Buttons too sensitive

After the latest update, the buttons on the screen of the phone while telephoning are far too sensitive. For instance, it goes to Facetime acccidently by being too near to my cheek/ear. Is there some way to make the buttons less sensitive? Thank you

Hello there Dr. Dave,
It sounds like your proximity sensor is not turning the screen black to prevent buttons from being pressed. I recommend the troubleshooting from the article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Screen won't lock or go black when answering calls
Verify mute or speaker have not been activated, just prior to placing your ear over the receiver.
While on a call hold your hand over the top third of the display, and verify that the screen is locked or goes to sleep.
Try turning iPhone off and then on again.
If the issue persists, I would next close all the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

HT201401 Home button too sensitive

One of our iPhones' home buttons seems sensitive, like it's always being pressed. So the voice control might turn on, music might start playing. If the off button is pressed, sometimes instead of turning off the phone, a picture will be taken.

"was facing the same problem too. Found this post and it did the trick:
http://snapguide.com/guides/calibrate-your-home-button/"

Mighty Mouse's side buttons too sensitive...

Hi there,
Every two seconds, the fonction of the side button gets activated because I press them by mistake... It's been two weeks and I still hit them by mistake.
How do I make the Mighty Mouse's side buttons less sensitive?
Thanks!
Chris.

for me it's actually static that makes the side buttons operate all on their own just if my hand is barely touching. i don't have this problem when i'm on tile flooring with my new iMac, but in my bedroom on carpet, the mouse and computer act weird becasue of dry climate and static. if i keep my hand on the metal base of the imac i have no problems. as soon as i remove my hand, problems. i'm now working on grounding my computer but that hasn't worked yet. i need to be de-static in some way i think.

Mute button too sensitive

The mute button is so sensitive it renders the phone useless. I would like to disable it but am told I cant. I have done a complete reset with Apple tech support more often than you have changed socks. Also, the blue dot that shows your progress on the maps applications works about 1 time in 3. This is my second iPhone 4 the first one had so many problems it was absurd. Is there anyone here that has found a fix for these problems?

gary.conrad wrote:
It is supposed to mute when you touch it with your finger. It is not supposed to mute when a single ear hair touches it. This is an issue that Apple was going to fix but they admit it hasnt been done yet.
welcome to the iPhone 4 Proximity Sensor Issues Club
300+ pages about this starting here:
http://discussions.apple.com/thread.jspa?threadID=2475509
Cliff Notes:
Proximity Sensor doesn't work properly for many people causing uncommanded face-dialling, face-muting, face-facetiming, face-hanging-up etc whilst on calls.
Some unsubstantiated debate as to whether this issue is fixed in iOS 4.1 (release date as yet still unknown)

My iphone shuts off randomly and the button is too sensitive. Like I don't even press the lock button and it shuts off. This happened after the 7.1 update. It's on the iphone 5.

My iphone shuts off randomly and the button is too sensitive. Like I don't even press the lock button and it shuts off. Also when my finger barely rubs over the lock button, it shuts off too. This happened after the 7.1 update. It's on the iphone 5. Someone help me. I just want to fix this. Maybe if it's possible I can disable the lock button.

The lock button does not turn OFF the iPhone. It will give you a screen with the option to turn OFF the iPhone. Possibly the battery is faulty. Make Genius reservation and take iPhone to Apple store for free battery diagnostic testing and evaluation.

My track pad is malfunctioning. it isn't clicking properly - and sometimes doesn't respond. other times it is too sensitive. I don't remember spilling anything on it. What should i do?

my track pad is malfunctioning. it isn't clicking properly - and sometimes doesn't respond. other times it is too sensitive. I don't remember spilling anything on it. What should i do?

1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

Mouse too sensitive or driver problem?

I've noticed that for the past half year, my mouse buttons have been too sensitive. I'll attempt to singleclick, but it will register as a doubleclick.
Does it sound like my mouse is too sensitive (maybe because the contacts are dirty) or is something xorg wrong with the input drivers that would cause this to occur? I do know that there was a problem a while ago with jumpy/jittery mouse control, but that never happened to me.

Hi people. I'have this problem too with my Synaptics Touchpad. I've installed gsynaptics tool (Preferences->Touchpad) and selected "Tapping Time" to the shortest value with no effect apparently, it is still too damn sensitive.
Also, my xorg.conf is completely commented out! So I think everything is HAL-detected. Any ideas ?

Yoga 2 Pro rotation too sensitive & stand mode not working

In tablet mode the Yoga 2 Pro is too sensitive. It seems to rotate for the smallest thing. You have to hold it vertically in order to prevent it from rotating.
In stand mode, the image is always upside down. I cannot get it rotated, even after pressing the rotate lock button several times. It's fairly difficult to get the screen right.
I am a experienced Yoga 13 owner which works perfectly. I am worried about the sensitivity of the Yoga 2 Pro and the fact the image is always upside down in stand mode.
I am on a clean factory install, no modified drivers.

A reinstall didn't work.
So presumably the sensor board is faulty.
Where can I buy the sensor board? (page 64)
http://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_2_pro_hmm.pdf
Or maybe the sensor board is installed upside down if this is possible. Maybe it's flipped vertically. Because the sides are working just fine!

My phone has been asked to be plugged into itunes for the past hour or so, and it has been plugged in the whole time... i have tried holding in both buttons too turn it on and nothing is happening... whats wrong with it and how do i fix this :(?

My phone has been asked to be plugged into itunes for the past hour or so, and it has been plugged in the whole time... i have tried holding in both buttons too turn it on and nothing is happening... whats wrong with it and how do i fix this :(?

Does iTunes see your phone?
Do you have a PC or a Mac?
~Lyssa

Shake too sensitive?

Is there any way to deal with an iPad 2 whose "shake" sensor is too sensitive?
Simply typing on it is enough to trigger a "shake" response which undos what you just typed.
I am not asking about how to disable the shake sensor, but how to adjust it to make it less sensitive to unintended invocation.
Evidently, it has been this way out-of-the-box (ie, a few months), but the person using it didn't realize that it was not normal until they were typing on mine.

Wow. I did not even know that there was a shake to undo. Learn soething every day. But i notice your profile says you are on 4.3. It may be that they tweaked that with the more recent software upgrades.

Clicking on touchpad too sensitive, how to change..

I recently bought a Dell XPS 15 9530. I want to change the touchpad sensibility to clicking, as it is too sensitive, but I can't find this option in control panel --> mouse --> "dell touchpad".
I'm NOT looking for a way to change the sensitivity to moving the cursor, that one I can find, but clicking to select etc on the touchpad. What happens all the time is when I want to just move the cursor the touchpad believes I'm clicking and I accidentally select files/moves them etcetc..
Sorry for not being able to explain this better, english is not my first language.

Hi,
If the machine is on windows 8,
under the Windows 8 settings app (-> PC and devices -> Mouse and touchpad). This is apparently configurable only in the settings app, and not anywhere under the Control Panel.
Regards

The new 'improved text selection feature' is too sensitive.

The new 'improved text selection feature' is too sensitive. It tends to highlight a whole page whenever i try to highlight just a single line. And then it keeps on crashing!
Please fix!

Could you please share your pdf file with us at [email protected] so that we can investigate this issue?
Thanks,
Ankit
Adobe Reader Team

Apple mouse scrolling is too sensitive in Yosemite

I've use a wired USB Apple mouse with scroll ball (A1152) on my iMac 27", and since upgrading to Yosemite, the mouse scrolling has been way too sensitive and doesn't allow any fine adjustment of scrolling speed/acceleration in system preferences. In the Mouse preference pane, the 1st position on the Scrolling slider is way too slow–a full scroll of the bar down moves about 1/4 of a full webpage at native resolution with very slow acceleration. The 2nd slider position is not any faster than the 1st. The 3rd slider position accelerates way, way faster, and scrolls a distance of about 8 full pages using a moderate flick of the scroll ball. At this high sensitivity, I need to scroll fairly carefully to move only one page. In a finder window with 500 items, it accelerates fast enough to move from top of the list to the bottom with less than one full finger swipe of the ball at moderate speed. Any setting from 3-8 on the Scrolling slider is the same speed and acceleration and is way too fast to use in a well-controlled manner. The behavior system-wide and is the same in any browser (Safari, Firefox, Chrome). This is nothing like how it behaved in OS X Lion through Mavericks over the past four years. Also, I can set the scrolling slide to the 3rd position, close system preferences, and go back in to find that it has set itself to the 2nd position, but the scrolling behavior is that of the 3rd position until I move the slider again.
I've trashed some .plist files from ~/Library/Preferences/ that I thought would reset things (com.apple.driver.AppleHIDMouse.plist and others) upon logout/login, but the behavior persists. I've tried a few pieces of software to try to override mouse settings, and while they will affect the mouse tracking speed and acceleration, they don't work well at controlling the scroll speed. I've reset the PRAM and SMC. I've created a new user account. Nothing has allowed usable adjustment of scroll speed/acceleration of the Apple mouse.
Any suggestions on how I can regain in Yosemite the usable adjustment of scroll speed/acceleration that were in all previous OS versions would be appreciated.

Try setting the scroll wheel scaling manually, by running the following command in the Terminal and then logging out and then back in to re-load the settings:
defaults write -g com.apple.scrollwheel.scaling -float VALUE
In this case, try values of 1, 0.5, 0.25, etc, decreasing in half each time to see how the scroll wheel sensitivity responds, and then use the one that works best. Alternatively, you can use the system preferences to set the sensitivity to the two values you have used so far, followed by running the following command between each to see what the value is for each:
defaults read -g com.apple.scrollwheel.scaling
Then you can determine some intermediate value to use, and use the first command above to set it to that value (again followed by logging out and then back in so the value will load).

Use Trackpad to zoom in and out - Too sensitive in Safari 4

Hi, I just installed Safari 4 three days ago. Without changing any settings, now I found out that when I use trackpad to zoom in/out the font, it responses too sensitive than it did in previous Safari. It jumps up/down at least two levels every time I try to adjust the font size. It is not that controllable anymore.
Has anyone else noticed this? How do I fix this? Thanks!

Hi
Welcome to Apple Discussions
I have the same problem on my MacBook Pro. The zoom feature is way too sensitive for my liking, however, there is no way at the moment to control it. As this is a Beta version, these oddities will occur. Hopefully, when Safari 4 is released in final version (no date yet announced) this problem will be fixed.
As I previously did, let Apple know what you are experiencing with the trackpad via the Safari Menu>Report Bugs to Apple. If you want to go back to Safari 3, use the Uninstaller that's included in the Safari 4 Downloads package. This is the only safe way to go back to Safari 3.

Touchpad too sensitive on G580

Friends
My wife is using a Lenovo G580 with Win 8.1 and she complains that the touchpad is way too sensitive. Sometimes she hardly touches the surface, or even just touch the side of the touchpad and the computer does weird things. Is there a way to de-sensitive it? Or, can it be de-acitvated? The latter is not a good option as she uses it on her lap often and cannot use an external mouse at that time.
Thanks
Carl

Hi Calle2014,
Welcome to the Lenovo Community.
As per the query we understood that you are facing issue with touchpad very sensitive in your Lenovo G580 laptop.
As you have mentioned that the touchpad is very sensitive please go to control panel select mouse.
Select pointer option tab, under pointer option tab tick on enhance pointer precision and also set pointer speed to minimum or to the neutral and click on apply and ok. Now check for the issue.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Buttons too sensitive

Similar Messages

Maybe you are looking for