Buttons can only be pressed below the text and highlight is never visible

So I'm running Photoshop 14.2.1 and Encore CS6 and no matter what I do whether it's dragging my buttons in from the Library or creating my own buttons in photoshop ever button in preview mode is only clickable when th curser is below it and not actually on the text itself and the highlight is never visible.
I'm not sure what I can add past that, my resolution of my Encore project is 1920x1080, my image size and canvas size in photoshop are the same. I have a presentation tomorrow and I need to be able to present my videos properly!!
Thank you very much in advance for ANY help I REALLY appreciate it!

I found out what it was, I didn't keep a proper aspect ratio in photoshop so when I previewed it in Encore everthing but the text moved down. I believe the bad aspect ratio was 1.09 then I switched it to 0.91 and then all the buttons were where they were supposed to be.

Similar Messages

  • When taking a picture with home button and sleep button can you get rid of the tool and task bar??

    When taking a picture with home and sleep button can you get rid of the tool and task bar?? (the search bars)

    No, but you can use any picture editing tool to crop out the bars.  (Many are free in the App Store.)  Me personally, I use PhotoPad, which I use to crop as well as rotate the screen shot.  Takes less than a minute to do both with PhotoPad.

  • When I use the 'reply' tab in Hotmail I can only see half of the screen and am unable to scroll down to view the email I am responding to. How do I fix this?

    I use Hotmail and when I hit 'reply' I can only see half of the page. I cannot tab down to read the email I am responding to and if I type too much the text disappears into the hidden section of the page. This does not happen in Google Chrome when I checked it so it is a Firefox problem.
    How do I fix this?

    OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

  • I can't seem to locate the text and buttons on a flash template I bought

    Hi Everyone,
    I have been working with this flash template I purchased online and can't seem to be able to change the text that is displayed on it's buttons except for the first one. There are four buttons to the side but I can only change the first button's contents as I see them in the "Library". I am new to Flash and learning. Please guide me as to where I can find the other components.
    I can only see and change "WorldWide" and "Call Anytime Anywehre" button.
    Flash source file posted here:
    https://docs.google.com/leaf?id=0B8tFparkP0rKMzliNTcxZDktYmQ3My00ZjJiLWFhMDQtNTEzNWExMWZlN Dgx&hl=en&authkey=CKrQwcwF
    I would also like to add a link to each button and I can't seem to locate the URL Link button. I am using Adobe Flash CS5.
    Much appreciated.    

    What I described is what your file involves.  In your library there is a "text" folder .  In that folder are movieclips named txt_1, and txt_2 which hold the text used in your buttons.  If you open those movieclips for editing you will see each has four frames with different text in each frame.  That is where you need to change your text for the buttons.
    If you look at the actionscript in the top layer of those movieclips, you will see how it uses a value assigned to the button/mc to determine which frame it displays....
    gotoAndStop(_parent._parent.num);
    And if you look at the actionscript applied to the button on the main timeline (select the button with the Actions window open), you will see how that num value gets assigned to each instance...
    onClipEvent (load) {
    num = 1;
    this.hitArea = this.area;

  • How can I get rid of the text and only have icons in the bookmarkfield?

    Earlier the bookmarkfied only showed icons but after the upgrade they show icons and text. How can I get back to only icons so I can have the good old overwiw back?

    umparrothead wrote:
    Test this by going to that folder with both in it and click View/Show View Options. In there, de-check "Show icon preview", and you should see the bordered icons go to default file type icons and the unframed ones remain the same. I honestly don't know how to re-embed the image in the icon data, as it does not play well with the typical paste in on Get Info. Hope this gets a solution rolling, because it's something that's bothered me as well.
    Thanks umparrothead. Yeah, I see what you're saying. The copy and paste into the "get info," is buggy, but it does actually work. I have noticed this when trying to change the icon on an .avi file. The copy paste in "get info," initially shows the paste, but it's not reflected immediately in the files icon in the finder window. I have gotten it to show up as the files icon by moving the file to another folder, (in list view), and then... opening then and closing the folder.
    See here the border on the one file is gone!!
    This opening and closing does not work in the folder the file is in. It only works after moving it to another folder and then opening and closing?!? I think it has something to do with quickview trying to over-ride our choice of icon for it's own choice, whether it be a poster frame on a movie file, or in this case it's own "bordered" view of the photo inside. I imagine it might also show up after a restart, but that is surely far more extreme than the dreaded move file/open folder/close folder/open folder/move file back, trick. uuugghhh...
    This copy paste thing is no solution to be sure. But it does work. I just wish there were some kind of script so I can run it on hundreds of photos at a time...
    Any one else out there with any ideas?!?

  • I have an old and new mac and used transfer manager to put the old mac on the new so that i have both users on one computer but now I can only log in as the new and as guest so cant access my old computer docs on this newer mac.  Help!

    Hello I have just sold my old macbook and so transfered all my data to my newer macbook using transfer manager.  This allowed my to login on the newer computer under either the old or new username so I could access both computers' data on my newer computer.  Last night that worked but today I can only access my newer user and a guest user.  Where did my old user name and all the data go after the transfer?  Help please! I have to give the buyer the old computer today!
    Aminah

    I am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
    If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
    Best of luck.

  • How can we have a column having text and radio button in the same line?

    Hi,
    I have a column which needs to have data with a radio button. Was able to achieve this by using <trh:tableLayout>. But when i select the radio button it shifts to the next line. Want to stop this behavior of radio button of shifting to the next line. This column also includes a hyperlink.So the text and hyperlink are made visible invisible based on radio button action.
    Adding one more doubt. Can a particular columns horizontalgrid can be made invisible?
    Any help would be appreciated.
    sample code:
    <trh:cellFormat id="cf8" halign="start">
    <af:activeOutputText value="#{row.Actions}" id="aot2"/>
    <af:goLink text="#{row.Actions}" id="gl1"
    clientComponent="true" visible="false"
    targetFrame="_blank" destination="http:// + #{row.BUTTON_URL}">
    </af:goLink>
    <af:selectBooleanRadio text="" id="sbr1">
    <af:clientListener method="selectCheckBox" type="click"/>
    </af:selectBooleanRadio>
    </trh:cellFormat>
    Thanks,
    Nita

    Remove the <trh:> components. Put the other components as direct children of the PanelGroupLayout:
    <af:column id="c2" headerText="Actions">
      <af:panelGroupLayout id="pgl6" layout="horizontal">
        <af:activeOutputText value="#{row.Actions}" id="aot2"/>
        <af:goLink text="#{row.Actions}" id="gl1"
                   clientComponent="true" visible="false"
                   targetFrame="_blank" destination="http:// + #{row.BUTTON_URL}">
        </af:goLink>
        <af:selectBooleanRadio text="" id="sbr1">
          <af:clientListener method="selectCheckBox" type="click"/>
        </af:selectBooleanRadio>
      </af:panelGroupLayout>
    </af:column>If you need to add some horizontan space between the components, you can put <af:spacer>(s) between the components.
    Dimitar

  • HT4059 is there an ibook app for the mac?  I can only find it for the iPhone or the ipad...  I like to read on my computer so what gives?

    I am looking for an ibook app form my MAC  and can only find it for the iphone and the ipad.  I like reading on my computer.... so what gives?  I enjoy using my iphone but it becomes tedious and I dont need an ipad.

    In OS X Mavericks, to be released this Fall, there is a built-in iBooks app.
    http://apple.com/osx/preview#ibooks

  • HT201272 i bought a song on my iphone to be used as a ringtone.  I now can only find it in my history and I can play it but cannot do anything else

    I bought a ringtone on my iphone and i cant get use it.  I can only find it in the history and can play it but that's all. how do i get it inot my ringtones?

    Unlike apps, music and media purchased from iTunes can't be re-downloaded without paying again.  If the song is already in your iTunes library on your computer, you'll have to wait to sync.  However, if you just downloaded it and never synced to your computer, it's gone...
    You can contact iTunes support and plead your case, telling them what happened.  They might be merciful.
    Message was edited by: modular747

  • Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

    Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

    Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
    Then, wake the Mac the way you normally wake it.
    Then, find the Console app - it is in your Utilities folder and looks like this
    You can find it by selecting Utilities from the Finder's Go menu.
    Open Console.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
    That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
    Make note of that exact time in hours, minutes, and seconds.
    Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
    All previously displayed log entries will reappear.
    Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
    One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
    Copy and paste those log entries in a reply.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • Is there a way of quitting an app only by pressing on the red button?

    Hello.
    I'm a new Mac user (my MacBook Air bought on April, 17th).
    I was wondering, is there a way of quitting an app by pressing on the red button only, without pressing on the app name on the menu bar and and then on "Quit X"?
    If it's possible, I will be glad to here the way.
    Idanref.

    No.  The red x closes the window but not the application.  An exception is when an app can only have 1 window open. (Like system preferences).   A quick way to close the app is to press CMD Q  on the keyboard.
    Regards,
    Captfred

  • TS4009 How do you downgrade to the free option or get refund? After selecting free the done button can not be pressed.

    How do you downgrade to the free option or get refund? After selecting free the done button can not be pressed.

    Refund:
    If in the US, follow the link below (you must request a refund within 15 days) -
    https://discussions.apple.com/message/16968425#16968425
    it gives the USA phone number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page.
    Keeping current plan, but downgrading when it ends:
    Settings>icloud>Storage & Backup>Change Storage Plan.  Look at downgrade options.  There you can choose the plan you want when the current one ends.

  • All of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

    all of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

    Close out of the camera app, double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Then check your camera roll again.

  • How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    You can prevent it from being printed by applying a security policy to it
    in Acrobat. The rest can't be prevented, unless you spend  a LOT of money
    on DRM protection.

  • HT204266 Somehow I tapped the wrong button and ended up in the Spanish App Store. I can only purchase apps in the American App Store. How do I get back to the American App Store? Thanks in advance. Btw, I use an iPad 3.

    Somehow I tapped the wrong button and ended up in the Spanish App Store. I got a message saying I can only purchase apps in the American App Store. How do I get back to the American App Store? Thanks in advance. Btw, I use an iPad 3.

    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

Maybe you are looking for

  • FCC in Sender Adapter

    Hi Experts, My Input file contains following structure: 101 102 103 104 Now I want to generate following source XML file using FCC in sender file adapter <?xml version="1.0" encoding="utf-8" ?> <ns:MT_Employee xmlns:ns="http://Test_Employee"> <Employ

  • InDesign CS4 in Snow Leopard - final

    Hi! I have searched the issues with Snow Leopard on this forum and now it is not clear for me.. Does ID CS4 work well on 10.6?? Any issue? I plan to clean install 10.6.3. Thanks!

  • B2B attachment query

    Hi all, Does oracle b2b supports 'application/vnd.ms-excel' type of files to be send as an attachment to end TP? We are using SOA 11.1.1.3 version.

  • I am using oracle application server

    i have decoompressed the oc4j.jar file its saying following errors........ D:\>cd oracle D:\Oracle>cd j2ee D:\Oracle\j2ee>cd home D:\Oracle\j2ee\home>java -jar oc4j.jar 06/07/28 17:28:23 WARNING: EJBContainer.postInit Error generating wrappers for f

  • Snow Leopard and Help menus (particularly Logic Pro)

    Not sure if this is snow leopard or Logic Pro issue. Logic 9 using snow leopard, when I go to the help menu I get -" The Help Library requires JavaScript. If JavaScript is not enabled, you will not be able to view all the content." However, the help