Button navigation musical chairs

I am running into a nightmare trying to set the navigation direction within a title that include 5 chapter menus. I will go through each of the buttons and set the direction, but once I am done, and double-check the buttons, the navigation is nothing like I set. Occasionally, some of the setting stick, but most often, I am going back through the setting again to re-set.
I'm not sure if this makes any sense, as I feel like I am not describing the problem very well. I am hoping it's a common issue, or a simple operator error.
I would be most appreciative of any insight into what I might be doing wrong. Please post any further questions if the issue I'm having isn't described very well.
Thanks!
Van Grafton

Have a look in the 'Settings' drop down box and make sure the 'Auto Assign Buttons' is not checked. If it is then every time you move a button or make a change it will force DVDSP to reassign the navigation, overwriting your changes. If it's checked, just click on it again to remove the check and try to assign your navigation manually again.
Another 'feature' of this setting is that on complex menus with lots of buttons it causes the app to run like treacle on a cold day any time you make a small adjustment to the position of a button. I tend to turn it off except for simple projects, and use the 'Assign Now' option instead.

Similar Messages

Store button on music app won't open? Any suggestions?

Store button on music app won't open? Any suggestions?

This is what I did:
1a. Podcasts app deleted from the iPhone. Doesn't show on any of the home screens on the iPhone. The button next to the Podcasts app in iTunes says "Install". Synching the iPhone with iTunes generates the message "The Podcasts app is not installed on 'Maggie's iPhone 4', so you will not be able to play podcasts on your iPhone"
1b. Clicked the "Install" button for the Podcasts app in iTunes. It now displays "Will Install"
1c. Clicked "Apply" in iTunes to start iPhone sync. iTunes shows "Copying 1 of 1: Podcasts"
1d. Podcasts app icon is shown correctly on one of the iPhone home screens. Previously, the Podcast app icon was a generic placeholder icon.
1e. Resyched iPhone and launched Podcasts app. Everything now working properly.
2 & 3. Didn't have to perform these steps, which implies that earlier suggestions contributed to the fix.
Thanks for your help!

3.1.2 double clicking home button when music is not playing

Is the bug that double clicking home button while music is not playing didn't bring up the iPod control fixed? I don't know it's a design change or a bug, but for me it seems definitely a bug since it doesn't give anything good. Clicking home button once already terminates the application, why would anyone use double clicking to exit the application too?
This is why I'm still using 3.0. Is this fixed in 3.1.2?

It's a design change, not a bug. Although I do have to agree with you on that I preferred what double-clicking the home button originally did. There is even settings (in general settings if I can remember right) on what double-clicking the home button performs, but that isn't even an option on it.
And nope this is not fixed or redesigned in 3.1.2.
Hope that answers your question,
Enjoy!

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy

TS3274 music won't play, play button on music not running

music won't play, play button on music not running, closed all programs and restatred twice, still won't play

Here is the list of supported codac formats supported by Android and like I thought, WMA isnt listed as a supported format unless a 3rd party app was installed that WMA worked with but the native OS does not have support for the file you are tring to play...
Check out formats at http://developer.android.com/guide/appendix/media-formats.html
Update: Looks like I missed something because I found a post that reports they will work but Android site says they wont so I guess its one of those situations if they work that fine but if they dont, dont be suprised. All I can say is it would be simple enough to convert the files to MP3 and remove this restriction.
http://androidcommunity.com/forums/f41/wma-format-3359/

Since I've installed iOS6.0. I can't find the repeat en genius button for music on my screen. Can someone help me out?

I can't find the repeat button my music. Does anybody have the same problem or does anybody have a solution? Thanx for responding!

Sign in, activation, or connection errors | CS5.5 and later
For your payment issues you will have to contact ales support.
Mylenium

The play button in music will not engage

The play button in music will not engage. Just stays on pause. Also no sounds on the iPad.
I have done all the usual checks with volume, mute etc, need help.

Sounds like a software issue. Restore iPad via iTunes.

I have read most advise re audio books but I do not have a more button in music?

I have downloaded and paid for audio books through the store but can not play as I can not find them, I have no "MORE" button in music?

hi Matt, or someone else
Only rarely do I get an email larger than 1000kb. But not matter how small the email, even if only a few kb, Thunderbird truncates every single one, and after I have "untruncated" a few emails, the server refuses to let me untruncate any more for a few minutes. I have used the Thunderbird Disk Save tool for years previously with no problems, and I think this happened when I changed it from 500 to 1000kb a few weeks ago (may have been due to a Mozilla update). I truncate large files because I pay $45/month for 4GB of usage, with absolutely no option to Telstra because I live in the bush in Queensland and Telstra wireless is our only choice for broadband. I use Windows Security Essentials and don't know how to turn off email scanning in it if indeed it does scan my emails (have always assumed it does, but can't find a way to see if it is). In any case I wouldn't want to have this feature off permanently. This problem with truncating all emails has occurred after I started to use Windows Security Essentials. Any more targetted thoughts please to what I've explained above.

I can't reload my music, just apps and books...there's no button for music, can you help me

My problem is, that I can't reload my music.
I followed the instructions but there should be a button named "music" in the bought articel(i hope thats the correct word, I'm not from england/America:) ) section...and exactly thats missing

Hi again Limons,
just got your last reply per mail, re: 'presently only available in the USA.'
Unfortunately, you're right. Just found this article: http://www.digitalmusicnews.com/stories/061011icloud
seem like it's going to be a while before this gets sorted out . . .
Frustrating outcome to my question, but thanks a lot for helping me sort out what the problem was :-)
All the best to you.

New ARB Issue: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
 
 
 
A new ARB issue has been posted to the flex open source site: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
 > contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

ARB Issue Committed: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C62B9EEA.82F3%[email protected]>
Thread-Topic: ARB Issue Committed: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uACeTE1U
In-Reply-To: <C6277898.7F37%[email protected]>
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324878165_1545235"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324878165_1545235
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
the ARB issue at:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+declara
tive+states
has been updated with a decision (in short, keep the status quo).
Ely.
--B_3324878165_1545235
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>ARB Issue Committed: Button navigation and Declarative States<=
/TITLE>
</HEAD>
<BODY>
 
 
 
<BLOCKQUOTE><=
SPAN STYLE=3D'font-size:11pt'>the ARB issue at: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
has been updated with a decision (in short, keep the status quo).
Ely.
B_3324878165_1545235

graf_ix_guru wrote:
>
> Hey everyone I am new, and really could use some help.
> I have created button symbols in Fireworks with Pop-Up
Menus. As of right now
> I have 4 states. The up, over, down and over while down.
Everything is working
> great except when the user clicks on the navigation
button they get taken to
> the top of the page.
On click should open a new page, yes? So it won't matter.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

IOS 5 iPhone 4 no repeat button in music but its stuck on single repeat so i have to manual click next to hear the next track ***!!

iOS 5 iPhone 4 no repeat button in music only shuffle but its stuck on single repeat so i have to manual click next to hear the next track. Very annoying i dont even want to listen to my music. Even on shuffle it was pick a random song then just repeat that track.

With the track selected and olaying, (either the 'musical note' or 'artwork' showing), tap once in the centre of the screen to bring up the sub header - the original 'repeat', 'repeat once' and 'shuffle' icons are displayed - tap once again to hide the menu. Hope this helps.

My iPod 5th generation are connected to itunes but i can't navigate in every buttons (apps, music, ...) What can i do ?

My iPod 5th generation are connected to itunes but i can't navigate in every buttons (apps, music, ...) What can i do ?

This means you will need to put the device into a Forced Recovery Mode in order to restore the device. You can do this by connecting the device to your computer, holding the Home & Power buttons together until the device restarts with an Apple Logo, once you see this logo pop up remove your finger from the Power Button continuing to hold down the Home Button. You should then see a prompt within iTunes stating that it has detected a Device in Recovery Mode. Proceed through the restore prompts and it should be ok to use again.

3.1.3 double clicking home button when music is not playing

Is the bug that double clicking home button while music is not playing didn't bring up the iPod control fixed? For me, it seems definitely a bug since it doesn't give anything good. Clicking home button once already terminates the application, why would anyone use double clicking to exit the application too?
This is why I'm still using 3.0. Is this fixed in 3.1.3?

Jeong-hun Sin, 3.1.3 has the same issue, and I do not think Apple is ever going to fix this issue. They still haven't even fixed the live updating playlist sort order issue...
roaminggnome he's referring to a pop-up controls issue that has been talked about on this forum ever since the release of the 3.1 firmware.
http://discussions.apple.com/thread.jspa?threadID=2151438
In 3.0 and older versions, if you're in an app/game you can double-click the home-button to access the iPod pop-up controls to resume the playback of a song/podcast that had been previously paused/stopped.
In 3.1, if a song had been previously paused you cannot launch the pop-up conrols to resume the playback of the song. You're forced to exit the app that you might be in (lets say safari, or a game), and then resume playback using the music app.
Jeong-hun Sin, I upgraded to 3.1.3 a few days ago, and have found a few improvements:
- Many 3D games are MUCH smoother/faster under 3.1.3, than 3.0. I downgraded back to 3.0 just to see if I was just imagining things, but games like Coconut-racer, and Asphalt 5 were not as smooth as they were under 3.1.3.
- If you happen run apps that have live video streaming where the video playback controls do not appear (e.g the BBC world, Al Jazeera news, sure there's more), the iPod Touch no longer randomly reboots when using those apps.

Can some one please confirm if Itunes radio is working in india? as i dont see the itunes radio button in music app :(

Can some one please confirm if Itunes radio is working in india? as i dont see the itunes radio button in music app

It is currently only for the USA.
Sanjay Raju wrote:
Can some one please confirm if Itunes radio is working in india?

Button navigation musical chairs

Similar Messages

Maybe you are looking for