Buttons under source and record monitors not working

For some odd reason, the buttons under the source and record monitors are not working in Premiere. This is a new install, and I'm relatively new to Windows so I hope it is something obvious. Buttons in other CC apps work fine. Any ideas out there?
Windows 7
2 x 10 core CPU (40 virtual)
64 GB Ram
nVidia Titan
Decklink 4K
Latest Premiere CC build
Wacom Tablet

Yes, actually. I unplugged the Wacom, uninstalled the drivers and restarted. Problem still there. Other ideas?
Chris
=========================================
Edited by moderator to remove personal information

Similar Messages

  • Source and Program Monitor not working after October CC 2014 Update

    I updated to the October 2014 Replace of Premiere Pro and since then I have had major issues with the Source and Program monitors. 
    I can select a clip from the media browser and have it appear in the source monitor - click play.  The clip will play for a bit and the picture will stop, but the audio will keep going. After a few seconds the source monitor will just display a red screen and the audio will keep going.   The same things happens in the program monitor  (different clips that worked before the October 2014 update) will start displaying the yellow media pending screen - and then go to red after a few seconds.  Again - this is a mutli-camera sequence that worked before the October 2014 update. 
    I am pretty much dead in the water at this point.  And yes, I have rebooted, changed the Mercury play back engine from hardware to software.  Nothing seems to correct the issue. 

    I have had similar problems. In fact playback is so sluggish it is unworkable.
    In addition Audio in nested sequences doesn't play back, and when it does it is intermittent. Totally unworkable!

  • My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Monitoring and recording feature not working in UCCX

    Hi,
    The recording and monitoring option is not working in the new UCCX setup I have installed.I have configured following things for desktop monitoring as per the document
    1)Checked that IP Phones are diasy chained and speakers of Supervisor's PC is working,NIC card of agent's and supervisor desktops are compatible
    2)In web CDA P phones to be monitored have been configured
    3)In CCM configured the phone for "Span to PC port" as enabled also configured "Advertise G.722 codec" as disabled
    4)Ran postinstall.exe on agents system and checked if correct NIC adapter is being used for monitoring
    5)Checked the NIC binding order in UCCX server and that is correct
    I noticed one thing that "services"  in both CAD and CSD are showing as "partial services" and they are monitoring and recording services only.Hence is this problem related to these services? How do i correct the recording and monitoring issue?
    Regards
    Amit

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    I would first recycle the VOIP Monitoring Service on both node if this is HA.  This will not affect calls or call processing.
    In addition, you stated you ran post install on the clients desktop but have you ran post install on the server itself?
    In the desktop Administrator, what server is selected to be the default VOIP Monitor server?
    Jason M. Hutchinson

  • Wacom intros5 and dual monitors not working

    I know there are issues with Mavericks, dual monitors & USB, but I have a problem with my Intuos5 tablet: since installing Mavericks it no longer maps to both monitors. Changing settings under monitors and wacom sys prefs does not change anything. It will only map to monitor 1.
    in fact mapping under the wacom sys prefs doesn't seem to work at all.
    Any ideas other than going back to ML or waiting for a new driver?
    Anyone seen behaviour like this?
    Thanks

    The hatter wrote:
    You realize you do need graphic driver, and Nvidia has Windows 7 (32/64), and ATI is suppose to have a universal driver. No mention of what your card is. And I would hope x64.
    Good grief, but please a) don't use Apple drivers, b) always use the "troubleshoot compatibility" for any installer (control+click on the application) before running. Apple is treated as not supported and won't install (now) with build 7077 (after feedback finding it causes errors, love the way their feedback and testing really does work).
    Boot Camp can 'doorstop' in some cases a good installation.
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
    Use Driver Sweeper and then reinstall the latest compatible driver. And no, dual monitors does work.
    mine is the ati radeon 2600 hd xt and it worked flawlessly up until about 2-4 days ago,
    oh well, xp pro it is then,
    i dont want the headache of dealing with windows 7 beta!
    xp should be fine to use correct?
    will there be any other steps i will need to take in order for everything to function together well?
    thanks

  • Display settings and 2nd monitor not working

    Hi everyone, I have a tx2510 and Samsung 24 inch monitor. I have been using the Samsung as my monitor for months now with no issues. I went away with my laptop for a week and came back yesterday, hooked the analog monitor cable in, used it last night, eveything was fine, put it on hibernate and went to bed. This morning when I turned it back on, I got a floating Check Signal Cable box on the Samsung and no image at all on the notebook's screen. There is nothing wrong with the cable, connections were snug, it hadn't been touched since last night.
    If I unplug the cable from the notebook, I do get an image pop back up on the notebook screen. So I went into Display Settings to see what was what and became more confused. The Samsung is listed as the #1 monitor, yet when I click the Identify Monitors box, the #1 shows on my notebook screen? And instead of 1920 by 1200, 1280 by 800 is shown as the max res. The "This is my main monitor" and "Extend the monitor onto this desktop" options are both grayed out.
    #2 monitor is initially grayed but if I select it, it reads as "Default Monitor" with a max res of 800 by 600. Natural res for the tx2510 screen is 1280 by 800. If I select #2 and apply, it confirms, and then when I go back in to Display Settings, it's back to #1 (Samsung, even though the only image I can get is on the notebook's screen).
    It's hard to troubleshoot this issue because as soon as I plug the monitor cable in, my notebook goes black and I have nothing to work with.
    It's probably something simple but I really have no idea what to do next, drivers are current, I tried restarting, unplugged the battery, replugging the monitor cable. I need my 24" screen back!!! Any ideas appreciated...

    Disconnect all the peripherals and the battery and press and hold the power button for 20 secs... start the notebook and connect the samsung monitor... press Fn+F4 keys to cycle the display.....
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

  • I spilled coffee on the MacBook Pro retina 15. All the buttons are sticky and touchpad does not work. What can I do?

    Im fron Russia. In service Center the men in blu shirt says that I need to pay a lot of money and change everything inside the mac.. Is it true?

    Afraid so. Liquid spills can kill your computer. Most of the components will have to be replaced, which is why it's such an expensive accident. You may want to get an estimate to repair and compare it with the cost of buying a totally new machine.
    Same thing happens all over the world - not just in Russia!
    Clinton

  • Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

    Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

    Have you attempted a restore?

  • All button and touch pad not working except power button

    I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • Source Monitor and Program Monitor not playing back video

    The last time I used Premiere Pro CC was Oct 8 and the program worked fine. As of today, I reopened the project file and the source and program monitors are displaying nothing respectively. However, the audio playback for both are unaffected. I've tried making a completely new project with different video and I get the same error. I've restarted Premiere, restarted the computer, and reinstalled Premiere. No help. :/
    Premiere CC Version: 8.1.0
    Computer information:
      Model Name: Mac Pro
      Model Identifier: MacPro5,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.4 GHz
      Number of Processors: 2
      Total Number of Cores: 8
      L2 Cache (per Core): 256 KB
      L3 Cache (per Processor): 12 MB
      Memory: 16 GB
    Graphics  ATI Radeon HD 5770 1024 MB
      Processor Interconnect Speed: 5.86 GT/s
      Boot ROM Version: MP51.007F.B03
      SMC Version (system): 1.39f11
      SMC Version (processor tray): 1.39f11
      Serial Number (system): H00470SREUH
      Serial Number (processor tray): J504301VJBH8B    
      Hardware UUID: 4D6175EA-3353-5E84-BCA0-42A013A69BED

    Hi,
    Please go to File > Project Settings > General and change the video renderer to GPU Acceleration software only and see if that helps.
    Thanks,
    Rameez

  • I have an older nano (4th gen?) and it will not shut off and when you try to skip through songs it skips itself back.  Buttons seem to be pushing themselves. I've tried doing a hard reset and it did not work.

    My older nano is not working.  I have to keep it plugged in all the time because it does not shut off.  The buttons only work sometimes and then they scroll and skip forward and backward by themselves.  I have checked updates and I have also reset it back to factory and it is not working.

    Hello mistymorrill
    If after all that you have tried and your iPod nano is still not working, the refer the page below for further options.
    Service Answer Center – iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • Youdo inc. Apps Like Matrix music Pad And Tangible-GP Not working under OS4

    Youdo inc. Apps Like Matrix music Pad And Tangible-GP Not working under OS4. Is there possibility that apple will contact with them and ask to repair it. I paid for it and i want that working. Plz do something. Sorry for my english still learning. (:

    You need to contact the developer and tell them to update their applications. Apple won't.

  • HT4061 My phone can't turned on. I tried to press the home button and main button at the same time, but not working. what should I do?

    Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

Maybe you are looking for