Buttons dont work sometimes

I dont know whats wrong with my ipod.. i was listening to music @ night and the song ended so i was holding the menu button to turn on the light and it does the function the middle button does then i tried pressing all the other buttons and they all did the same thing!! all the buttons did the same thing as the middle button.. i had to reset the ipod for it to work... does anyone know whats wrong?

Not a dumb question at all. I didn't know until I looked around here... you need to Initiate an iPod Service Request Form.
You will need a receipt, or other proof of purchase.
You could always take it back to the store you bought it at and explain to them if you don't want to do it over the net.
Hope this helps!
-Travis

Similar Messages

  • Safari's back button dont work sometimes

    Sometimes on my new macbook pro with mountain lion,  in Safari if I want to go back to the previous page the button is gray and non responding, so I have to click the red button and go back ti safari's main page, it happen sometimes not allways and is kind of annoying, can someone tell me what to do?

    This seems to have fixed it for me as described below in another discussion:
    https://discussions.apple.com/message/19227613#19227613
    I went to Safari.
    I opened Preferences.
    I chose "Tabs."
    When offered the option "Open pages in tabs instead of windows," I changed “Automatically” to “Never” as described in the link above.
    Apparently, in the latest version of Safari, if you choose a link that takes you to a new site, you don't get a new Safari window (As you know, when you open a new window, it has no "history," so you automatically know that you can't click the back button). But because this new version of Safari opens the link in the same Safari window that you already have open, you instinctively expect to be able to click "back." But in reality, you're in a window now that has no history and your old Safari window can only be accessed via the History button. (At least that's how I think it's working. I'm no computer whiz.)
    On one of the sites that I went to, it still resisted letting me use the back button exactly the way I used to. However, at least the back button was black instead of gray and when I held down the back button, it gave me the option to return to one of several pages, including the one I had been using previously.
    Switching Automatically to Never seems to have (almost) returned things back to what I was accustomed to. Way, way better than having to resort to the History pulldown menu every time.
    Hope this helps.

  • I have an iphone 5 that i trade with a family member they have coverage on it. now the iphones sleep wake button doesnt work sometimes can apple replace my iphone even if i dont have the box or recipit to the product or can they just repair it?

    i have an iphone 5 that i traded with from a family member. its has coverage but now the sleep/wake button doesnt work sometimes. can apple replace my iphone and give me a new one or is it just something they can repair? i dont have the box or recipit to apple care or the iphone

    Apple can fix it without your receipt or box. They pull the serial number from the device and determine warranty status from that.  Hopefully ApplCare was registered to the product before you lost the receipt though.  If not, you can go back to the point of purchase and obtain your AppleCare receipt and Apple can help attach it to the iPhone.

  • HT1386 home button dont work and it say ipod is disable and connect to itunes?

    I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Hp dv7-1245dx media smart button dont work

    hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web, then the media smart button work bad because y install the dvd play and when I push the buttom sound like i push 2 twise and open the dvd play no the mediasmart menu, then i unistall the dvd play, the media samart work good from the computer icon but to the button dont work, sound like two twise again but dont open nothing, y don't know what to do? I unistall and install again all quik lunch buttons and finger print drivers.help me plase, and another thin. when i format i lost the webcam software i would like someone help me to recober it .  
    thanks
    PD: sorry for the write erros I from argentina I dont speek english very well.
    Message Edited by nachodv7-1245dx on 07-25-2009 10:44 AM

    I have the exact same problem.  I noticed this started after some windows update just prior to upgrading to Windows 7.  And then it got worse after the upgrade. 
    I'm having to go into the task manager and end the smartmenu.exe application just to stop the nagging volume bar across the middle of the screen and just to use the computer, but the Volume still jumps around rapidly.
    Please, HP read this and help.
    Robert S. Rodriguez Jr.
    Robert S. Rodriguez Jr.

  • My iphone 3gs is in ios5 bypass mode and my power button dont work

    my power button dont work how can i fix this the bypass problem ?

    You have a hardware problem. Make an appointment at the genius bar. You can get an out of warranty replacement for $149.

  • Volume button dont work correctly

    Hello,
    I have iPhone 4S on 5.1.1 which I bought in September last year.
    Yesterday when I listen to music with my iPhone I found out the the MINUS volume button dont work correctly.
    It's need to push him hard to decrease the volume. however the PLUS volume button work correctly.
    In addition there is no "click" sound when I press the minus volume button.
    what should I do?
    I live in ISRAEL and there isn't Apple Store here so the only solution for me is to contact the carrier which I bought the iPhone from them but they probably will require payment for the repair.

    sorry but i actually need to use the volume buttons Jujusoccer11
    i've tried resetting already and restoring from back up already but still has the same problem lllaass,
    i'll try restoring to factory defaults now, i hope  it works

  • Qosmio x300 and Win7 - FN buttons dont work

    I reinstalled Windows 7 and now the FN buttons dont work. I have installed the newest version of VAP, the flash card utility is running. So I have no idea.
    Did I forget to install something?
    Or is there a tool who installs all drivers for my Qosmio x300 in one piece?

    Hi
    Normally its enough if you install Value Added Package and Flash Cards Support Utility to use the FN keys. But make sure that both tools are released for Windows 7 and not for old Vista.
    As far as I know if you search for Qosmio X300 on the Toshiba page you will only find VAP for Windows 7. The Flash Cards Support Utility is an older version. I would recommend install a newer version, for example search for Satellite L550. There you can find Flash Cards Support Utility for Windows 7, its version 1.63.0.4

  • SBH20 play/pause, next, previous buttons dont work (Xperia Z3)

    Hi. I have purchased SBH20 but play, pause, next, previous buttons dont work. Volume buttons and play/pause button to accept/refuse calls work. I use it with connection with Xperia Z3. Can u help me what sould I do? Dont wanna withdraw. Thanks.
    :loop; start "" %0; goto loop
    Solved!
    Go to Solution.

    Yes, I did try with Xperia Z3 and it works fine for me. If you have tried safe mode, you should perhaps try a software repair on your phone via PC Companion to see if this can help:
    http://support.sonymobile.com/global-en/tools/pc-companion/
    In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
    Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Volume and the volume buttons dont work unless headphones plugged in. Why?

    my iPad's volume buttons dont work unless i have my headphones plugged in. Also my volume in general doesnt work because it says its still connected to a dock, but i dont own a dock. why doesnt the volume work or the speaker.

    finally i found solution ... it was finger print device and i dont know what is the relation between finger print and sound problem any way the solution is installing the latest fingerprint definition and i found sound working properly !!

  • Sound and brightness buttons dont work anymore

    my sound and brightness buttons dont work any more unless I hold down the function button. This happened after I downloaded the new update I think. Is there any key combination that I could have hit that made this happen?

    Go to System Preferences->KeyBoard & Mouse->KeyBoard and make sure "Use the F1-F12 keys to control software featues" is off. It probably got turned on somehow by the update.

  • Power & volume buttons dont work

    I purchased a used Ipod touch 4th gen for my stepson. I was told the top button doesnt work & I was thinking that was ok so I still took it. Went to set everything up for my stepson last night & the volume buttons dont work either. Can someone please possibly help me!?!? Yes, thats what I get for buying used but was trying to do something good for my kid.

    - Restore from backup. See:                                               
    iOS: How to back up                                                               
    - Restore to factory settings/new iOS device.            
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                     
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price                            

  • The buttons dont work on my ipod!!

    i have a fourth generation ipod and in the last 2 months the buttons and center button dont work.However i can only change the song by shaking the ipod and when i tilt it the cover flow appears as normal but still i cant work the ipod buttons. i have tried updating and restoring the ipod but this has not worked. any suggestions to what i should try?

    Have you tried a hard reset?

  • N91 - buttons dont work!!!

    i bought my n91 a few months back.
    has been working fine until a few days back.
    i dont know what i did but now half the buttons dont work!!
    i can do barely anything ( i cant check messages, contacts etc)
    PLEASE HELP!!!

    27-Oct-200703:19 PM
    trixielicious wrote:
    i have the same problem...
    NONE of my buttons work. i can't do anything!!! only the on/off and lock/unlock buttons work.
    i've tried reprogramming it, turning it on and off... nothing works.
    it really sucks, i've been going to so many nokia care centers and they've been making me go around in circles.
    i'm gonna try again tomorrow. it's really hard because my messages come in but i can't do anything. i can't read any of them! i can't even read my contacts. i can't even back up the info stored inside because it requires me to press buttons!!!
    For your case the nokia care centres are the main help source for you. It's very sad they are circling you around.

  • POWL buttons dont work

    SRM 7.01 and ECC6.0 EhP5
    Hi experts,
    on srm- POWL application many buttons dont work. Im able to see Purchase orders etc., but when i select a PO,  the buttons(e.g.: "edit", "change", "disyplay" ) are clickable, but no action follows. A javascript.void() error is shown in the browser.
    I analysed the buttons and found out that they try to call the powl  (of course). But the http-request receives  an http 403 forbidden response. (wether i call on http or https).
    (URL CALL: mycompany.com:8XXX/sap/bc/webdynpro/sap/powl;sap-ext-sid=E871l_9YTvSOSH9ffhw7bQtEaqrJsDeZHNvkWQbzsLyA?sap-contextid=SID%3aANON%3asrmsystem_00%3alYDfk8xxwglgfx4Zt9wTURpcrEaXLZYQ9SN1JVNb-NEW).
    The SRM-trace doesnt show any usefull hints. (just the failed http call)
    Is there any special Authorization for the POWL application?
    Do you have an idea, how to solve this problem?
    Thanks
    Infos:
    Alle connections between enterprise-portal and srm are set up to https and work (checked). Systemaliases checked.
    User has SAP_ALL on involved systems, portal roles, and pfcg roles.
    RFC connections to erp are checked and work.
    I've tried different browser and popups are allowed

    Hi,
    You have to check the POWL authorisation for the user
    Checking Authorization
    Check the required authorizations using the authorization object CA_POWL in the backend system.
    In transaction SU03 (Maintain Authorizations and Profiles) double-click the object class AAAB (Cross-Application Authorization Objects) and then select the authorization object CA_POWL (Authorizations for Personal Object Worklist).
    The following authorization fields enable you to define complex authorizations in an AND relationship to check whether a user is allowed to perform a certain action:
    ●     POWL_APPID     Application ID
    ●     POWL_CAT          Activity
    ●     POWL_LSEL          Authority state: allowed or disallowed
    ●     POWL_QUERY     Activity
    ●     POWL_RA_AL     Authority state: allowed or disallowed
    ●     POWL_TABLE     Authority state: allowed or disallowed
    For more information, see the system documentation for the authorization object CA_POWL.
    Regards
    G.Ganesh Kumar

Maybe you are looking for

  • Accounting document not complete

    Create a sales order Create a delivery Create a invoice When I look in document flow and I have done all of the above I see accounting document-not cleared can you confirm that this does not show as complete until a cash posting occurs from the custo

  • Registering classes to raise noncustom events in ActionScript 3

    I'm using ActionScript 3 in Flash Professional and I'd like my class to raise an event, not a custom event but an existing one. I've set up my class so that it extends EventDispatcher. In the documentation http://help.adobe.com/en_US/FlashPlatform/re

  • Make an object blink or flash?

    Is there a way to make an object blink or start flashing in Catalyst?

  • Service broker message stuck in Transmission Queue

    Hi, I have a fairly simple Service Broker set up to send messages between 2 DBs within the same instance. Since there is no cross-networking here, I did not set up any routes. So I have a SendQ associated with SendService in DB1 and a ReceiveQ associ

  • How do I keep a desktop shortcut to a server file active???

    I just got my PB and have it connected to the network (XP-based). I can get on our fileserver with no problem. I have the file/folder I need access to listed in my login section under Accounts. Yet, when I close my lid for the night, come in and open