Button not visible in IE7 until clicked

Perhaps not entirely ADF-related, but we have a login page in our ADF/WebCenter 11g PS5 application.
In IE7, the submit button is not shown upon rendering the page, but suddenly appears when the form is submitted when pressing enter. Anyone seen this behaviour before?

It might very well be the same issue as described here:
http://www.kalzumeus.com/2009/10/23/the-ie-css-bug-which-cost-me-a-months-salary/
if I check the source of the page in IE the button is there - I just don't see it. It might be somewhere off the grid.
Anyone experienced this with ADF?

Similar Messages

  • Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss"  button at the botom of the screen.

    Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
    I appreciate if you could provide me support to solve this problem especially it consumes the battery a lot.

    Another post originally dated 5th Feb, 2012 with a slightly different unheard of error "%7D/JC".
    https://discussions.apple.com/thread/3710903?start=0&tstart=0
    The user also claimed that he didn't meddle with iOS. No solution could be found though.

  • Help button not visible in off-line version

    Why is de help/information button not visible in the off-line version. The web-based version is oké. In use Adobe Accrobat version XI.

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Reset button not visible in settings, help?

    Reset button and security button not visible in general settings on my iphone 4 . How do I restore them?

    if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

  • Approve Button not visible in Tasks for Leave request in Tasks- MSS

    Dear gurus,
    Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
    Any suggestions....
    regards,
    Rajasekar.

    hello Bala,
    there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
    Thanks alot Bala..
    In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
    Regards,
    Raj

  • Interview, Contact  etc buttons not visible on Hiring Applicants Form

    Hi,
    Interview, Qualifications, Schools & Colleges, Contact buttons not visible on Hiring Applicants Form.
    Is there any profile option , so that the above mentioned buttons are visible ?
    Thanks,
    Angelica.

    Hi Jhansi,
    Thanks for the reply.
    We tried the mentioned steps, but unable to view the required buttons.
    Can you let me know if there is any profile option for the same, cause we are able to view the button in another instance, but not in the one that we are working on.
    Thanks,
    Angelica.

  • Message mapping (data flow editor, data dependcies  buttons not visible)

    Hi,
    In my SAP PI...IR ...in message mapping screen some buttons are not enable/visible like
    data flow editor, data dependcies,clear mapping  buttons not visible)
    any oss notes/help will be appreciated.
    Thanks

    Hi,
    This will help you
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    Go for 1.4.X version than 1.6.X The Problem will be resolved
    Regards
    Sangeetha

  • Button not visible in standard sap-toolbar

    Hi All,
    I have added a custom key to standad SAP tollbar using Aceess key in tr-M52N.
    But that custom buttom is still not visible in tool bar. Can anybody guide me?

    Hi,
    It may be that the function is being disabled by authorizations.  To prove this, you could do the following...
    Before you run the transaction you modified, go into debug with /h.
    Run your transaction code - you should start up in debug.
    Use menu option Breakpoints / Breakpoint At / Statement.  Input the command SET PF-STATUS.
    Hit F8 to continue until the SET PF-STATUS command is found.
    At this point, if the SET PF-STATUS statement ends with EXCLUDING tablename (where tablename is an internal table), then double-click on the internal table and display the entries in it.  If your function code is included in this table then that's the reason why you don't see the button.  You'd then need to work back to determine why your function code is included in the internal table.  This assumes the function code does indeed already exist in the GUI status used in the screen.
    Regards,  Andy

  • Applocation toolbar button not visible

    Hello All,
    I have added a button to applcaiton tool bar, in a PF status. But this button is not visible on screen.
    This is 35th Button
    there is place in application toolbar, as we are excluding few buttons
    the same PF satus  is getting called, where i inserted button
    The functin key is working, but the butto is not visible...
    I am clueless, why its not visible. Please give me some ideas
    Thank you
    Amar

    Hi,
    It may be that the function is being disabled by authorizations.  To prove this, you could do the following...
    Before you run the transaction you modified, go into debug with /h.
    Run your transaction code - you should start up in debug.
    Use menu option Breakpoints / Breakpoint At / Statement.  Input the command SET PF-STATUS.
    Hit F8 to continue until the SET PF-STATUS command is found.
    At this point, if the SET PF-STATUS statement ends with EXCLUDING tablename (where tablename is an internal table), then double-click on the internal table and display the entries in it.  If your function code is included in this table then that's the reason why you don't see the button.  You'd then need to work back to determine why your function code is included in the internal table.  This assumes the function code does indeed already exist in the GUI status used in the screen.
    Regards,  Andy

  • Flash buttons not working in IE7 and Chrome

    Here's my website where the problem is occuring www.bakercreative.co.uk
    As you can see the Flash buttons animate, but when clicked they should go to a new html page.
    I've tested it in IE8 and Firefox without any problems but it's not working in IE7 and Chrome.
    Does anyone know what the problem is? Could it be the html code or the flash file itself?
    Thanks

    Hi, Glad you were able to solve that issue with the buttons and Chrome. Any small thing can cause big problems!! LOL
    I'm sure IE7 will test out ok, IE6 did Your website is very nice and has a variety! I hope it all comes together for you.
    Thanks,
    eidnolb

  • "Display Form" button not visible in UWL preview

    Hi Friends,
    We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
    Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
    Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual 
    "Approve" and "Reject" buttons.
    However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
    But for this task, the "Display Form" button is not visible.
    1. Please advice on the possible reasons why this is happening ?
    2. Is there any setting or any SPRO configuration wherin we need to 
        specify the tasks for whom the button needs to be displayed ?? or
        Is it some portal side configuration ?
    Thanks,
    Shashank

    Hi Vijay,
    Goto:
    Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
    In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
    Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
    Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
    Upload this new configuration with HIgh priority.
    Reregister the connector and clear the cache.
    These steps solved my problem. Probably it should work for you too.
    Regards,
    Shashank

  • " change" button not visible in check status ?

    HI,
    We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
    is visible in check status even if shopping cart is under approval
    state.
    But in SRM 5.0 "change" button is not visible in check status if
    Shopping cart is under approval state.
    Please let me know if any one face this issue.

    Hi,
    Goto SU01 and fill in the user ID for which the button is greyed.
    Navigate to role tab
    Double click on the role so that the system opens transaction PFCG
    Select the "personnalization" tab where you will find the WFL security... (don't remember exactly the name as i do not have any system right now)
    This WF security has 4 level.
    By default it is set to none
    Select level 4 for maximum authorization.
    Save, log-off from ITS access et relogon.
    Then the button won't be greyed anymore
    Kind regards,
    Yann

  • Park button not visible in F-63 screen

    Hi,
    I created a role that will alllow a user to park the document using F-63. In DEV it's working fine however when I transported it to PRD. The Park Document button (SAVE) is not visible or deactivated in F-63 screen in PRD.
    Any help is much appreciated? Thanks.
    Regards,
    Threadstone

    Hi Threadstone,
    The GUI-Status ZBVV has got the save-Button PBBP, but the display of it can be excluded.
    You can see what happens, when you set a break-point in function Group F040 (Transaction SE80, Function group, F040, PBO-Module, Status_setzen_zbv, click left of line-number of the line “if yfuncl eq ’P’.”):
    module status_setzen_zbv output.
      tables: with_item.
    *------- Standard-Status -----------------------------------------------
      if yfuncl eq 'P'.
        status = 'ZBB'.
      elseif yfuncl eq char_r.
        status = 'ZBF'.
      else.
        status = 'ZBV'.
        if rfopt2-xcmpl eq char_x.
          status+3(1) = char_v.
        endif.
      endif.
    *------- STATUS setzen -------------------------------------------------
      perform status_setzen.
    endmodule.   
    Another Break-point might be set in subroutine “extab_fuellen” where functions are appended which shall not be used.
    form exctab_fuellen.
      refresh exctab.
      if bseg-koart ne char_k and
         bseg-koart ne char_d                                   "/N394306
      or ( bseg-koart = char_k and lfa1-xzemp is initial )      "/N394306
      or ( bseg-koart = char_d and kna1-xzemp is initial ).     "/N394306
        exctab-okcod = 'ZEMP'.
        append exctab.
      endif.
      if yfuncl eq char_d or
         yfuncl eq char_r.
        exctab-okcod = 'BP'.
        append exctab.
        exctab-okcod = 'PBBP'.
        append exctab.
    Yfuncl has got value D (display) or R (release). It can be, that the user has not got the authority for saving. Please check SU53 or via ST01.
    Regards Wolfrad

  • UWL Approve Reject button not visible

    Hello Experts,
    We have implemented Portal 7.0 SP 18 and configured UWL. All task items are appearing correctly.
    But approve and reject button is not visible in UWL. The same is visible in ITS screen when we click on the task.
    Kindly help.
    Regards,
    Nirmal Sivakumar G

    Hi Soral,
    All workflows from ECC is causing this problem. To be precise I have configured a webflow connector to pull the tasks from SAP Inbox. The approve/Reject button should appear in UWL ivew when we select the task item. But only forward and resubmit options are visible.
    I guess the problem is with SP 18 itself. Coz there are similar threads with the same scenario in SP 18.
    Regards,
    Nirmal Sivakumar G

  • Performance Management: 'Share with Main Appraiser' button not visible

    Hi Gurus,
    I am using Oracle R12.1.3, Performance Management module.
    I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
    However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
    When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
    PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
    Would really appreciate any response which might help.
    Thanks and Regards,
    Rahul

    I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
    Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

Maybe you are looking for