Buttons do not work - help
On my test site www.pullman.co.nz/dda/test/index I have a
flash site with a menu top left. If i press the same button twice
in a row it does not go tot he correct fame - i.e. when the images
button is pressed it goes to the frame "images" but when you press
it again when it is already on the "images" frame it goes to the
frame "intro". Any help would be appreciated.
D
Replace the gotoAndPlay("images"); with
gotoAndStop("images");
You are telling it to play, so it will go to the next frame
if it is already sitting on it.
Similar Messages
-
Lower volume button control not working help?
Lower volume button control not working help?
If you only restored from backup, restore to factory defaults/new iPod. If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
-
ok i literally just took my ipod 5 out of the box and the home button is not working help me pleasee!
I would go straight back to store, state the problem and ask for a replacement. Good luck.
-
My "About" button is not working HELP
Hello fellow BB owners ive been tweaking and updating my new 8330 and it seems that now my about button does not respond.All the other menus and places work fine but when i click on the about button it just does not respond.
thanks in advance
Jason
Solved!
Go to Solution.Jason, have you recently upgraded your device to OS 4.5, and in that process did you remove the Voice Activated Dialing features? If you did, that also disables the Options > About screen, and was likely explained in the upgrade process you used.
Workaround: on the homescreen, press and hold ALT while typing E A C E
or
Press ALT + rightSHIFT + H at the same time.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Flash buttons do not work. help please.
iv created a flash gallery using AS3. im having it self study so im not sure how well to manipulate the codes. what i did was place some codes on each frame where my next/previous buttons are place.. it works fine locally, but when i upload it online, it seems not to work and the whole frame runs when it should stop frame by frame. please help. i really don't know what happening coz its working fine locally.
(example code below)
stop();
btn_nstand2.addEventListener(MouseEvent.CLICK, onstudio3);
function onstudio3(event:MouseEvent):void {
gotoAndPlay("studio3");
btn_close1.addEventListener(MouseEvent.CLICK, onstudio4);
function onstudio4(event:MouseEvent):void {
gotoAndPlay("Home");
btn_pstand1.addEventListener(MouseEvent.CLICK, onstudio5);
function onstudio5(event:MouseEvent):void {
gotoAndPlay("studio1");
import fl.transitions.*;
import fl.transitions.easing.*;
TransitionManager.start(studiopic1, {type:Fade, direction:Transition.IN, duration:2, easing:Strong.easeOut});
stop();
Regards,
nikki.no i dont think there is any other file that is calling at. because if i were to click the room and rates link, it goes directly to that rates.swf file. the problem only occur when i begin to view the web gallery, that is if i start clicking on the text buttons iv created which are the "Standard room", "STudio room", "SUite Room" and" apartment" it takes awhile for that gallery to pop up and same goes when i click on the next button, it lags and suddenly would just play continously which it shouldn't be that way and should stop on the called frame. and yes the thing is that i didn't get notified with any errors. well maybe there is something wrong with how i called the frames? by the way, my frames are labeled/named accordingly to be called, the AS3 code iv used to call each of frame is:
stop();
stand_btn.addEventListener(MouseEvent.CLICK, onmain);
function onmain(event:MouseEvent):void {
gotoAndPlay("stand1");
studio_btn.addEventListener(MouseEvent.CLICK, onmain1);
function onmain1(event:MouseEvent):void {
gotoAndPlay("studio1");
suite_btn.addEventListener(MouseEvent.CLICK, onmain2);
function onmain2(event:MouseEvent):void {
gotoAndPlay("suite1");
apart_btn.addEventListener(MouseEvent.CLICK, onmain3);
function onmain3(event:MouseEvent):void {
gotoAndPlay("apart1");
And for my next button, prev buttons, its written like this: (for every frame where there is the next and prev button the code is similar)
stop();
btn_nstand2.addEventListener(MouseEvent.CLICK, onstudio);
function onstudio(event:MouseEvent):void {
gotoAndPlay("studio2");
btn_close1.addEventListener(MouseEvent.CLICK, onstudio1);
function onstudio1(event:MouseEvent):void {
gotoAndPlay("Home");
import fl.transitions.*;
import fl.transitions.easing.*;
TransitionManager.start(studiopic, {type:Fade, direction:Transition.IN, duration:2, easing:Strong.easeOut});
TransitionManager.start(BG1, {type:Fade, direction:Transition.IN, duration:3, easing:Strong.easeOut});
Thanks for the reply again=).
Regards,
Nikki -
Creating Save Button Does Not Work - HELP!
I am trying to create a button that will execute "Save As." I have added a regular button, and at the "click" option I enter: app.executeMenuItem("SaveAs").
The error message I get is "Script failed (language is formcalc; context is xfa[a].form[0].form1[0].#subform[0].Button2[0]) script=app.executeMenuItem("SaveAs")
Error:accessor 'app.executeMenuItem("SaveAs")' is unknown.
What does this mean?? Can anyone please help, I need to get this working asap.
Thanks in advance for help!!You need to change the language of the script from FormCalc to JavaScript in the drop down.
Chris
Adobe Enterprise Developer Support -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
Help button is not working in Infoview
Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.CLOSED
-
My ipod touch has frozen with a white screen. The on/ff and sleep buttons will not work whether pressed for a moment or held for more than 10 seconds as per help pages. When connected to computer it is not recognised and no indication in "devices".It has been working perfectly from Christmas until now. Was watching a TV prog via BBC iplayer when the image and sound froze for about 5 seconds then just white screen. Help
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
My home button is not working in iphone4 what should be do pls help.
My home button is not working in iphone4 what should be do pls help.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If basic troubleshooting fails to resolve the issue, the next step is to take the device to Apple or an Apple Authorized Service Provider for evaluation.
Apple does not repair devices.
iDevices are not user servicable.
Any attempt by a 3rd party to repair the device will void the warranty and all rights to support from Apple and these forums. -
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
i updated firefox to the newest version,now my login and home button does not work,also my refresh button dissapeared. I play alot of games and need those buttons to switch back and forth to other games. THANKS
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
My ipod has just black screen and the home button is not working. what will i do? help please!
my ipod has just black screen and the home button is not working. what will i do? help please!
Try:
- iOS: Not responding or does not turn on
When it says place the iPodin recovery mode use this prgram.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Clearing sequences, running sql script
Hi, I'm using OWB 10.1.0.4.0 and I use a sequence to create a surrogate key in my tables. For the tabels that are deleted during the proces I want these sequences set to 1 again. Is there a possibility to run a sql script in a mapping or in the proce
-
Hello All, In FBCJ when we give the cost center in posting at the time of select print option in that report we does not see the cost center, here cost center column is blank. how to resolve this problem please suggest me. Regards, juhi
-
Use Kerio calendar instead of apples for web based calendar?
I use apples wiki and blog server, but for calendaring I use Kerio's. Just wondered if there is any way to view kerio's calendar as the web based calendar instead of apples?
-
I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.
I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.
-
how can i get rid of an advert mac keeper keeps popping up overtime i click something