Button on video track via subtitles work but not for audio via story

Hello,
I have a video track with two different audio (two versions of music). I have created two buttons within a subtitle to have them directly on the video
if i make a link to the menu, the button work correctly. But in fact i make a link to two different stories, each with the different audio track
this way it does not work ..
any idea ?
DVSP3

Hey Thierry Arnould,
You could use scripts.
Create 2 scripts each with the function "Set System Stream"
and select the "audio streams" which you want to use.
Then add as Startscript to the corresponding story.
hope that helps
G5   Mac OS X (10.4.7)  

Similar Messages

  • Video plays properly in iTunes but not on AppleTV via Airplay

    I converted a few AVI files to MOV using Quicktime X and then imported the file into iTunes. The videos play just fine in iTunes, but they cannot be played on my AppleTV via Airplay. All the videos appear to load onto the AppleTV (control/play bar at bottom of screen appears), but one video does not play at all and the others only play audio. Again, they all play perfectly in iTunes.
    Video info:
    Kind: QuickTime movie
    Codecs: XVID, MPEG Layer 3
    Audio channels: 2
    Total bit rate: 1,422
    Thanks!

    Try Using Handbrake (free) to transcode to M4v or mpg4 files....... thay are supported by ATV2 nand will appear fine. .avi is an old compression scheme and is not suppoted on ATV2

  • Range extension works but not for wireless.  I can't figure it out.

    I have a problem I have not seen elsewhere:  I have dsl hooked up to an Airport Extreme, which works great in our house.  However, we have a studio / office that is about 100 feet away.  I have no problem extending the range (wirelessly) with an Airport Express so that my husband can get the internet on his computer, which is a desktop and attached by an ethernet cable to the Express.  The problem is that THERE IS NO WIRELESS signal available in the studio.  I have tried adding another Extreme to a different socket and even moved the Express with no luck.  Am I weakening the signal by somehow channeling it all into the desktop?  I just don't get it.  I would love to be able to use the intenet capabilities that are on the 50" HD tv in there, as well as use my laptop / wireless capabilities on my cellphone, but nada.  Not to mention that I have one expensive Extreme sitting unused (and out of the returnable time window.)
    I would certainly appreciate any ideas - But please make them simple because I don't always understand technological lingo.  Thanks!

    I am assuming that the SNR reading of 27 was taken at the location of the Express with the Express powered-off so that we are only reading the signal quality of the Extreme ... correct?
    If so, in general the Extreme has a "better" antenna design over the Express. I would second your suggestion to using a second Extreme to extend the first to see if this improves the Wi-Fi situation at the office location. Another option is to move the Express a bit closer to the Extreme.

  • Network ... almost working but not for all adresses[RESOLVED]

    Hi,
    I have a very weird matter since a few weeks. (can't figure out if it's due tu an update or what).
    I'm currently writing from my arch laptop : so you may say my network works fine.
    Exept, it only works with some sites.
    I mean : I cannot access http://www.archlinux.fr/ for exampe, or many other, whereas other work juste fine.
    (by "access" I mean : use a browser to see the page.)
    This happens :
    - on Wifi
    - on linked network
    - with chromium or firefox
    On the other hand : ping and traceroute works fine for these otherwise unreachable adresses.
    Weirder still : if I reboot on another OS, everything works flawlessly.
    Another PC linked to the same broadband router will show no problem either.
    Accessing the "cache" version of sites from g**gle page shows results.
    I tried reboot, network restart ... now I dont' know what to try.
    Here's my hardware : Laptop is Lenovo Y510
    03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
    kernel 2.6.32-ARCH
    in one word : Help !  ;-)
    Last edited by skai (2010-01-09 12:09:16)

    Hmm, seems I solved it by tweeking with the broadband router.
    (I fed it with a backup DNS, and reactivated DoS firewall)
    Does neither explain why another PC worked well alongside this one,
    nor why another OS gave other results.
    Maybe just a broadband router inconsistency, anyway, l'll consider this fixed for now.

  • Phone is not getting signal to make calls, sometime it works but not for the most part.  I can hear callers at times but they can not hear me.

    Hello.
    Looking for help on how to get a better signal when receiving and placing calls.  Phone got a little wet and is having hard time placing calls and receiving call.  Calls are breaking up most of the time but some times I have 4 bars and phone calls goes through just fine. Noticed phone is having troubling connecting to towers.  Get a call but caller can not hear me when I have only one bar showing on phone.  Phone does hit 4 bars sometime and phone call is clear.  Any suggestion., new phone still learning how to use.   Should I try to reset to factory settings???  Have read lot of negative comments on the web about doing this.  Trying all options before going to the Apple store.
    Thanks for any help or advice.

    I ended up getting a new phone, straight through Apple.  I called their technical support and went through all he basics again and they decided to replace it.  Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours),  I called them back to inform that there was no change, so they set up the order.
    I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway).  Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent.  I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
    Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something.  Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Home sharing is working fine for musics and videos but not for apps. What is wrong?

    Home sharing is working fine for musics and videos but not for apps. What is wrong?

    i had the same issue as everyone here after upgrading to itunes 10.x.  vista could see xp home share.  ipod touch could see xp home share.
    neither could see vista home share.
    after several hours of authorizing de-authorizing, rebooting router etc, i knew it had to be a firewall thingy with vista as xp was working fine
    i went to this article http://support.apple.com/kb/ht2553 and followed the instructions.  itunes was already in my vista exception list.  on a hunch i deleted the itunes exception and followed the steps to add it again and boom it worked!! i could now see my vista machine from my ipod touch immediately.
    something must have screwed up the firewall exception on the upgrade to itunes 10.x
    it worked for me, i hope this helps others

  • GarageBand - Controller's Foot Pedal (in AUSampler) works for one track but not for another

    I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
    The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
    I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
    I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
    Any clues?
    Many thanks in advance.

    HI Bob,
    You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
    Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
    208.67.222.222
    208.67.220.220
    See if that helps.
    Carolyn

  • I have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but no

    i have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but not from the actual device

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1844 Library Issue:  I just imported 2 CD's into ITunes.  They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

    Library Issue:  I just imported 2 CD's into ITunes.  They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.  They show up in the search box, but when I click on the results it just kicks me to ALL my music.  I have imported thousands of songs/CD's before and this is a new one.

    Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
    If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
    tt2

  • Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

    all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
    So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Airplay works for one user but not for another on the same machine

    I have the problem where airplay works for one user but not for another and both users are on the same machine.  For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted.  I have tried restarting the Airport express, restarting iTunes, repairing disk permissions.  Any ideas about what can be done to resolve this?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • After update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
        P/s: And your name is...

Maybe you are looking for