Button not working since it's been placed inside another MC

Hi,
I have a button directly on the main timeline with the
instancename kings_cross. I then have some methods in the main
timeline, which work as they are supposed to when the button is
pressed. However, I have now placed the button inside a MC which is
contained within a scrollpane. I'm using the same code but the
button doesn't work...I fear this maybe a scope problem so if
anyone's brave enough to help me it will be greatly appreciated.

You need to tell the button where the movestation function is
located. Right now, with that code, it looks for it in the same MC
as the button. One way to find out the relative positioning of
everything is to do a preview and then select DEBUG and LIST
OBJECTS and see what the full path to each is.

Similar Messages

  • Home button not working since os5

    Hi, seems like ever since I upgraded to OS 5 on my Iphone 4 the home button does not work all the time. could it be broken?? i have had the phone 9 months and i do not over use it or abuse it. I actually have another phone for work so I do not even use it during the day. Is it just a coincidence that ths issue started after the upgrade or is there a glitch in the new OS?
    thanks
    MSant

    Reset Home button steps:
    (1) Tap Settings App, when it is open:
    (2) Hold Power button until "slide to power off" bar appears.
    (3) Don't slide it, release power button.
    (4) Gently, continuously press Home button for few seconds until home screen appears.
    (5) Done.
    If this does not help, further points to Hardware Problem.

  • Power button not working since 8.1

    I just updated my phone to the new iOS 8.1 and now my power button is not working...does anyone know a solution or a fix other than sending it into apple to get it fixed?

    I just updated my phone to the new iOS 8.1 and now my power button is not working...does anyone know a solution or a fix other than sending it into apple to get it fixed?

  • Tascam FW1082 transport buttons not working since recent Logic update !!

    Maybe there is something I have missed but I believe I have checked all the settings in Logic Preferences and in the OS Core Audio settings. I have removed and re-installed the Tascam 1082 several times from the Control Surfaces setup. Even tried shutting down and restart and powering off and on the Tascam between restarts. The transport and shuttle wheel along with many of the buttons on the Tascam front panel do nothing now except transmit MIDI notes. For example, pressing the play button on the Tascam sends MIDI note A#5 127 velocity, pressing STOP gives me A 5 127, and all the transport buttons including the shuttle wheel are sending MIDI instead of controlling the transport. I have been pulling my hair out for the last few hours trying to figure this one out.
    PLEASE, PLEASE, could someone help? I can't do anything with this mess. I have an important project that I need to finish and I am now at a standstill. The only thing I haven't tried is re-installing Logic. Is it even possible to revert to before this last update without the Time Machine feature?
    Thanks,
    Greg
    PS for some odd reason I also had to create a new account just now in order to login. It won't let me use my previous username and password. ???

    Called Tascam and got it working. Seems a setting in Logic got changed somehow causing transport not to function. Don't know how and Tascam support ditn't either but he said it does happen from time to time. At least I know where to look if it ever happens again. Rock on.

  • Why does the back button not work since I updated to the latest version?

    I updated my browser to the latest version and now the back button doesn't work anymore. Is this just a glitch with my download or is anyone else having this problem.

    Hotels, hotels in cancun, hotels in the Mayan Riviera, hotels in Puerto Vallarta, Cabo San Lucas hotels, hotels in Playa del Carmen, horseback riding, groups and conventions, weddings and events, ritual feelings, transportation, car rental, sub aquatic museum, Mexican fiesta, luxury tours, boat share, spa center, packages in Cancun, relaxing massages, therapies balanced, facials, body treatments, tours in Cancun.
    visita ahora! http://www.cancun-hotel-tours.com

  • Help! Ipad not turning, buttons not working!

    My iPad sometimes stops turning sideways. Lock button, lower volume button not working. iPad hasn't been backed up in 20weeks but i don't know if that has to do with any thing. HELP!!!

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • IPhone 4 middle button not working

    Having problems with the iPhone 4 middle button not working anyone else with the same problem ?
    Thanks

    i have the same problem. since you're software is already iOS 5.1 go to settings>general> accessibility>the settings after triple click home, i forgot what is it called but that would help.

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Navigation button not working in JSP

    JDeveloper10g JSP:
    "NestSet", "PreviousSet" button not working after a search is done on a read-only table. Is this a know bug?
    Please help!!!

    Vishal,
    I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
    Regards,
    Usman

  • IChat Video Not Working since PSP3 bought!!

    Hi guys,
    ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
    1. imac (wireless via Airport Extreme)
    2. BT Vision via ethernet and wall adaptors
    3. iPod touch via wireless
    4. PSP3 via wireless plug and play
    I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
    Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
    network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
    Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
    Take care, and thanks in advance for your help.
    Baz, Belfast, Northern Ireland, Europe!!

    "speedtouch modem!"
    Yes you do.
    Thomson-Alcetel who make the Speedtouch range make this device for BT.
    The Firmware is Thomson-Alcatels with BT Logo-ing.
    This Ethernet 3 connection is probably internal.
    Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
    If not then do and restart iChat to see the new speed.
    In Leopard the Automatic setting is read by iChat as 384K.
    This may be allowing the PS3 to have too much of the bandwidth.
    I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
    If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
    This would have appeared to have been coincidental to any iChat use when you changed it.
    Are you not using UPnP in this device ?
    Which firmware is it up to ?
    Anything above 6.2.2.6 should work.
    Anything starting with 6 and containing letters is later.
    In the .telephony section does it mention which port are open ?
    9:00 PM Sunday; May 11, 2008

  • Home button not working on iPad 2 after iOS5.1.1

    I got iPad 2 updated with ions 5.1.1
    It worked fine for a week and now the home button does not work. I followed all posts here to reset, restore etc. but nothing helps. This is already a replacement iPad I got for my previous non functional iPad 2 which had battery issues, which apple swapped in store last week.
    Any advice ?

    Update -
    Called apple support and did not get steps to try and was asked to visit apple store. Went to apple store and since the problem is intermittent they did nothing.
    Now the problem is back.
    Also, I notice there are lot of Low memory diagnostics logs which I thik may be leading to home button not working BUT that iOS should handle as part of memory management. I restarted iPad 2 and still memory issue/ home button not working which seems weird
    I am really disappointed and not sure how to get this addressed.
    Apple, please help!

  • Sleep Button Not Working on iPhone 5

    Sleep button not working .. Advice on what Else I should do?
    I've already turned it off & turned it on, & rebooted it.
    I've had my phone since October and this is the first time it's done this

    Morning AskVictoria95,
    Thanks for using Apple Support Communities.
    Installing the latest version of iOS may resolve the issue.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Sleep/Wake button will not lock or unlock iPhone
    To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    If either of the above steps don't work, try turning iPhone off and then on again.
    If the iPhone will not power off, reset it.
    Try to lock or unlock the phone.
    Issue not resolved
    http://www.apple.com/support/iphone/contact/
    Best of luck,
    Mario

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • Scrollable frames. Buttons not working.

    Hello.
    I have a problem with buttons in the scrollable frames.
    I have a slideshow with a thumb's. Each thumb consist of MSO (non active icon and active icon) and clear frame - button to that MSO and to slide foto. The thumb's grouped and placed into the frame with horizontal scroll overlay effect.
    That frame placed into another frame-pull out tab, which have vertical scroll effect. And when I pressed the button, slide fotos changes correctly, but button MSO not working.
    See files from dropbox --  https://www.dropbox.com/sh/rsbf1jto3a39jug/IVcQxaYJOW
    Sorry for my english. I need help very much.
    Thanks.

    Hi,
    I understand that I can use two 'states'  of the buttons. And I tried it. But. Buttons renditions are raster images. And on the retina display we had bad quality. My target was to create vector buttons. With good quality on both displays.
    Any suggestions?
    04.10.2013, в 12:03, Christophe_Quinzoni <[email protected]> написал(а):
    Re: Scrollable frames. Buttons not working.
    created by Christophe_Quinzoni in Digital Publishing Suite - View the full discussion
    Hi (again),
    It seems that you built your stuff in a very complicated way.
    First, try to make simple!
    You mixed MSO and buttons functions. Useless and unfonctional.
    Yous should use only button panel, with two different 'states' ('Normal' and 'Clic').
    See below (no MSO function used at all for the button):
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468602/445-605/Button_ 1.jpg http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468603/448-605/Button_ 2.jpg
    Use the layer panel to easily select the objects you want to modify.
    Please find your file here: https://dl.dropboxusercontent.com/u/46115208/slideshowButton.indd
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5735625#5735625
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5735625#5735625
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5735625#5735625. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for