Button Mode with Zoom

Hi, Happy New Year!!
When I zoom in on a button and change the state from say UP
to OVER, the focus of my button image moves from screen center, to
a top left position which does not show the full image because of
the zoom. I have to move the scrollbars up/down and left/right in
order to manually re-center my image on the screen. This happens
every time I select a different button state and does not help when
swapping frames back and forth.
Is anyone else having this problem, and is there a fix?
Thanks for your time.

sonnsoff wrote:
> Hi Jim, thanks for reply.
>
> There is no particular 'png' file to accompany my post
because the issue I
> raised relates to the editing of button assets in
general. Can you tell me if
> you have this problem when you go to edit any of your
own buttons? Try
> switching between 'over' and 'down' states. Can you
still see your button state
> in the center of the stage?
>
> Thanks for your time.
>
I haven't had that problem, no.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Similar Messages

Full screen mode with zoom tools

With a PDF that defaults to opening in Full Screen mode, is it possible to make the zoom in and out tools show by default so that the user doesn't have to use keyboard shortcuts?

CtDave,
I already considered doing that, but some pages are quite long which means I'd need maybe 3 pairs of zoom buttons on those pages so that they would still be visible as the user is scrolling. That adds a lot of clutter. I was hoping there was a way to give users a 'floating' zoom in/out bar that would be available as they scrolled down through the page, similar to the navigation buttons that can be made visible in full screen mode if turned on in preferences.

How can I get to DFU mode with a broken power button?

How can I get to DFU mode with a broken power button?

aarons84 wrote:
This is bad, but i tried jailbraking my iphone
You may as well stop there. We can't help you.

My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

HT201263 i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i have the same probelm did u get it solved if yess how ?

Adding a button with zoom function

Hello,
I am working on a product catalog and for this purpose we have used a professional photographer to shoot product photos. The photos are really nice and they can be zoomed in to see every detail clearly. The photos have been inserted into the pdf catalog but because of the limited space they are not very detailed.
Is it possible to add a button or link with zoom function? For example, an icon such as a magnifier or just the word zoom so when a user clicks it, it will zoom in the pre set area to a pre set level and center it.
Sounds quite fancy right? Maybe i'm thinking the impossible... but it's worth a try here :)
Regards,
Rudi

ok. i got it! :))
i have made some changes myself. When the mouse enters button1, button2 becomes visible and button1 becomes hidden (otherwise it is overlapping button2). I have set this in the actions of button1. I would also add the following function: when visible button2 is clicked it hides button2 (this you have already shown and works) and makes button1 visible again. I guess making button1 visible again has to be done with a Javascript in the actions of button2 under mouse up.
I have no knowledge of programming. Can you tell me how to do this?
After i openen the pdf file and used this function and close the pdf file it asks to save the pdf file. How can i prevent this to show up? I dont want this to happen to my customers.
Is it possible to see the exact dimensions of the button? Then i could create both buttons so that they fit in my catalog exactly as i want them, and then check the dimensions and scale my photos to it. Although it seems that Acrobat does something with the photo size already as the photo in button2 is 34mb while the pdf file is only 200kb.
thanks.
rudi
BTW this is really a well thought out solution and i think not many people are aware of this because i have never seen it before

How to get out of tex edit mode with a single button?

Hey,
Is there a way to escape from text edit mode with a single click or button?
So far I always hit CTRL+Enter, then V and then I click away from the canvas so that the paragraph ain't higlighted no more. But thats a pain in the butt! Cant there be a single button for this?
Thaks
AO

Something interesting I just noticed: Double-clicking outside a text box can have different effects according to context.
With the Pointer tool selected, double-clicking on a text box allows you to edit the text. In this "quick edit" mode, double-clicking outside the text box will return you to the Pointer tool.
If the Text tool has been selected manually, double-clicking outside a text box will create a new text box.

Enter recovery mode with broken home button

how 2 enter recovery mode with a broken home button on ipod touch and its disabled with out original computer

Use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode

PS CS6, Full Screen Mode with Menu Bar, Zoom, Brush, Auto Pan

There seems to be a functionality that was lost (or I can't find it) in CS6 that was in earlier versions. When I am In Full Screen Mode with Menu and the image I am editing is zoomed in, I used to be able to shift+click my brush to extend a line. That line would automatically reposition the image when I got to the edge of the screen. Does anyone know if that functionality is gone or do I need to turn "something on”?
1. I open a file
2. I ender Full Screen Mode with Menu Bar
3. I enlarge the photo so that its boundaries are beyond the edge of the screen
4. I enter mask mode (doesn't matter what mode)
5. With my brush tool I start to paint a line by holding the "shift" key and "left-click"
6. I get to the edge of the screen
* this is where PS would reposition the image automatically and I could keep painting my line

Which operating system are you using?

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

IPod stuck in recovery mode with home button not working

Hi, I was restoring my iPod and everything went fine until it was restarting with the apple logo and loading symbol. My iPod's home button hasn't been working in a while so I use assistive touch. Now the iPod is stuck in recovery mode and I can't press the home button, I don't know what to do. Pls help!

Try:
- iOS: Not responding or does not turn on
Whenit says place the iPod in recoivery mode:
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Firefox 29 When I right click to open in a new tab, the tab will open but it will be a blank page. Tried Firefox Safe Mode & with Ad On Disabled Nothing

When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.

Hi UKBlue,
Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed. When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
"Windows cannot find '<path to file>'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls". The number seems to increment up each time it happens.
Now here is the strange part. If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
I Googled the error I was getting and found KB211494. It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case. Any other ideas? This is
really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

Hi,
I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
Using qtp in integrated mode worked previously on the solution manager 7.1 system. Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
Sincerely,
David
Edited by: David Snyman on Mar 2, 2012 7:38 AM

Hi Sida,
Can you check SapLogon.ini file maintaining below location please.
let me know it resolve the isse, can you forward your details to <email removed by moderator>
looking forward your response.
Regards
Naveen
File Location
Use
C:\Windows\saplogon.ini
Enable QTP to identify the Solution
Manager Server
C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
Auto log on to SAP Systems for testing
C:\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
64 Bit OS
C:\Program Files
(x86)\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
32 Bit OS
Message was edited by: Manish Kumar

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Button Mode with Zoom

Similar Messages

Maybe you are looking for