Button on tab?

Hi,
I created a button on tab i VA01-02
When I click on that button I get an error V0104. something with FCODE that I use with my button?
Do I have to do something with tables T185 ets..?
tnx.
Adibo.

It looks like you have to configure the screen sequence for the screen.
Ask your configurator to check if the screen sequence has been done.
Hope this helps.
FY

Similar Messages

Substitution For Region, Button and Tab

We are building a general security table with groups of users(LDAP, Banner etc.) and what they can access in APEX. The table will be accessed from a custom function in Authorization schemes in any application or workspace in order to control security all in one location. I want to create 5 generic authorization schemes-one for applications, pages, regions, tabs and buttons that call this function with the appropriate parameters. This is easy in the case of the application and page eg. Security_Function(app_id=>:APP_ID, app_user=>:APP_USER , app_object_type=>='Page', app_object=>:APP_PAGE_ID).
If the authorization scheme is applied to a region, button or tab, is there a way to reference dynamically the current region, button or tab ( in the same way it can be done for the page) in order to make the authorization scheme dynamic and generic?
Karen

Hi,
As I understand it, that's not yet available - see: Determine current renderd item, region,... for use in authorization schema
Andy

Repeat on and Repeat off button for Tab Account Assignment on PO

i all,
Can someone explain what does Repeat On and Repeat Off button in tab account assignment stand for?
These are where I found at ME22N, under tab Account Assigment of Item area.
Your help is highly appreciated. Thanks in advance.

Hi,
Go to bellow link,
http://help.sap.com/saphelp_470/helpdata/en/75/ee0de955c811d189900000e8322d00/content.htm
http://help.sap.com/saphelp_srm30/helpdata/en/30/2f20380217de3fe10000009b38f889/content.htm
Thanks,
Raviteja

Change buttons to tabs

Hi everyone,
I have a scada application and in this application I have a menu.
This menu consists out of buttons now, see the attachment.
But I would like to change these buttons to tabs.
I can't find it in Labview.
Can someone help me with it?
Regards,
Kenny
Attachments:
Button_Menu.JPG ‏12 KB

Hi Nitzz,
It's not as easy to make this, I think.
In the attachment you see the VI that I am using.
The menu is not visible in this front panel, but it will appear when the scada application is started.(but you can not start it in this state, I think)
But when you move the mouse over the screen you can see where the menu is.
There is also a submenu, that I also want to use with tabs.
I hope you will understand my VI, because it is very difficult to explain.
Now you have the VI, maybe you also can have a look at the print function that I am busy with.
I want, by clicking the printer button in the lower left corner, to be able to print the page.
Hopefully, everything is clear for you.
Regards,
Kenny
Attachments:
CG Control Centre.vi ‏744 KB

[Solved] Why is the home button opening tabs?

I have disabled all add-ons and extensions in an attempt to fix this issue. Every time I click the home button a tab is opened, whether I am on a different page or not. Please inform me of a way to fix this issue.

checked the home page option. there was a "|" next to my home page link with a "blank page" inserted after. Tab issue seems to be solved.

Excluding buttons from tabbing

Is is possible to exclude button from tabbing order and just tab between check boxes, radio buttons and text fields for example?

Thanks.
Another question about tabbing. How do I get tabbing from the last field on a page to the next or first field on a following page? I have tried but can't figure it out.

When I click on the home(house) button my tabs become full/over 350 of them at once..and my home page does not come up.

When I click on the "house" button, my tabs line fills up with addresses- over 350 of them and I still can not access my home page.

Hello Salman.
If you're certain that you have configured Firefox [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page correctly], and it's still not working, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

Button or Tab for Movies and Music Disappeared

In iTunes, when I tap Apple TV, the only buttons or tabs that comes up are Summary and Photos.
No button or tab for Music or Movies appears.
Thus, I cannot sync either music or movies.
My Apple TV software is up to date as is my iTunes.
Suggestions?

you have your appletv connected to itunes as a sharing connection only (ie not sync options).
you need to remove the link to itunes and set it up again, this time as a primary library.

Creation of a button on tabs

Hi,
I'm very new to this HTMLDB technology. I have created an application with multiple tabs. and now i want to place a button on each tab, so that when i click on this but i should be navigated to main page. so how do i do?
Message was edited by:
user534750

Once you create your tabs you then need to start creating some pages that will live on the tabs of the application. Buttons live within regions of pages. So create a page, assign it to a tab, put a region on the page, then put a button on the region. Your done!
Earl

I have a problem with FF 4.0b8 and Adobe Flash player where portions of the YouTube page or FF window will black out when I move my curser over buttons or tabs, etc. Any suggestions?

I'm running FF 4 Beta 8 with the latest Flash player (10.1.102.64). When I play YouTube videos, the video is loaded, starts, and plays okay, but when I move my cursor around within the Firefox window, portions of the window black out under where the cursor travels. FF tabs and buttons will black out, or parts of the YouTube page (but not the video). CTL-ALT-Del to bring up Windows Security Panel, then CANCEL will restore the Firefox window, plus the YouTube page correctly (ie black is gone and window has been redrawn correctly). I can open up new tabs and replicate the problem multiple times. I've also experienced this problem with embedded YouTube videos (though it's easiest to replicate the problem direct from the YouTube page.) I don't experience this problem at all with FF 4 Beta 8 in Safe Mode, nor the latest FF 3.x.x. I have tried uninstalling and re-installing the Flash plug-in. Anyone have any ideas?

Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.

I cannot open a new tab any way..by clicking the new tab button on tab-bar, or ctrl/T, or File/New Tab, or clicking on link on current page.

On Windows7 Premium Home Edition, I cannot get a new tab to open no matter what I try. On occasion, if I click on a link on the current page, a second tab will open, but 99% of the time I am stuck using the first tab for everything and using the back button. I have tried ctrl/T, File/New Tab, right mouse click/New Tab, and the new tab button on the tab bar to the right of the current tab.

Uninstall the '''''Ask Toolbar'''''. It can cause that problem.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*http://kb.mozillazine.org/Uninstalling_toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I want to open new tabs with other ones open. So I click the + button for tabs and it does nothing. I right click and click new tab and still nothing. How do I get that feature to work again.

I click the + button to open a new tab and it doesn't do anything, not even open a new tab. I try to right click and open a new tab and still don't work. But if I right click a link and click open in new tab it will work. How do I get to open my tabs again with the + button?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Push Buttons, Radio Buttons, Folder Tabs

Could someone please let me in on the secret to selecting
background colors for push-buttons, radio-buttons and folder
tabs. I've tried the obvious properties with no luck.
I am developing on a Windows NT 4.0 platform using Developer
6.0. I will be releasing my app to the web soon and could
really use some help.
Ideally, I would like to be able to select any color ( i.e. to
match the background color of the canvas ), but so far the only
choices seem to be black, white or a couple of other non-
desirable colors ( bright red, green, yellow, yuck! ). Is a
custom color palette the ticket?
I realize that many button properties are controlled by Windows.
If this is the case, are there any work-arounds? When I
distribute the application, will I be able to offer my customers
the ability to configure Windows to correctly define the button
colors?
I am sure that others have these same questions. I have not
been able to find any answers. Any help is greatly appreciated.
Mike
[email protected]
null

Hi,
1. Disabling Push button.
    In PBO loop at sccreen and check the field name is equal to push button name
    set screen-input = 0.
    modify screen.
    endloop.
2.assign a function code to radio button in screen element it will trigger the PAI.
In PAI during loop at table control check the field value is equal to 'X'.then not down the roqw number and in PBO enable the button based on the row number by looping at screen.
3Assign the fcode to push button.Once the user presses the button in PAI check the focde and see for which line it is pressed based on it call the pop up screen using FM or dialog box.
Regards,
Nabheet Madan
Never give Up.
Edited by: nabheet1234 on May 11, 2009 2:26 PM
Edited by: nabheet1234 on May 11, 2009 2:27 PM

Radio Buttons and Tab Strips

How Do Everyone!
I have 3 tab strips in one selection screen.
Each tab strip has 3 radio buttons on them. How can one
find out out which button is pressed?
e.g. Click on the second tab, the first radio button
     will be highlighted. However, the first radiobutton
     on the first and third tabstrips will also
     be highlighted.
Can the radio buttons be set to null?
Cheers
Andy

Each group of 3 radiobuttons needs to be associated with its own group.
For example.
report zrich_0001
       no standard page heading.
selection-screen begin of screen 101 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: P_rad1 radiobutton group grp1 default 'X'
                                         user-command check,
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
selection-screen end of block b1.
selection-screen end of screen 101.
selection-screen begin of screen 102 as subscreen.
selection-screen begin of block b2 with frame title text-002.
parameters: P_rad4 radiobutton group grp2 default 'X'
                                         user-command check,
            p_rad5 radiobutton group grp2,
            p_rad6 radiobutton group grp2.
selection-screen end of block b2.
selection-screen end of screen 102.
selection-screen begin of screen 103 as subscreen.
selection-screen begin of block b3 with frame title text-003.
parameters: P_rad7 radiobutton group grp3 default 'X'
                                         user-command check,
            p_rad8 radiobutton group grp3,
            p_rad9 radiobutton group grp3.
selection-screen end of block b3.
selection-screen end of screen 103.
selection-screen begin of tabbed block one for 20 lines.
selection-screen tab (15) name1 user-command ucomm1
default screen 101.
selection-screen tab (17) name2 user-command ucomm2
default screen 102.
selection-screen tab (17) name3 user-command ucomm3
default screen 103.
selection-screen end of block one.
initialization.
name1 = 'Tab 1'.
name2 = 'Tab 2'.
name3 = 'Tab 3'.
start-of-selection.
Regards,
Rich Heilman

Buttons in tab canvas.

Dear all,
i have a form in which i want to deal with more than 8 tables so, i used a tab canvas, use a tab page for every table. now i want to put the save, delete, and update buttons on the form.
where to put these buttons on the every page separately or there is any way to put these buttons on the content canvas and when i push it the current tab page's table (block) is effected.
how to achive this functionality?
thanks
Muhammad Nadeem
Oracle Programmer
CHIMERA pvt. ltd.
Lahore
0301-8334434

dear thanks
you are right but i have some others procedures which are specific to the block. so i want when i am in the page A and press the save button. it save the changes in the current block and go to a block which is also on that page A and refresh it.
on all the pages the table is repeated so one block is for data entry and the another is for viewing only.
i have the following code on save button
go_block('gl_users');
commit_form;
go_block('gl_users1');
execute_query;
so when i want to save the changes on the page B this code will also go to the gl_user block and so on.
thanks
Muhammad Nadeem
Oracle Programmer
CHIMERA PVT. LTD
Lahore
0301-8334434

Button on tab?

Similar Messages

Maybe you are looking for