Button not working when using JumpTo Captivate 8

I seem to be having a problem when using smart objects as buttons, I select use as button, select jumpto and select the slide , in this case home, I have named the home slide home, but when previewing the button doesn't work, this is pretty basic and I'm just about to start a large project , am I missing something or doing something wrong? Would appreciate some help please. 
Many thanks
Sue

Hi there
Do you by chance have question slides? If so, it's possible that you are disallowing backward movement.
Quiz > Quiz Preferences > Settings.
Cheers... Rick

Similar Messages

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

  • Photoshop CC. Colour selection not working when using alt and brush.

    Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
    The alt key is otherwise OK.  It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

    I'd say things sound desperate enough to try resetting Preferences
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
    If that fails, we need to know your operating system?
    Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
    Another other information that might pertain ?

  • HT204168 touch screen function not working when using facetime

    Why is my iPad touch screen function not working when using FaceTime?

    Hi megascones,
    I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Regards,
    - Brenden

  • Why is my touch screen function not working when using facetime

    Why is my touch screen function not working when using facetime

    Hello megascones,
    After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Restart your device. If you can't restart, reset your device.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

    Hi
    Tablet Lenovo S8-50LC
    Wlan(WiFi) Does not work when use Sim Cart(3G).
    What is the solution for this problem?
    Build Number : TABS8-50LC_S000200_150121_ROW
    SoftWarw Version : TABS8-50LC_150121

    Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

  • Layered menu buttons not working when built.

    I have a project that has one menu and one track. The menu has 7 buttons linked to 7 different markers in the track. When I run the simulation in DVD SP, the buttons link fine, and play as they should...but when I build the project and run it in DVD player or burn it to a disk, the buttons do not work.
    If I create a non-layered menu, the buttons will work when built...
    I feel like i'm just missing one little setting on the layered menu
    Thanks
      Mac OS X (10.4.8)  

    Don't forget that a layered menu will normally need two presses to get anything to happen, one to select the button and the second to activate it.
    That said, are you sure that you have got the psd file set up correctly? I would recommend using a background layer with everything on it that you want to appear when not selected, then only adding layers with the changes necessary to show the button selection/activation.

  • SP2013: OK button not working when editing Settings on List app

    Hi, all!  Currently running Sharepoint 2013 under Server 2008 R2.  My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11.  I am currently a Domain Admin for our corp domain.
    Long story short, I've created a test List app.  When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app.  No access spinning, no errors on-screen (also none visible when I view
    the source of the SP page or header), no nothing.  The highlight of the button changes as expected, but nothing else.  The Cancel button will Cancel as expected, but OK does nothing whatsoever.
    My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read).  A Check Permissions on myself yield the following:
    Full Control   | Given through the "~site~ Owners" group.  
    Read   | Given through the "~site~ Visitors" group.  
    Edit   | Given through the "~site~ Members" group.  
    (Note: "~site~" is replacing the actual SP2013 site name above)
    I'm thinking it has something to do with effective permissions.  I just added myself to the Owners group this morning with no effect.  I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either.  Suggestions
    are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
    Thanks, guys!
    Steve

    Hi Steve,
    From your description, my understanding is that OK button does not work when you create a new column.
    Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
    Besides, please try to create a new column with steps below:
    1.      
    Click LIST tab in the Ribbon.
    2.      
    Click Create Column in Mange Views section.
    3.      
    Create your column in the dialog.
    4.      
    Click OK button.
    In addition, please confirm these points below:
    1.      
    Test your issue in another list.
    2.      
    Test your issue with another computer.
    3.      
    Test your issue with another account.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Why does diadem intellisense not work when using scriptinclude or for global object

    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 

    Here is more information on the issue.
    I have a script with a different classes in it (scripted 1).  When I create an object of a class in the script 1 intellisense works.  Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object.  But when I write another script and use scriptinclude(scripted 1) the intellisense does not work.  I also tried a global object and intesllisense does not work.  Is there a way to get intellisense to work when using scriptinclude?  I am working with version 2012. 
    'Test.vbs
    class test
        public function test1()
             msgbox("test1")
        end function
        public function test2()
             msgbox("test2")
        end function
    end class
    'now create a object of the class
    dim oTest
    set oTest=new Test
    'now when you type oTest. you get the following functions to choose from
    oTest.test1
            .test2
    Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
    'Main.vbs
    Option Explicit  'Forces the explicit declaration of all the variables in a script.
    call scriptinclude("c:\1atmp\Test.vbs")
    dim oTest
    set oTest=new test
    'now when you type oTest. it shows none of the functions in the object oTest
    oTest.

  • Microphone not working when using a phone call, Microphone not working when using a phone call

    Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

    Hi Mike
    That was very helpful thank you.
    I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future.  I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
    The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
    Best wishes
    Rob

  • Keyboard backlighting not working when using Windows in Boot Camp

    Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

    Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

  • Elements 11 - Brush tool not working when using layer mask

    My brush tool won't work when using layer mask in PS Elements 11. I also have Elements version 10 installed and there it works fine. If I do the exact same proces in version 11 nothing happens.
    Is this a bug or has something changed in the proces?
    Please help.
    Thanks.

      Make sure you have the mask thumbnail selected - it will be highlighted in blue.

  • Enter Key Not Working When Using Text Tool

    For some reason, my enter key has stopped working when using the text tool.  Instead of making a soft return to a new line, it simply commits the type. What is going on here?
    I'm using a desktop and CS3.

    there are 2 enter keys in key board
    if u enter main key board enter, sentence will go to next line
    In case u enter the key  available in  rightside of the key board , in the cluster of numericals, the type tool is committed.

  • Buttons not working when implimented using Adobe Configurator

    Hi there, i recently learned about a new program called Adobe Configurator, which allows you to build your own custom panels for Photoshop. The program is brilliant, a brilliant idea, and all seems to work perfectly. However, its connection to Photoshop in only two buttons that i have tried to use, seems to fail.
    I set up two of my custom buttons to follow the path of "File > Share My Screen...", and the other to follow the path of "File > Device Central...". However, weather i have a document opened or not, these buttons never work. I get the error message saying "The command "Select" is not currently avalible.". It says this with other buttons, but only when there is nothing open, so it is understandable. So do these buttons just not work, or am i doing it wrong?
    Thanks.

    That's a limitation of many PDF readers on the iPad. They don't support interactivity well. There are a few that do. Here's a posting on InDesignSecrets.com that I did on the subject of differences between PDF readers:
    http://indesignsecrets.com/finding-the-best-tablet-pdf-reader.php
    My favorite is PDF Expert. However, I later found I had to outline the type if I used them in an InDesign-created button.

Maybe you are looking for