Buttons do not function after Flash Movie

I have a page with a number of buttons and a couple of flash
"list" components. One of these lists, gives the user an option to
select one of two modules and then navigates to a marker where a
flash movie plays. When the user exits the flash movie. This is
done via and exit button in the flash movie itself they returnt to
the page where they started. After navigating to that page
following the flash movie many but not all of the buttons are no
longer functional, e.g they do not receive mouseEnters etc.

Are the buttons in question Director buttons or Flash
buttons? In either case, is the code for these buttons in a
behavior that is attached to each button? Is there any part of this
code that disables the button?

Similar Messages

Password Remember Button does not function; Can't input 3rd Party Passwords for Social Networks/Emails.

My "Remember" button doesn't work. Simple as that. The "Not Now"
Button still works, and closes the pop-bar. Remember doesn't do anything.
[Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]
Occurs when trying to input 3rd Party extension passwords.
I have no master password set, I have also read the "Password not remembered topic", and it didn't help.
Error Console yields this:
"'''Warning: The 'charCode' property of a keyup event should not be used. The value is meaningless.
Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=Password+Remeber+Button+does+not+function%3B+Can%27t+input+3rd+Party+Passwords+for+Social+Networks%2FEmails.&showform=1#question-form
Line: 0'''"

Okay, I have started Firefox in Safe Mode, and the Remember button still didn't work. After checking the error console, It had the following message again:
"Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]"
After I Evaluated it (In the error console) it gave me a slightly different version:
"Error: missing ; before statement
Source File: javascript:%20Error:%20uncaught%20exception:%20[Exception...%20"'User%20canceled%20master%20password%20entry,%20login%20not%20added.'%20when%20calling%20method:%20[nsILoginManagerStorage::addLogin]"%20%20nsresult:%20"0x8057001e%20(NS_ERROR_XPC_JS_THREW_STRING)"%20%20location:%20"JS%20frame%20::%20file:///C:/Program%2520Files/Mozilla%2520Firefox/components/nsLoginManager.js%20::%20anonymous%20::%20line%20445"%20%20data:%20no]
Line: 1, Column: 8
Source Code:
Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%2"
I read the Troubleshooting extensions & Themes, but It didn't help.
When I tried to read "http://kb.mozillazine.org/Password_Manager" I get a page that says:
"ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://kb.mozillazine.org/Password_Manager
The following error was encountered:
* Connection Failed
The system returned:
(110) Connection timed out
The remote host or network may be down. Please try the request again.
Your cache administrator is root. "
Also, this error occurs in ALL 3rd Party extensions. It can't log me into E-Mail accounts, Facebook, Twitter, anything. The error message has a window title of [JAVASCRIPT APPLICATION] if that says anything.

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

I need to hard reset a Palm TX but the Power button does not function.

I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TX

Hi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

Buttons do not function :smileycry:

While calling the buttons do not function .
What can I do to solve this problem?
My phone is an Xperia Z1.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Which buttons are you referring to?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Radio Fm in not functioning after upgarding firm w...

Hi,
radio Fm in not functioning after upgarding firm ware 410.21.010
please help to solve it

I am not aware of any "on-device" or native OS FM radio functions. Perhaps it has yet to be implemented, or awaiting a third party to develop an app to use it?
I'd love to have it functional also!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Home button does not function . this happened several times before but now its completely stalled . Kindly advice please

My Home button does not function . this happened several times before but now its completely stalled . Kindly advice please

I would take it into apple and see if they can fix it or replace your phone.

TS3274 In my iPad's Photo folder, after I select edit, and apply check marks to specific photos, the red 'Delete' button does not function. How do I correct this issues?

To anyone familiar with iPad 2s,
After I select the Sunflower Photo icon and touch 'Edit', apply check marks to specific photos I want deleted, the red 'Delete button doesn't function. How do I correct this?
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

The new mail blue button is not functioning properly

The blue button next to new mail no longer goes away when the mail is opened. If I shut down and reopen it still shows as new mail. If I go to a different function on the iPad and come back the blue button finally disappears.
This started happening the next day after I had problems deleting a single email that refused to delete, even through edit/delete. I finally tried emptying my trash, which for some reason took the stubborn email with it.
Is there a way to fix the blue button problem and are the problems I'm experiencing a sign of something going wrong with my iPad?

No promises but a system Reset cures many ills and takes but a minute to perform:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A Reset does NOT delete apps, photos, movies, music or any other data. A Reset does NOT delete any settings for email, network access, etc.
Also, you might wish to download the 4.2 User Guide. Pay special attention to page 170.
http://support.apple.com/manuals/#ipad

BUTTONS DO NOT FUNCTION THE WAY I EXPECT...

PLS HELP ME AGAIN....
button 6 and 7 do not function if i am on page2-6(which is in frame3-7), but if i am on page 1, which is in frame 1, the said buttons do function...
the code is on frame 2,,,,...:
stop();
button6.addEventListener(MouseEvent.CLICK, button6_clicked);
function button6_clicked(e:MouseEvent):void{
    gotoAndStop("index");
button7.addEventListener(MouseEvent.CLICK, button7_clicked);
function button7_clicked(e:MouseEvent):void{
    gotoAndStop("index");
there is another code in frame 3:
stop();
if(buttonyves!=null)
buttonyves.addEventListener(MouseEvent.CLICK, buttonyves_clicked);
function buttonyves_clicked(e:MouseEvent):void{
    gotoAndStop("yvespage");

put each button in its own layer. make sure there are no keyframes in the button layers after frame 1 and make sure the buttons have correct instance names in frame 1. retest.
if you need to keyframes for either button, add them after doing the above.

"Finder" does not function after installing Leopard on Mac G5

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

Movie Not Loaded. (Flash Movie)

when i visit a particular site to watch flash movie, i get a message saying : "Movie Not Loaded" But when i check the same site on IE or Google Chrome, the movie loads.
This issue started after i updated to the latest Firefox 4.0.1. I had also updated the flash plugins but still the same problem.

I had the same problem. I tried all the solutions above from cor-el without any luck.
But after clearing offline storage, youtube started working again.
Tool -> Options -> Advanced -> Network -> Clean Now (under Offline Storage)

Left mouse button does not work after last upgrade on one computer.

Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Buttons do not function after Flash Movie

Similar Messages

Maybe you are looking for