Buttons do not respond on every page of a multi-page form
Hello and thank you for your assistance with this rather vexing problem. I am creating a form with multiple pages in Adobe LiveCycle Designer 8.0 and on each of those pages are various buttons, and each button opens up a different subform (click event makes subform visible). The problem I am encountering is when I "Preview PDF" the form, or open the form in Acrobat the buttons will only work on the page I click on first. For example, if I click on a button on page one (untitled subform)(page1), all the buttons on page one work fine, but the buttons on pages 2, 3 and 4 will not work. If I close the form and reopen it and start by clicking the buttons on page 3 (untitled subform)(page 3) all of the buttons on page 3 work fine, but pages 1, 2 and 4 will not work. No matter what page I start with to test the buttons, only the buttons on that page will work. I have tried using check boxes instead of buttons and the same thing happens.
I cannot upload the actual form I am working on because it contains proprietary information, however I have created a quick sample form that exhibits the same problem as an example. If anyone could help it would be greatly appreciated. Please let me know if my explanation does not make sense or if I can provide further information. Thanks again for your help. :-)
It is hard to explain but following change made trick.
SecondPageSample.presence = "hidden"
xfa.layout.relayout()
Good Luck,
Similar Messages
-
Iphone 4 home button does not respond, resetting fails to resolve issue
the home button does not respond. i tried putting phone to sleep and waking up with home button (which worked, but then the home button does not return the screen to home page), a hard reboot with the home and power buttons, and finally a reset to factory settings and then synching again to my computer. the problem persists.
Bring it in for replacement.
-
FW "not responding" after every command
I'm renaming and relinking a series of button instances from the document library. I change the button name, "not responding" appears at the top of the screen. After a few seconds, I add the link in the properties panel, "not responding." After a few more seconds, I indicate target in the properties panel, "not responding." I can only enter one command at a time then wait for FW to go from not responding to accepting the command.
Also, when I save, FW shows "not responding" at the top of the screen for a few seconds before accepting the save.
Why is it doing this?
I'm in FW CS5, Windows 7. I have 8g of RAM.Okay, here are two shots of my Task Manager when FW was "not responding." This happened in both cases when I hit ctrl-F12 to preview all pages. I was not saving, just previewing. The not-responding state lasted about 10 seconds.
-
Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes.
MAil often doesn’t fully quit although it appears closed in dock (I have to force quit)
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep. The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems.Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep. The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems. -
I attempted to update to latest version of IOS. Now all I get on the display is a graphic of the power cord with an arrow pointing to an iTunes icon. Ipad does not seem to power down or power up correctly. Home button is not responding.
I am new to this, could you provide me with a little more detail on how to do this? Thanks so much!
-
Button does not respond (with attachment)
Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi 178 KBaltenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave. -
Links or buttons do not respond in Firefox but do respond in Internet Explorer
Sometimes and increasingly more often, links or buttons do not respond in Firefox, no new tab opens just nothing happens. But in Internet Explorer, the links or buttons respond normally and everything runs smoothly.
What is the cause then ?No answer yet ????
-
My iPod touch 4th generation's on/off button is not responding most of the time. My home button will work 100% of the time. What should I do? PLEASE HELP!
Restore your iPod touch in iTunes.
-
Unable to import or clear history because buttons do not respond and are not active
When I try to clear history under Tools or import under File, the buttons do not responds. Other buttons work well and are somewhat highlighted, but these two do not respond.
Make sure that you not run Firefox in permanent Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode" -
I've had my 5th gen iPod for a loong time and I've had the occasional issue, but nothing that a reset wouldn't fix. I went to go use it today and the buttons will not respond. No lighting up when I touch the wheel, no play, won't even let me reset it. I've plugged it into the charger, hooked it to the computer and restored it. Nada. Zip. Zilch.
Any suggestions or links to other threads with fixes?ideas?
-
IPhone 5 just bought ask for restoration once and again!!! Buttons do not respond either
The power button do not respond, I have to turn it on connecting the Lightning cable
The home button does not respond either, I have to use it with the remote of the EarPods and Siri, as without the Home button I can not activate the screen
It ask me for restoration once and again, but I restore it using iTunes and as restoration end it ask me for restoration again :-S
Any help??Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
HT201406 i phone 4 various buttons do not respond & connot access contacts list
i phone 4 various buttons do not respond & cannot access contact list l
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Options OK button does not respond
Firefox 5. Tools/Options window OK button does not respond. (I changed from FF4 for same reason, among others!).
To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
'''DO NOT click "Solved It" next to this reply -
New mail button does not respond so can't write mail. help please?
New mail button does not respond so can't write mail. help please?
I am no expert, but open your mail, go to the top of your apple bar click the apple sign then force quit mail, restart and it may work.
I had this issue before and it was resolved.
Maybe you are looking for
-
I have not upgrade to iOS7. I've deleted an email account (gmail incase it makes a difference). The problem is that the ADDRESS still sometimes used despit the deletion. Now, one of the reasons I deleted it was that this address would "override" th
-
How to change destination drive? From C to D?
How to change destination drive? From C to D? Not enough disk space on drive C Solved! Go to Solution.
-
How do i import only part of a song from a CD
I have a CD which has a defect, by error it has two songs in a track and the second must be ignored, i want to import only the first 3:30 minutes
-
How to lock guides in Extension Builder 3?
I added 4 guides in the active document: js code: var leftLine=activeDocument.guides.add (Direction.HORIZONTAL,10); var topLine= activeDocument.guides.add (Direction.VERTICAL,10); var rightLine = activeDocument.guides.add (Direction.HORIZONTAL,(activ
-
Hi i have created a RFC and thru that i am submitting a report and calling that RFC in my EP. i make use of the FM "WWW_HTML_TO_LISTOBJECT" so that data mirror image of my report is also displayed in my portal. But the problem is i can't control it,