Buttons (boxes) have squared corners in Design Mode, and after quick preview and export to BC test pages, they are rounded? Need quick fix.

Please if anyone can give us some help fixing this bug, tried going into every single state of them individually. We have no other portions of the site with round corners so these are sticking out like sore thumbs. Perhaps it could be other live areas on the site in Tools such as TOOL TIPS which we have changed a bit from normal usage to suit our needs. Please let us know what other bit of information you may need form us, We may have trouble loading full pages, but can load elements.

A link or screenshots would help.
Make sure you have your border radius set to '0' for those elements.

Similar Messages

  • Huge discrepancy between design mode and exported html.

    I added some html from videojs.com to my adobe muse website. As long as I put this video to the left of the website there is no problem, but when I put it more to the right the footer moves along with it. This ONLY happens when I export the page, this does not happen in DESIGN mode in muse itself. Can anybody please help me with this problem?

    Hi Parikshit,
    The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
    As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
    Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
    Does that clarify?
    Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
    Thank you so much for responding!
    - Carly

  • HT4759 help I have deleted all my phone numbers and contacts from my I phone they are stored in the icloud but I do not know how to reload them into my phone

    I need help restoring my contact and phone number nformation backto my phone from the I cloud how do I do that

    Welcome to the Apple Community Mom Mom barb.
    if you are sure your contacts are still available at iCloud.com, then you've probably turned off contact syncing on the phone.
    Go to settings > iCloud and turn contacts on.

  • Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button   power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

    Hi All,
    I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button +  power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
    my os version: 4.2
    Firmware: 02.10.04

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Why was yesterday the typefont Lato displaying good in design mode and today looks like Arial?

    why was yesterday the typefont Lato displaying good in design mode and today looks like Arial? In preview mode its looking good

    I'm having exactly the same problem as Kitcarhans just as of now, with the same font (Lato).
    I tried to follow Abhishek's recommended steps, but they are unclear to me, and in any case, didn't have any effect.
        "2. Rename the folders named tk1 and tk2 in the following locations"
    Not sure what this step is instructing me to do; rename them to what new name? Any? The same?
        "3. Launch Muse and add the font again"
    The font was never removed… was it supposed to have been? Well, in any case, I tried removing and then re-adding, but no effect there either…
    Could you clarify these instructions for me, or if they don't apply to the current problem, advise? The two websites I'm working on now both use Lato, so I can't do much of anything until I solve this problem…
    Thanks.

  • TS1372 I have iPod Classic in Disk Mode and when i connect it to my apple computer it does not appear in iTunes and the screen displays a message saying "Do not disconnect" with a circle with a line through it, flashing. What do I do now?

    I have iPod Classic in Disk Mode and what do I do next cause it's not showing up in iTunes?

    Does the iPod appear on your desktop as an external hard drive?  Has the iPod ever successfully connected before?  Disconnect your iPod and reset it using the Select (Center) and Menu button combo.  Then reboot your Mac, open iTunes, and reconnect your iPod to a high powered USB 2.0 port and see if it's recognized.
    Have you worked through all the troubleshooting here?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files

    I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files.
    I just downloaded the plug in for CS5.5 and it does not work. I put the Camera Raw.8bi file in the correct location as specifiec in the "read me" file.
    Can someone guide me on how to do this, adn make it work?
    Thank you.
    Jay

    so far no luck.
    I ran DNG program for Windows (I have Win 8) and ran the menu to convert
    the files on the same memory card from the camera.   Of 135 files, the
    status column for the first 68 files said "converted," but the for all the
    rest, it says "There was an error writing the file."
    Of the files that "converted," they do not open, and I get the same error
    message as before: "Could not complete your request because it is not the
    right kind of document."
    So, what a mess.
    I get conflicting indications of the version of Photoshop I have. When i
    click "About Photoshop in the Help menu, it says CS5 Extended.    The Error
    message for the dng files says CS5.1 Extended.  Does it make a difference?
    I've been at this three hours now.  It's a pain.   For many years I had no
    problem with NEF files, as I had installed the plug-in as required. This
    time it is not working. So I am not new to this.
    Jay

  • I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support

    I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support

    What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Then place the iPod in Recovery mode and restore using the instructions in the link.

  • HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

    Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
    <Edited by Host>

    What other solutions have you tried?
    This may help you:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear

    My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???

    Do a reset
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them.  I can not click on those songs and when I eject the phone they are not on the phone.

    I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them.  I can not click on those songs, delete or anything and when I eject the phone they are not on the phone.  I tried to re-add the songs and it says it can't add songs because they've already been added.  So HOW can I get the songs to actually ADD to my phone to where I can listen to them?  It's like they're stuck in Sync limbo or something!  Any help would be greatly appreciated.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:
    1 
    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2 
    empty the trash:  Finder > Empty Trash
    3 
    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5 
    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6 
    when complete, restart the Mac normally, Apple menu > Restart
    7 
    install Keynote from the Mac App Store
    let us know if this helped

  • IOS5.0.1 constant error "iPhone can not make or receive calls.  Restore from iTunes":  I get this message and the phone will no longer work (happend once while on airplain mode and now once while in wifi only area, out of cell range).  help!

    All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4.  Newest OS.  Never happened with old OS! Cycling phone on/off does not help.  Ignoring message causes phone to cycle off then on.  After first time this happened, I restored.  Six days later...same problem!  Clearly a new fix is necessary.  Suggestions? 

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

  • I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

    I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

    Static_Unit
    I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
    Don't Have Serial Number for Premiere, Only Photoshop?
    Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
    In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
    I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
    The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
    Thanks.
    ATR

Maybe you are looking for