quiz slide, then go forward to the quiz slide the submit button flashes briefly then disappears for that slide and all the other quiz slides. I can't find a setting to fix this.
Any suggestions or thoughts would be appreciated. Thank you.

Sounds like a quiz scope issue. If you click back on the first quiz slide that would take you to the slide BEFORE the first quiz slide which is technically outside the quiz scope. This usually results in Captivate locking the quiz.
I haven't personally seen this button disappearing act but you can test whether quiz scope is the likely culprit by adding a scored click box to the first slide of the project, which will then extend the quiz scope out to that slide. If this prevents your quiz slide buttons from disappearing, we know where the issue comes from. That may mean you have still found a bug that needs to be fixed though.

Quiz slides - editing button actions

All,
I have a Captivate 3 project with various quiz slides
throughout that act as section reviews. I was able to have the
submit button send users back to a ToC slide; however, I want the
same to happen when they click "Next" on the quiz slides (if they
just want to skip the review). Is there any way to edit individual
button actions on quiz slides?
Andy

FYI - Captivate REALLY hates jumping around where scored
quizzes are concerned... it seems to expect each project to contain
a single scored quiz and it expects the user to complete that quiz
linearly. The "Allow backwards movement" option in the Quiz
preferences may allow things to work as expected, but I doubt the
user will be able to "retake" a section once it's been completed.
Captivate doesn't seem to like that, either.
If you continue to have problems jumping back to your TOC,
try breaking everything into individual projects and have your
links open the appropriate project to create your lesson flows.
Captivate has no problem randomly jumping between projects,
and doing so will also allow users to retake a section if desired.
PS - Since you've created your own TOC, I'm guessing you're
not reporting user results to an Learning Management System of some
sort. The "link between projects" approach is typically not an
option in an LMS environment since the LMS usually needs to launch
all files itself in order to create the necessary results reporting
interface.

How do I add interactive objects to a quiz slide?

Hello, I'm having a Captivate 5 problem and can't seem to find an answer on the web or in the forums. I'm creating a quiz in which I'd like to ask multiple choice questions. For each answer option I'd like the user to be able to click on something - the answer text, an additional image, something - that would open a web page in a separate browser tab or window. That new window would contain information related to the linked answer option. This way the users can assess the relevance of each option in relation to the question.
I've tried using the "Advanced Answer Option" option but that only opens a window when the answer is submitted. Before I sat down to do this I was thinking I'd just add image buttons on the page, but it turns out that I can't add buttons, text inputs and several other options in a quiz slide.
If anyone has any ideas on how to work around this I'd really appreciate hearing them. Thanks in advance for any help you can give.

Hi Steve, thanks so much for the quick reply!
The Button Widget does the job admirably, I can add it in and even make it invisible with the alpha setting so it appears that an image is the actual link. Totally lets me do what I wished!
Thanks again!
Dave

Button is Quiz Slides

Similar Messages

Maybe you are looking for