Buttons set as "free position" change back to default

In iDVD 6, if you move a button to free position and then save it, when you re-open the project the button position changes back to the default position. I am using the iDVD 6 theme "Reflection Black" and positioned the button in the gray pane at the bottom but it moves back up the pane to the default position no matter how I try to save it. Anyone else having this problem?
Thanks
Craig

The first six slideshows behave themselves and stay where I position them in the area designed for the listing. The remaining six are off to the side right across the moving drop zones, which makes them hard to read.
I believe all of the menus are defaulted to handle six buttons, while you can add up to twelve on some, maybe this main menu can only "hold" six... I had four on mine.
How about one button on the main menu that says something like "Slideshows" and when you click on that it takes you to a new menu (the chapter menu) and try to put twelve there.
G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB Mac OS X (10.4.6) 2 SuperDrives (SL 8X & DL 16X)

Similar Messages

Cursor does not change back to default after resize

Hi all,
I have a modal decorated JDialog, in normal situation, i put the cursor on the border, the curosr will change to resize cursor, so i drag it and the dialog is resized, after resized, the cursor should change back to default cursor when i enter the dialog again, but i found that somotimes after several resizes, the cursor fail to change back to default and remain as the resize cursor.

Hi
I think there is nothing so strange to cause the problem so I did not put it before, but if someone can help me I will be thankful.
public class TestFrame extends JPanel
     private static TestFrame testFrame;
     private JFrame frame;
     public static void main(String args[])
          JDialog.setDefaultLookAndFeelDecorated(true);
          testFrame = new TestFrame();
          testFrame.mainImplementation();
     private void mainImplementation()
          JButton jButton = new JButton("Show dialog");
          jButton.addActionListener(new ButtonActionListener());
          add(jButton);
          frame = new JFrame();
          frame.setContentPane(this);
          frame.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
          WindowListener l = new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
          frame.addWindowListener(l);
          frame.setBounds(0, 0, 500, 500);
          frame.setTitle("Test");
          frame.show();
     class ButtonActionListener implements ActionListener
          public void actionPerformed(ActionEvent e)
               MyDialog jDialog = new MyDialog(frame);
               jDialog.setVisible(true);
     class MyDialog extends JDialog
          public MyDialog(Frame owner)
               super(owner);
               setModal(true);
               getRootPane().setWindowDecorationStyle(JRootPane.FRAME);
               JLabel label1 = new JLabel("Label1");
               JTextField textField1 = new JTextField();
               textField1.setEnabled(false);
               textField1.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label2 = new JLabel("Label2");
               JTextField textField2 = new JTextField();
               textField2.setEnabled(false);
               textField2.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label3 = new JLabel("Label3");
               JTextField textField3 = new JTextField();
               textField3.setEnabled(false);
               textField3.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JPanel panel = new JPanel(new GridLayout(3, 2));
               panel.add(label1);
               panel.add(textField1);
               panel.add(label2);
               panel.add(textField2);
               panel.add(label3);
               panel.add(textField3);
               getContentPane().add(panel);
               pack();
}

Change Mailbox Behavior - Can it be changed back to default?

I mistakenly changed the setting and want to change it back to default, i.e. keep sent box on the server rather than on my iPhone. Is it possible? If not, does not mean the messages in my sent box will stay on my server AS WELL AS on my iPhone? Thanks.
I was a blackberry user and find I can not set the mail account as my blackberry. I want my iPhone to just check new emails when I am by my desktop. I do not want it to sync with my mail system which take too much space. Can anybody here help me?

# Click the orange Firefox button or, if the application menu is enabled, click '''Tools''' followed by '''Options'''
# Click on the '''Content''' icon/category
# Next to where it says ''Block popup windows ''click the '''Exceptions''' button
# Select the site for which you wish to revoke the exception then click the '''Remove Site''' button

Environment fonts keep changing back to default

In order for my UIs to look good on all my deployed systems (usually windows xp or 7) I change all the environmental fonts (Tools>Options>Environmental>Fonts) to Tahoma (and, of course, set the init file to use tahoma for all these fonts). Lately I've been noticing that every once in a while I will open LabVIEW and the fonts will be changed back to their defaults. Has anyone else had this issue or does anyone have a good work around? It is frustrating because I usually don't notice this has happened until I've finished aligning multiple elements and then realize I have to change the font and align them again.
Note: I'm developing in LabVIEW 2012 on a Windows 7 pc.

Hey Gollum,
I found what seems to be causing your issue. There is a bug in LabVIEW 2010 and later that causes custom font tokens to be overwritten when any other change occurs in the LabVIEW.ini file. The Corrective Action Request (CAR) ID Number is 256978. The issue was fixed in LabVIEW 2013 (http://www.ni.com/white-paper/14541/en/).
Regards,
Ian K.
Applications Engineer
National Instruments

Quiz fonts type change back to default font type

I changed the font type for the answers to the quiz questions and for some reason the first two of almost ever multiple choice question that I have in 15 separate modules changed back to Myraid Pro from Arial.
I have changed it back to Arial, however, I wonder if I should have changed it all back to Myraid Pro.

Hey Gollum,
I found what seems to be causing your issue. There is a bug in LabVIEW 2010 and later that causes custom font tokens to be overwritten when any other change occurs in the LabVIEW.ini file. The Corrective Action Request (CAR) ID Number is 256978. The issue was fixed in LabVIEW 2013 (http://www.ni.com/white-paper/14541/en/).
Regards,
Ian K.
Applications Engineer
National Instruments

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

Wallpaper keeps changing back to default

I posted this in another forum, by accident.
Here is a video of what's going on: http://www.youtube.com/watch?v=1_iESJDAn6g
I'm usually pretty good with my Mac, but I can't figure this one out, for the life of me.
I use my older model Macbook Pro for a media computer. It's hooked up to a surround receiver, by a DVI>HDMI cable and with the optical audio out on the laptop. The surround receiver then goes to my TV, which I use as a display (I keep the laptop closed).
Recently, I've done two new things to my setup:
1. changed the desktop around with Geektool (it now displays the time, date and a calendar)
2. bought a Logitech Harmony 1100 remote to control my media setup.
For some reason, whenever I change from the Macbook Pro to, say, my Xbox, when I come BACK to the Macbook Pro, the wallpaper has changed from what I've chosen to the default wallpaper (from when you first install OS X). When I restart the computer, everything works properly and the wallpaper is back the way it should be, but until then, no matter how many times I change the wallpaper from the 'default,' it always waits about a second and changes itself back.
To be clear, in the Desktop/Screen Saver settings, everything looks how it should look: the wallpaper that I want to be the wallpaper is still selected as the current wallpaper. When the picture on the actual desktop changes, nothing changes in the Desktop/Screen Saver Settings, which is what is so confusing to me. I can pick a wallpaper and have it show up for about a second, at which point the default wallpaper pops up on the desktop (meanwhile, the wallpaper I've selected is still the wallpaper selected in Desktop settings).
It's truly bizarre. I've tried using InsomniaX, to see if maybe there was something weird when the computer was going to sleep (when I change inputs on the surround receiver), but the problem still persists.
I've turned off Geektool and restarted Finder and nothing's happened and I can't imagine that the Harmony is sending a weird code that would make my computer's wallpaper change.
I did a PRAM reset and that didn't solve the problem.
Does anyone have any suggestions?

I suspect Geektool is the culprit. Did you have this problem prior to installing it. If not, then I suggest that you contact Geektool's manufacturer to see if they can come up w/some suggestions.
Have you tried any of the following?
Trashing the desktop.plist file & restarting your computer?
Repairing permissions and/or repairing your disk from the install DVD?

Adobe Printer Preferences do not change - Back to default

We have Acrobat 8.1 installed on an XP and 2003 Server station. The printer preferences were changed to print to pdf without prompting for a file name, delete logs, etc. We we open an application like notepad and print to the PDF printer all the printer preferences are applied. However, when an application like MSF (Microsoft Shared Fax) uses the printer to print faxes to pdf, the pdf used the default Adobe printer preferences instead of the preferences set on the PDF Printer. This locks up the computer because the PDF Printer prompts for a file name and location, but the prompt window is suppressed, and therefore the machine locks up with no posibility of removing the print job from the spooler.
How can I force Microsoft Shared Fax to use the preferences set in the PDF Printer, instead of it using the defaul values. Where in the registry is this located?
Thanks
Cath

I will not address the server issue, though you need to have proper license for this use (not the standard out-of-the-box license). As far as the settings, you should set them in the Adobe PDF printer properties. They may fail across a network connection. Network issues have long been problems for some folks using Acrobat.

Custom shortcut changes back to default BUG?

hi,
i created custom shortcuts for Flip Horizontal (⌥⌘H) and Flip Vertical (⌥⌘V).
(⌥⌘V) is used by default by Vanishing Point Filter.
I created also other custom shortcuts using other default assignments.
But only (⌥⌘V) gets back to the default assignment each time i start photoshop.
I need to open the "Keyboard Shortcuts" and just reselect my preset to have it back as i want.
this should be some kind of bug? it is quite annjoyng.
please help1
thanks!

Seems to be working with photoshop cc 2014.2.2 on mac os x 10.10.1, so far.
I'd reset the photoshop preferences and see if that makes any difference.
Press and hold down the Shift+Command+Option keys just after starting the launch of photoshop
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes

Why my costumized settings change back to default, when i close the browser?

I keep trying to customize that the browser open the windows and tabs from the last time and that before downloading something to ask me before and i save all this, but when i close it and open it again, the settings get to the default mode, meaning i get the home page instead of all the tabs i was having, and also the downloads get into the C: Downloads instead asking me where i want to save them. How can i fix this? I have the last version of Firefox (18.0.1).

Have you checked out this article: [[How to fix preferences that won't save]]. Note: I would save the Reset step until after you have tried some of the specific things.
By the way, if you are using any sandboxing or virtual machine software to run Firefox, this may require a different approach.

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

You can drop the resolution a little, but it makes everything blurry.
OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
The UI really needs to be adjustable and it's not.

HT2470 The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything!

The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything! Help!

Select a Finder window, Finder->View->Customize Toolbar…, and add it back.

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

FireFox's buttons on the taskbar often change position

Firefox's buttons on the taskbar often change position. If I click on a button frequently (in order to bring the window forward), the button for that window will start to jump to the end of the other buttons. Since the buttons are no longer in the same order, I end up having to search for the right button constantly. This is a huge annoyance.

I am guessing that there is an auto hide feature turned on for your taskbar:
Try this: "Reset taskbar to normal, open FF maximised then set auto hide."
from: [www.sevenforums.com/browsers-mail/195149-win7s-autohide-taskbar-function-defeated-maximize-firefox.html]

Buttons set as "free position" change back to default

Similar Messages

Maybe you are looking for