Buttons Missing Of Screen

Hi
I just purchased a MacBook Pro, I use it in conjunction with my photography. When I opened my HDR editing software (Photomatix Pro) and edited a photograph, i could not access some buttons that had vanished off the bottom of the screen.
I also noticed while in Mail composing an email, when I tried to attach a picture that I had selected, the "attach" button had also gone off the bottom of my screen.
I just know this is going to be something simple, but I cant find it!
Can anyone advise please.
Thanks
Gerry..........
Message was edited by: windhoveruk

Hi Mac Medic
Thanks for your reply, I solved the 'missing buttons' issue with my photo editing app (Photomatix Pro) all I needed to do was collapse a section of the editing pane by clicking the 'down' arrow on one of the sections!!..... duhh!
I was used to editing on my imac where I had all the panes open due to the larger screen and had actually never had the need to close them before.
However I still have an issue with 'Mail'. When I am composing an email and I try to attach a picture, the 'cancel' and 'attach' buttons are barely visible at the bottom of my screen, I can still just get them but its a pain!
I have the need to maintain my highest screen settings due to detailed photo editing required.
Any suggestions with Mail.....??
Gerry.......

Similar Messages

  • Lenovo G560 print screen button missing

    Hello,
    The print screen button is missing in my G560 laptop. Is there an alternate way to capture screenshot?
    Please help!
    Thanks,
    Poornima
    Solved!
    Go to Solution.

    Hi Poornima,
    Welcome to Lenovo forums
    As I understand that you are facing issue with laptop physically missing print screen button in your G560 laptop.
    As you are looking for an alternative option, I would suggest you use snipping tool for taking screen shots.
    This snipping tool is available in windows 7, to access snipping tool  go to search and type snipping tool, then the tool appears.
    Hope this helps! 
    Best regards,    
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing Transfer to Central System button in CPPR screen

    Hi
    I am Working on SRM7.0 and ERP ehp4.
    Trying to transfer PR from ERP to SRM Shopping cart using CPPR.
    I created PR in ECC ->now displayed PR in Portal ->select PR and click Start collective processing button-> i could not find Transfer to Central System button in CPPR screen.
    I believe only after clicking this button,i can transfer the PR to SRM shopping cart. Pls confirm.
    Only two things i left to do in CPPR setting is badi and linkage setting, because Rfx is not required now.
    1)BADI setting  ME_REQ_SOURCING_CUST
    Planning to activate only
    Method IF_EX_ME_REQ_SOURCE_CUST~ACTIVE
    parameter cv_ext_sc_ind   = cl_mmpur_constants=>yes. "SC creation in SRM possible
    I am going to leave blank for method.
    method IF_EX_ME_REQ_SOURCE_CUST~CHECK_EXTERNAL_SOURCE because i want manual click to convert Shopping cart.
    2)Activate linkage setting
    Here i am not going to activate RFX.because i am currently testing only PR to Shopping cart.
    BOR Object Type BUS2105 RFXREQUESTED WS53800009  - not going to activate
    BOR Object Type BUS2105 SOURCINGREQUESTED WS53800009 - plan to activate.
    Because of lacking above setting, i am not getting Transfer to central system button? pls confirm.
    Regards
    Ckumar

    Hello,
    Method 1: IF_EX_ME_REQ_SOURCE_CUST~ACTIVE:
    Here, three output parameters need to be set to true. By default, coding from the sample class will be copied. There is no need to modify anything here.
    When the parameter CV_AUT_SOURCING is set to true, external sourcing (e.g. SAP SRM system) is active in SAP ERP system
    When the parameter CV_EXT_RFX_IND is set to true, RFx can be created out of PR directly from SAP ERP system using application CPPR
    When the parameter CV_EXT_SC_IND is set to true, PR in SAP ERP system will be transferred to SAP SRM using application CPPR
    Method 2: IF_EX_ME_REQ_SOURCE_CUST~CHECK_EXTERNAL_SOURCE:
    This method has output parameter CV_EXT_SOURCING. When the output parameter variables are set, the Purchase Request will be transferred to SAP SRM without any manual interaction in Collaborative Processing of Purchase Requisition (CPPR). Hence the code logic here needs to be adopted based on parameters in the Purchase Request (e.g. material group and purchasing group can be used as parameters to determine the Purchase Request to be transferred to SAP SRM).
    A sample code logic for purchasing group u2018E7Uu2019 and material groups QZA04 and QZA05 is given below:
    IF ( is_req_item-ekgrp = 'E7U' AND is_req_item-matkl = 'QZA04' ) OR ( is_req_item-ekgrp = 'E7U' AND is_req_item-matkl = 'QZA05' ). cv_ext_sourcing = cl_mmpur_constants=>yes.
    Activate event type linkages for external sourcing
    Run transaction SWETYPV in SAP ERP system.
    Ensure that the following entries are present:
    BOR Object Type
    BUS2105
    RFXREQUESTED
    WS53800009
       No errors
    BOR Object Type
    BUS2105
    SOURCINGREQUESTED
    WS53800009
       No errors
    If they are not present then copy the entry for event u2018Createdu2019 for object type u2018BUS2105u2019 and Receiver Type u2018WS53800009u2019 and change the event name.
    Note : Workflow event RFXREQUESTED is used to trigger XML message while creating SAP SRM RFx from Collective Processing of Purchase Requirements (CPPR).
    Regards
    Mustameer

  • Why is the 'Next' button in 508 Screen Reader mode not working for RichTree

    Hi ADF Experts,
    My JDeveloper version is 11.1.1.8. The 'Next' button in 508 Screen Reader mode for tables works fine.
    However, it does not work for trees, I can see only the first 23 or so items.
    Any ideas?
    What am I missing here?
    Regards,
    -ab

    There is no official JDeveloper version is 11.1.1.8.0!
    If you use an internal build ou should post to an internal forum.
    If you use an official version please tell us which on.
    Timo

  • OPEN VIEW button missing in BEx report

    Hello!
    When I open BEx report, I can see buttons for managing report. I can see SAVE VIEW, BOOKMARK, VARIABLE SCREEN, Exceptions and Conditions, COMMENTS, EXPORT TO EXCEL, EXPORT TO CSV.
    I have SAP BW 7.0 installation.
    Button OPEN VIEW is missing, although I saw this button in one other 7.0 BW installation. Why is this button missing?
    On WAD reports I can put this button on report.
    Thank you
    Gorazd

    Hello,
    Is this Java Web or Abap Web?
    Due you are on BW 700, I assume you aer using Java.
    First, the Open View button doesn't exist.
    You have to click on New Analysis and select View.
    However, per I can see you don't have New Analysis button.
    Ensure you are using the standard SAP templates.
    Go to RSCUSTV27 and let all fields blank.
    Then, re-active the 0ANALYSIS_PATTERN template.
    This should works...
    Kind regards,
    Edward John

  • Missed call screen doesn't go away

    Hi everyone,
    I need help with this VERY annoying issue, I've had this problem since I had my iphone 5 a couple of years back and now it's still happening with the iphone 6.
    Every time I get a missed call on my iphone the screen freezes and does not allow me to do anything else, I have to restart the phone in order to clear the missed call screen. Is there anyway to deactivate this feature? does anyone know what I'm talking about ?
    Will appreciate your help!
    I've attached a screen shot so you guys have an idea.
    Thanks in advance!

    The proximity sensor controls the screen's "sleeping" while on a call.
    1. Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost
    2: Try a restore:
    (Do you use iTunes or iCloud for backups?)
    If neither of these works the sensor may very well have an issue and I would find someone to take a look at it.

  • Problem with buttons in my screens

    hi
    i have two buttons in my screen say button1 and button2
    by default when i display this screen as per my requirement only button1 should be visible and button2 should be invisible
    button2 should only be visible when i click on my first button i.e. button1.
    where and how to code this
    vamsi

    Hello Sir,
    This is Ravi and Saras this side.
    Remember?
    TCS.....SAP Training.....Lemon Tree...
    Ok.
    As far as ur question is concerned.....
    1. At selection-screen output
         loop at screen.....then make the 2nd button invisible by modifying the screen.
    2. At selection-screen
         Between an if endif condition check whether the 1st button has been clicked.
         If yes then again loop at screen and make the 2nd button visible.
    That will solve ur problem.
    Regards,
    Ravi and Saras

  • Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

    Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
    Similar query has been answered here.
    http://forums.adobe.com/message/4285441

  • I tried to soft reset my ipod touch with the top button and the screen button.  it turned off and went to the blue screen with the apple.  now it won't do anything-it has stayed on that scren for 4 hours now.  does anyone know how i can fix this?

    i tried to soft reset my ipod touch with the top button and the screen button.  it turned off and then went to the blue screen with the apple like it should.  however, it now just stays on that screen.  it has a sort of clock looking thing at the bottom of the apple that does not move either.  it has stayed on this screen for over 4 hours.  i also can not hard reset it in itunes.  i am not really goood at this sort of thing.  does anyone have this problem or a possible solution?  thanks

    See Here for
    Frozen or unresponsive iPod touch
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore...
    Try this First... You will Not Lose Any Data...
    Turn the iPod Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the iPod On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Want to restrict buttons in PV8i screen in Training & Event Management

    Dear All,
    My requirement is to restrict available buttons in PV8I screen except the 'Appraisal' function. The standard buttons given in PV8I screen are like Rebbok event, cancel etc. My client requires that an user can only use this screen to maintain the business event appraisal data. User should not have the authorization for rebook event, cancel or request for booking. So how these buttons can be removed / hide or deactivated, so that the user will not be able to use thesr buttons. Please help.
    Regards,
    Daniel

    Using configuration you can only remove SAP launchpad buttons and toolbars.
    refer
    Transaction iView not to display R/3 header
    http://wiki.sdn.sap.com/wiki/display/HOME/Article%2b-%2bEmploy%2bSAP%2bGUI%2bfor%2bHTML%2binstead%2bof%2ban%2bInternet%2bservice?bc=true
    If you wish to remove or hide some Tcode level buttons that this will be done only using some application/Tcode specific configuration/modification.
    Edited by: Saurabh Agarwal on Mar 1, 2012 9:38 AM

  • Is it possible to add buttons on a screen without drawing in screen painter

    Hi experts and others,
    I want to design a flexible screen structure so I want my buttons which are on a screen appears according to my wish at runtime.
    Is it possible to design a screen like this.
    In addition, I would get my button's name and fcode from table.
    I am open the hear any idea.
    Regards.

    Simple Way to Do this:
    1) Create the relevant Button on the screen.Assign Group name in the screen Properties.
    2) In PBO you can write codes to hide the button according to your requirements.
    Ex:
    PBO.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'AA'.        " Group assigned at Property level
    Screen-Active = 0.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    Regards,
    Gurpreet

  • Error during creation of push button on selection screen

    Hi,
    I wanted to create push buttons on selection screen,
    Code:
    DATA DB1 TYPE VBAP-WERKS.
    DATA DB2 TYPE MARA-MATNR.
    SELECT-OPTIONS : SPLANT FOR DB1,
                                    SCLASS FOR DB2.
    SELECTION-SCREEN:  FUNCTION KEY 1,
                                        FUNCTION KEY 2,
                                        FUNCTION KEY 3.
    INITIALIZATION.
    DATA FUNCTXT TYPE SMP_DYNTXT.
    CLEAR FUNCTXT.
    DATA: FUNCTXT_01 TYPE SSCRFIELDS-FUNCTXT_01.
    FUNCTXT-TEXT = 'DEL'.
    SSCRFIELDS-FUNCTXT_01 = FUNCTXT.
    CLEAR FUNCTXT.
    FUNCTXT-TEXT = 'EDIT'.
    SSCRFIELDS-FUNCTXT_02 = FUNCTXT.
    CLEAR FUNCTXT.
    FUNCTXT-TEXT = 'CRE'.
    SSCRFIELDS-FUNCTXT_03 = FUNCTXT.
    But during activating, I'm getting the error as : Field "SSCRFIELDS-FUNCTXT_01" is unknown. It is neither in one of the specified tables nor defined by "DATA" statement.
    Please suggest solutions to overcome this error.
    Regards
    Darshan MS

    Hi,
    trans. for examples of selection screen : BIBS
    regards
    Fred

  • Error in search help button at selection-screen

    hi all,
    i have a small issue.
    i have created a seach help button in selection screen .
    my code is as bellow.
    TYPES: BEGIN OF ty_ZSD_SNID,
           KUNNR TYPE KUNNR,
           BAREA TYPE WERKS_D,
          END OF ty_ZSD_SNID.
    DATA : it_z TYPE STANDARD TABLE OF ty_ZSD_SNID.
    selection-screen : begin of block b with frame title text-000.
    select-options : skunnr for zsd_snid-kunnr.
    parameters :     pbarea like zsd_snid-barea obligatory.
    selection-screen : end of block b.
    INITIALIZATION.
      SELECT KUNNR BAREA FROM ZSD_SNID INTO TABLE it_z.
      SORT it_z BY BAREA KUNNR.
      DELETE ADJACENT DUPLICATES FROM it_z COMPARING BAREA KUNNR.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR SKUNNR-low.
      IF it_z[] IS NOT INITIAL.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
                 EXPORTING
              DDIC_STRUCTURE         = ' '
                   retfield               = 'KUNNR'  " data base table field name
              PVALKEY                = ' '
                  dynpprog               = sy-repid " program name
                  dynpnr                 = sy-dynnr          "screen name
                  dynprofield            = 'SKUNNR-LOW'  " layot field name
              STEPL                  = 0
              WINDOW_TITLE           =
              VALUE                  = ' '
                  value_org              = 'S'
              MULTIPLE_CHOICE        = ' '
              DISPLAY                = ' '
              CALLBACK_PROGRAM       = ' '
              CALLBACK_FORM          = ' '
              MARK_TAB               =
            IMPORTING
              USER_RESET             =
                 TABLES
                   value_tab              = it_z[]   " internal talble name
              FIELD_TAB              =
              RETURN_TAB             =
              DYNPFLD_MAPPING        =
            EXCEPTIONS
              PARAMETER_ERROR        = 1
              NO_VALUES_FOUND        = 2
              OTHERS                 = 3
        IF sy-subrc  <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.
        MESSAGE E000(zsdsn).
      ENDIF.
    my issue is , its working properly if records are there in my z table.
    if no records are there in the table then if i do comment the last message statement then its working.
    if i do uncomment like the above code, then its dumming.
    what i should i do ??
    kind regards

    closed because of no answer.

  • Creating push button on Selection screen application toolbar

    Hi Friends,
    this is a HR-ABAP report. I have to create a push button on Selection screen. when user clicks on that push button 'MODAL DIALOG BOX' has to be displayed containing some data.
    plz kindly give some sample code to do this.
    Regards,
    Radhika Dasharatha.

    Hi,
    1)Use SELECTION-SCREEN  PUSHBUTTON /10(20) PUSH USER-
      COMMAND 'ABC'. in selection screen.
    2) Give the static name to button in INITIALIZATION event like PUSH = 'PRESS'.
    3) At selection screen.
      if sy-ucomm eq 'ABC'.
    call FM HR_BE_GE_MODAL_DIALOG
    endif.
    Thanks
    Sandeep
    Reward if useful

  • My daughter help down the home button and the screen is now glowing, how do i tuen it back to normal?

    help me,daughter held down home button aqnd my screen is glowing, kida, where the back ground was black it is now white.  its kinda like a backlight or something. how do i put it back to normal?

    If the screen colours look like they've turned negative then try triple-clicking the home button - or go into Settings > General > Accessibility and turn White on Black 'off' (and check/change what Triple-Click Home on the same Restrictions screen is set to).

Maybe you are looking for