Button set to infinite attempts only works one time

I have a project that includes branching into five topic areas. There is a "menu" type page with five buttons on it. Each button is set to allow infinite attempts. Each button is set to "jump to" different slides within the project. When the user finishes reviewing that branch, they return to this menu page and can either select another button to jump to another slide, or they should be able to go back in and review the same area again. However, the button they just clicked will no longer work.
In my troubleshooting, I have tried using Click Box and Transparent button types. I have tried both with and without the "Include in quiz" setting. I have tried changing "infinite" attempts to "100" attempts. Nothing seems to allow the user to execute the action on that button a second time. Any ideas?

Hi,
I tried to simulate this with a small project which seems to be working fine for me.I am attaching the project using acrobat.com.
https://acrobat.com/#d=i1LzcvsM6gSszRWRCv5XDg
Let me know if this is what you are trying to do.
Sikandar

Similar Messages

HT1661 Imac 2009 imac 2013 target mode did only work one time

My 2009 imac has a broken graphics card. The imac stats up as usual and is ok. To copy some files to my hew 2013 imac id use an thunderbolt to firewire adaptor.
At the first attemp to start up in target mode, is did work very well. The target disk showed up at the new mac and all files were available.
After this succesfull target mode connection, I have problems to get it n a target mode again. After the first time, I cant manage to get it in target mode for the second time. Or I can start up in target mode (without display hard to check) but it don't show up on the new imac.
What am I doing wrong?
Leon

If by DU you mean the Apple Disk Utility program, it is located in Applications/Utilities.
Are you saying you can't run that version?
As far as restarting in Target Disk mode, have you tried to change your Startup Disk in the control panel?
It sounds like your iBook is having problems reading the DVD. An external firewire DVD drive can be attached to either machine. External Firewire/USB cases can be gotten for under $30 and new Sony DL DVD burners can be gotten for under $30.
I built my own external drive that works on all of my Mac's and PC's.

Lightning Connector Only Works One Way

I have two lightning connector cables, and the new 30 pin to lightning adapter, all direct from Apple.
I've found that if I plug them in one way, my iPhone won't charge, but, if I plug it in the other way, they work.
It'sprobably a software issue, as the pins aren't being reassigned. I found that if I have the plug in, and it's not working, I can restart my iPhone 5, and the cable will begin working for this orientation, but not the other way.
I've seen others mentioning this issue, but haven't found a solution yet. I've tried a hard and soft reset so far, and all that does is set the pins to work for one direction on the cable, not both.

I recently tried resetting all my settings. This did not work either.
The cable may appear to be charging, but no juice is flowing. If I reverse the cable, however, it starts charging.
I can't be the only one with this issue, as it appears to be firmware related. There's a chance it's hardware related, but my iPhone was working fine for weeks, with all cables. Now, all my "reversible" lightning cables only work one way.

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

HT204088 I only purchase one time on Mar 03 - $4.99 but when I receive the bill ,it charge me double .

i only purchase one time on Mar 03 - $4.99, but when i receive the bill, it charge me double

Try the 'report a problem' page to contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Adobe will only work 1 time and it will not open anything after that. I have to unstall it and

I can only get Adobe to work one time and after that I need to unstall it and reinstall it to use it agin.I have Windows 8 aopp.

Hi starjeep1,
Please let me know what version of Reader are you using?
Try repairing Reader by navigating to the 'Help' menu and see if it works for you.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightr

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.

Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio

Adobe Photoshop CC worked one time? Now get Problem Report Error?

Adobe Photoshop CC worked one time? Now get Problem Report Error? tried for 3 days to get working... Help! please

I dug a wee bit deeper and thanks to
Sami Vuoritie 1 month ago
I was able to fix it. In Filebrowser-view I had a coverflow-preview mode on. Changing it to list-mode problems are gone!
hope this works for you M00ch?

How to approve the request only for one time for human task in BPM Worklist

Hi All,
I'm having a requirement where i have made the hierarchy in the .task file where in created two users for which i need an approval in a hierarchical manner. But when i'm approving the request from worklist app for one user and the request is going sucessfully to the second user and if i approve it over there it once again coming to first user where i have approve it once again to get the request processed. how to get request processed only for one time when it is approved. Do we need to customize anything
If you did it can anybody can share thoughts on this please. Your help is highly appreciated.
I am not able to see the rejected request at all. where to see the rejected request.
Regards,
CH

Hi,
Following are the some important points you should understand about ESS Leave Request Workflow
1. The Visualization ( how should it appear in UWL and what should happen when you click on a particular workitem) is defined in SWFVISU. Check for TS12300097. Generally, it invokes com.sap.xss.hr.lea.appl/LeaveRequestApprover Java WebDynpro application. Just check whether you are able to get the correct Leave Processing application called when you execute your workitem from UWL?
2. In general it should have option to process the leave request either approve/reject. When the leave request gets approved/rejected the status of the Leave Request document gets changed ( in workflow it is &REQ.STATUS&
3. There is a need to schedule a background job for program RPTARQPOST which will pick up all the documents in APPROVED status and creates an absence record for the same.
4. Apart from schedule job as mentioned above, you also have to schedule a background job for program RPTARQEMAIL, which is basically used to send e-mails for all the documents which are yet to be approved to correct manager.
as you say , you can not see Approve/Reject options from UWL, it looks to me that correct javawebdynpro application is not being called for this task. Just check this !!
Good Luck !!
Regards
Krishna Mohan

UploadedFile & https Only work first time upload ????

I am using 10.1.3.4 Jdev. I use UploadedFile interface to upload files from local PC and ftp files to unix server. My "upload" web page works between my local PC and Unix server, but it only works first time upload file and ftp between
https server (application server--weblogic 10.0) and Unix server. If I just use http without SSL and my codes work fine you can upload file as many times you want and ftp them to Unix server. I used FTP not sftp to transfer files from application server to unix server. Can anyone shed some lights on my head ???? Thx.

Yes. I changed my code to SFT from ftp. it works. Thx. This URL for sftp: http://www.jcraft.com/jsch/ and is very good .
Edited by: albertpi on Feb 11, 2010 8:05 AM
Edited by: albertpi on Feb 11, 2010 8:05 AM

Button set to unlimited. Only does action twice. Why?

I have a button in my training program set to unlimited attempts. It allows the user to click twice, yet it is set to unlimited. What am I missing?

In Captivate, normal interactive objects such as click boxes and buttons on give you one event you can use to execute an action. So their success or failure captions only appear once.
There is an alternative using widgets. The Event Handler widget from Infosemantics allows you to turn any object into a clickable object so that the click will trigger a success or failure criteria. But unlike other interactive objects, it has preferences you can configure to Disable Continue (so that clicking the object does not release the timeline) and Reset Success Fail Criteria (so that the user can click the object and see the feedback captions or execute the programmed action as many times as they want).
More info about Event Handler here:
http://www.infosemantics.com.au/adobe-captivate-widgets/event-handler-interactive
Free trial version for download here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Hide "more" button in a list view, only works for first item in the list

I have the following code in a list view that outputs several dozen items in a web app. The code only works for the first item, how can I make it loop through and execute the test for each item in the list view? The {tag_hide more button} is a checkmark field that yields a numeric 1" if checked otherwise yields a numeric "0".
<div id="more-option">
        <p class="right"><a href="{tag_itemurl_nolink}" class="btn btn-small btn-very-subtle">More →</a></p>
      </div>
      <div class="more-selection" style="display: none;">{tag_hide more button}</div>
      <script>
if ($(".more-selection").text() == "1") {
    $("#more-option").hide();
</script>

What's the URL for the site where you are using this? Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
$(document).ready(function() {
--- your existing javascript here
This make sure the code runs once all the html is loaded on the page. Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
But, I do know that you can probably do this with a lot less markup. Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags. The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element. Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
Here's the fiddle for you to look at: http://jsfiddle.net/thetrickster/Mfmdu/
You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously. My way is neater on the markup side. If you can't get it to work it's likely a jquery conflict issue. My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
Best,
Chris

Google Account BlackBerry Sync only works one way

Hey I just got my BB yesterday... I set up my Google Account on my BB and it downloaded all the data to my device. Then I set up an new Test-Contact and a Test-Appointment (calender) on my BB and it was synced to my google account... everything was fine... After that I set up another Test-Contact and Test-Appointment in my google account to check whether it would be synced to my BB... But that did not work at all... NOTHING WAS SYNCED... I waited for houres but it just would not sync the data to my BB... Same situation if I read or delete an Email in my google account the Email still appears as unread on my BB... But when I read one on my BB it appears as read on my google account... seems like sync is just working one way!
Any ideas?

I'm still new with BB, using it as a loaner phone when my Android got waterlogged. I have the same problem, sort of - in my case, I noticed with Emails that it takes a good amount of time for one read on the BB to show as read in my Gmail. And it's the same the other way except maybe a tad faster.
But I'm not able to sync my google calendar any longer. I read that google was dropping support for BB sync options sometime around 6/1/12, and somewhere in these support forums there's a thread on the topic, stating you can use your BIS account to get them to sync, and in looking for that thread I ran across your post. If I find it, I'll come back and link to that thread.

Problem: Native method only works one

Hi, I have this class that calls the GetShortName method from the windows API.I have created the asociated DLL and everything went quite smooth.
My problem is that when I make a new object of the class GetShortNameA and use the method TranslateIntoShort(String) this only works the fist time.
The rest of the times I try to use this method with other arguments I am getting the same answer that I was getting the first time I call it.
Why can this be and how can I fix it??
I have tried declaring the TranslateIntoShort method non-static, but then the whole thing doesn't work (evena fter regenerating the h file and the DLL).
package alfagui_1;
public class GetShortNameA {
public GetShortNameA() {
static{
System.loadLibrary("GetShortPathNameA");
public static native String TranslateIntoShort(String LongName);
GetShortNameA ShortName = new GetChortNameA();
First time:
ShortName.TranslateIntoShort("C:\Mina Dokument\alfa")-->"C:\Minado~1\alfa"
Sucessive calls:
ShortName.TranslateIntoShort(WHATEVER)-->"C:\Minado~1\alfa"
Thanks for your help

Perhaps if you posted your code we could point out the problem?

Button set to infinite attempts only works one time

Similar Messages

Maybe you are looking for