Button Symbol Editting Mode

I am new to Flash CS4 and have been practicing creating buttons. I am using a JPEG image for the actual button. The image changes color and size depending on the up state or down state or over state. Everything looks exactly as I want it but now I wish that I would had added text next to the button to let the user know what the button does when they mouse over. Herein lies my question. If I go back into the button symbol editting mode, can I add some text next to the JPG for the "over" state? That way when the user mouses over that "contact us" would appear off to the side of the button? Thanks!

Some things are easiest resolved by trying. Yes, you can put just about anything you want in a button frame. You can add extra layers if it makes it easier to isolate different pieces.

Similar Messages

Need to customize close button in edit mode

Dear Experts,
I have a requirement where i have implemented separate close button to come back to normal mode from edit mode (ctrl+shift+E). So i just to remove the close button which comes by default for pageCustomizable . Is there any way to customize this button ?
Jdev:11.1.1.6
Thanks
Sushanth

Hey Daniel,
That was the exact thing i was looking for thank you ! For folks who come across similar customization use case , here is what i did,
For pe:pageCustomizable component in your page, goto property inspector --> Appearance tab --> toolbarLayout --> message stretch statusindicator newline menu addonpanels stretch help newline concurrencymessage
Here is the complete list for toolbarLayout - message stretch statusindicator newline menu addonpanels button stretch help newline concurrencymessage
Thanks
Sushanth

Symbol isolation mode, the pixel grid is not aligned to the ruler.

If you create a symbol that is pixel perfect, exit out of the symbol and go back in, the pixels bleed into each other because the pixel grid is not aligned correctly. Instead it is aligned to the global document grid which the symbol content is not placed in. It makes no sense to align the pixel grid to the global coordinates when the content by definition is not present in it.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
This is a valid bug in Illustrator CS6. Please specify:
1. Do you understand what I am specifying? If you do not I will provide images as I wish to resolve this functionality.
2. Please specify if it has been fixed in Illustrator CC. I do not have an available Win7 installation to test CC but if it is I will acquire one.

Thank you submitted. Input from Adobe's developers or developer relations representatives on this forum to expedite a solution to this bug would be greatly appreciated. As Adobe's products are now on a subscription one would hope it's product roadmap would accelerate with regards to Illustrator considering the necessity of Vector graphics in a market with multiple largely varying resolutions.
If you create a symbol that is pixel perfect, exit out of the symbol and go into Symbol edit mode (from the Symbol Panel or when a symbol's dimensions have been modified) the Pixel Preview grid is not aligned correctly. The Pixel Preview grid is nonsensically aligned to the document's coordinates. It makes no sense to align the Pixel Preview grid to the document's coordinates in symbol edit mode as it causes an inability to see the Pixel Preview without bleeding.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
Again the fundamental issue is that: There is no reason to align the Symbol Edit mode to the global Pixel Preview grid. The Pixel Preview grid should align to the Symbol coordinates.
http://i.imgur.com/KB2CdEx.jpg
The screenshot is in Pixel Preview. Moving the contents of the Symbol in Edit mode from it's correct position to temporarily align to the Preview Pixel grid is incorrect:
1. Because you just moved the correctly placed contents. The Symbol placed in it's parent to prevent pixel bleeding is now incorrect.
2. On a subsequent edit it would be misaligned because as specified, Illustrator aligns the contents of Symbol editing mode nonsensically to the global Pixel Preview grid.
With regards to Align to Pixel grid
1. This is a bug regardless of improvements to Align to Pixel to facilitate an acceptable workflow.
2. Align to pixel grid is not an acceptable workflow:
a. Not possible to place path vertices in the middle of a pixel to facilitate pixel strokes.
b. Mangles rounded corners.
d. It is not prudent to rely on an arbitrary algorithm with regards to forward or backward compatability in creating anything, considering the possibility of mangling and/or changed behavior as specified above.
The workflow to create pixel perfect UI elements is to position vertices absolutetly.

How to get the view in editable mode with OCA button.

Dear Experties,
I am new to CRM WEB UI ,I have got the requirement to develope a view with OCA button on it and when i click on the button it should direct to the second view and it should open with edit mode.
The Source view is table type and target view is form type.
I am able to achieve this but unable to get it in editable mode.
I have added the below code in do_prep_output method but getting dump at the line
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
The error message is
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Please somebody help me on this
lv_display = me->view_group_context->is_view_in_display_mode( me ).
IF lv_display EQ abap_false.
ELSE.
     me->view_group_context->set_view_editable( me ).
ENDIF.
DATA:    lr_tx           TYPE REF TO if_bol_transaction_context,
          lr_entity       TYPE REF TO cl_crm_bol_entity,
           lr_comp type REF TO ZL_BT131QI__BSPWDCOMPONEN_IMPL.
lr_comp ?= me->comp_controller.
Check lr_comp is BOUND.
lr_entity ?= lr_comp->typed_context->BTADMINI->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
IF lr_entity->lock( ) = abap_true.
    me->view_group_context->set_view_editable( me ).
ENDIF.
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
WHILE lr_entity IS BOUND.
    lr_entity->lock( ).
    lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_next( ).
ENDWHILE.
The following error text was processed in the system:
Source type \CLASS=CL_BSP_WD_MIXED_NODE is not compatible, for the purposes of assignment, with target type \CLASS=CL_CRM_BOL_ENTITY
Exception Class CX_SY_MOVE_CAST_ERROR
Error Name MOVE_CAST_ERROR
Program ZL_ZBT131QI_EMAINLEG_IMPL=====CP
Include ZL_ZBT131QI_EMAINLEG_IMPL=====CM00C
ABAP Class ZL_ZBT131QI_EMAINLEG_IMPL
Method EH_ON_EDIT
Line 33
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Thanks in advance!!!

Hi,
in CRM a context can consist of model nodes, value nodes and, unfortunately, mixed nodes. While mixed nodes implement the same interface as model nodes they can't be casted into a CL_CRM_BOL_ENTITY directly. Instead you need to perform the following conversion in order to get the model node from the mixed node:
DATA: mixed_node     TYPE REF TO cl_bsp_wd_mixed_node,
           entity              TYPE REF TO cl_crm_bol_entity.
mixed_node = me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
entity = ?= mixed_node->if_bsp_wd_ext_property_access~get_model_node( ).
Best,
Christian

JSAPI: How can I edit a button symbol?

Hi,
I have written an export script for Flash CS3 using the
Javascript API, and now I want to port it to Fireworks CS3. The
first problem I ran into was that I could not access a button
symbol's state frames via script - the closest I get is up to the
Instance object, but I could not access the frames or layers
inside. I used a for-each-loop to trace all of the Instance
object's properties but did not find anything that could have
helped me.
Then I had another idea: I noticed that unlike Flash,
Fireworks opens button symbols as a new document when I edit them.
And the Fireworks Document object does indeed have a property
called "isSymbolDocument" that returns true if a document "is a
symbol-editing window."
But once again I stumbled upon a problem, namely that I did
not manage to find a "symbol editing command" (the equivalent to
double-clicking it) in the Javascript API. :(
I'd be grateful for any hints, maybe there is even a much
easier way to access button symbol states?
Greetings,
Jochen

I'm not sure if I fully understand your question, but I'll give a shot at what I think it is. If you want a button that can be pressed so that its states go from
"on, off, red., on, off, red." etc. you will have to use a bit of trickery. In this case it is best to use a picture ring to give the controls the image you want and place a boolean button OVER the ring control. Make the boolean control completly transparent, resize it to cover the entire picture ring, and make sure the boolean is ABOVE the ring by using "move to front". You will then have to have a loop checking the boolean button for a press, and then modify the pic ring accordingly and take your "control value" off of the pic ring. I'd suggest finding a work-around if you can, as this is a lot of work to go
through.

Add Content button not rendered inside Portlets on edit mode

Hi,
I have a requirement where administrators will add some external content(Add content) either from taskflow or portlet and that external content (along with taskflow output) will be shown to the users based on some logic performed inside the taskflow/portlet bean code.
This PanelCustomziable should render AddContent button inside the portlet when pressing ctrl shiftE, but its no doing so? Where as the same PanelCustomizable renders AddContent button inside the taskflow on edit page? Any settings or changes needs to be done to make it work in porlet when consumed in portal?
a)taskflow cannot be selected for this purpose, as there will be only a single instance of the taskflow across the portal and it cannot retain runtime MDS changes to a specific instance (Unless we design the ADF taskflow with MDS customization layer). By default, any runtime change in one taskflow instance will be propagated to all the other taskflow instances of the portal.
(For eg.. Admin drops this taskflow onto a page1 and adds a image(external content) using the button AddContent inside the taskflow because of PanelCustomizable and close the page. He drops the same taskflow from RC only to find that the changes he done on page1 is being retained here ..its not resuable because of no MDS per instance)
So we selected Portlet for this purpose, as it has the inbuilt personalization framework. Admin can personalize each portlet instance and drops on the the same page and diff page again. But with portlets, Add Content is not rendered.
Its not just external content, the taskflow / porltet has some logic to perform and displays some output based on the ruleId which is the input parameter.
Taskflow or jsff code
==================
<cust:panelCustomizable id="pc1">
<cust:showDetailFrame text="rules content" id="sdf1"
shortDesc="rules content">
<af:panelGroupLayout id="pg1" >
<af:outputText label="RuleId" id="ot1" clientComponent="true"/>
</af:panelGroupLayout>
</cust:showDetailFrame>
</cust:panelCustomizable>

Can you please post this question to weblogic.developer.interest.portal
newsgroup.
Thanks
"Lodewijk Spijker" <[email protected]> wrote in message
news:3f165945$[email protected]..
Hi,
i am using Workshop 8.1 (GA release july) and i have discovered a bug (ora
feature) with respect to the beta version.
i have created a simple portlet with a view mode and an edit mode. When i
place the portlet on the very first page of a one book portal, it works
perfectly. However, i have a book with three pages and placed the portleton
the second page. Now when i put the portlet in edit mode, by clicking the
edit button, i am directed to the first page of the portal and the portlet
will not show.
Inspection learned that the URL generated for the edit button, didn't
contain the _pagelabel parameter. When i added the parameter manually it
works fine.
A final remark is that the buttons in the titlebar have no icons thebrowser
can load.
hope someone can help me out,
Lodewijk

How to get out of tex edit mode with a single button?

Hey,
Is there a way to escape from text edit mode with a single click or button?
So far I always hit CTRL+Enter, then V and then I click away from the canvas so that the paragraph ain't higlighted no more. But thats a pain in the butt! Cant there be a single button for this?
Thaks
AO

Something interesting I just noticed: Double-clicking outside a text box can have different effects according to context.
With the Pointer tool selected, double-clicking on a text box allows you to edit the text. In this "quick edit" mode, double-clicking outside the text box will return you to the Pointer tool.
If the Text tool has been selected manually, double-clicking outside a text box will create a new text box.

I can't get the patch select buttons to work in edit mode.

I can't get the patch select buttons to work in edit mode. When I select any template, the set buttons or the patch buttons don't work at all. My up and down arrows work fine but I need the on screen buttons to be assigned to my footswitch.

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

How to remove default Apply, OK and Cancel buttons in portlet edit mode.

Hi,
Iam facing problem in customizing default edit mode of portlet, my question is how to remove those default buttons and how to implement our own links for SAVE and CANCEL functionality. Because if we implement our own <form> in edit JSP page then default form will override our own <form> and default buttons works rather then our own forms.
Please someone help me on this.
Thanks
Abhishek

Ah, this one is easy, if im not mistaken, set this tag in your provider.xml
<renderCustomize>false</renderCustomize>
Defines whether RenderManager should automatically render the portlet's container (border and title) in "Edit" and "EditDefaults" modes before and after processing/invoking the page.
This however means you have to write your own renderer for the customize page. Then you can add your own code for the buttons and the events behind them.
I created my own derived container and added this line to my provider.xml
<containerRenderer class="nl.rsm.eventCalendar.myContainerRenderer"/>
This is however for rendering the showmode of the servlet, dont know if this is the same
render class for the editmode.
Do you realy need custom save functionality, Oracle also has something called DBPreferenceStore, you can store self defined attributes into the database. Perhaps this is sufficiant enough.
anyway good luck, if you find out all the correct steps to take, please share, im also interested

HELP - Edge Animate issues - buttons/symbols not working/disappearing in portrait mode on mobile devices

Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
It's a regular issue of mine, particularly with complex animations. Symbols disappear
- is it something to do with overflow?
- responsive scaling?
I have no idea.

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
     a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

How to customize 'Edit Mode' screen buttons

Does anyone know how to customize the buttons on the screen in 'Edit Mode' of Java portlets?
I would like to change the text of the buttons intead of the standard 'Apply, OK and Cancel'.
Please advise.
Thanks.

You could actually change these Labels on the buttons by modifying the DefaultContainerRenderer for the required PortletDefinition. By default every mode renders data using the DefaultContainerRenderer class, this class is capable of painting the Headers and Footers.
You need to write a new class MyDefaultContainerRenderer extending from DefaultContainerRenderer and override the method renderDesignFormBodyBegin(..).
You should be very careful in overriding this method as not to effect the base fucntionality. Also these Labels are actually NLS compliant so you also need to make sure to be NLS compliant for the new labels.
Finally, you need to specify the PortletDefinition to make use of new MyDefaultContainerRenderer excluding the default one by adding the following tag under portlet definition tag:
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>1</id>
<name>portletName</name>
<title>portlet Title</title>
...... <b><containerRenderer>your.company.package.MyDefaultContainerRenderer</containerRenderer></b>
<render class=".......>
</portlet>

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Unable to open a view in edit mode

Hi All,
I have a Notes assignment block in the Account Overview page. It contains a text area and an EDIT button to modify the notes. Corresponding view and context node for this block are BP_DATA/NOTES and NOTES respectively. Notes context node is bound to Text context node of the component controller.
The issue is, when agent confirms an account, goes to Overview page and clicks on EDIT button of the Notes block, then, if the block already has some text, then it turns in to EDIT mode. But if Notes section is empty initially, then, on click of EDIT button will not make the view editable.
During debugging, I can see that if notes section is already filled with some text, then there is an entity in the collection wrapper of the NOTES context node(also in the component controller collection wrapper). But if notes section is initially empty, then collection wrapper is empty(both view and component controller context nodes).
My requirement is to make the notes section editable even if there is no text present in it initially. It will be very helpful if someone could give me suggestions on this issue.
Thanks and Regards,
Naren

Hi Nitish,
Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
IF ob_entity IS BOUND.
Sets the view in EDIT mode
Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
Regards,
Naren

ALV: columns in read-only mode look like editable columns in edit mode

Hi,
My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
The evident solution was to use
if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
Of course, he would realize that they are not when he tries to edit them, but this is irritating.
See following link with screenshots (only active for 3 weeks from now on):
[Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
I have looked
through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
through the notes in BC-WD-CMP-ALV
but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
Can you please help me?
Thanks in advance,
Erlend

Hi,
In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
Do you want to show it is Grey mode with Non-editable feature. Is that so.
How many columns are there which has Input fields.
Get the column references.
Now, based on the mode of display create the object as Input or Textview field.
For that column -
If mode eq 'D'.
Create an object for Textview(cl_salv_wd_uie_text_view)
else.
Create an Object for Inputfield(cl_salv_wd_uie_input_field)
endif.
The Append row is a standard button or custom one on ALV toolbar.
Do you want to hide the toolbar or just disable these buttons.
If you want to hide the toolbar then refer my wiki -
http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
Regards,
Lekha.
Edited by: Lekha on Sep 30, 2009 8:06 PM

Button Symbol Editting Mode

Similar Messages

Maybe you are looking for