Buying an X230: Order the RAM upgrade or buy later?

Hello,
I'm about to order an X230. In my experience, it's usually best to install the maximum RAM, so I'd like to upgrade to 16GB. Lenovo charges $340 for 16 GB DDR3 - 1600MHz (2 DIMM). 
Can anyone advise on whether it's cheaper / feasible to order the RAM elsewhere? From the posts here on upgrading RAM on the x230, I do see that some people have found it confusing to identify compatible RAM for their machines. 
I'd appreciate any advice.
Thanks!

I ordered my x230 with the i7 and minimum RAM from Lenovo. I will upgrade, like you, to 16 when I can. I have used Kingston in the past. I plan on just matching each 8 GB DIMM.

Similar Messages

  • I'm buying a MacBook Air from a retail store tomorrow, will I be able to get it with the RAM upgraded?

    I'm planning on buying a new MacBook Air from an Apple retail store tomorrow and wanted to check on what the policy is with getting a non-standard configuration.
    I'd like to get it with 8GB of RAM, do I need to call first, or reserve it or anything?

    If you are planning to stop by at a U.S. Apple Store, an alternate approach would be to buy (and pay for) the MacBook Air online, configured as you would like it.  One of the options available to you will be to pick it up at a specific Apple Store.  Then you could see the date it would be available for you to receive it.

  • How do I get the RAM upgraded when there is no Authorized Dealer in my country?

    I bought a late 2012 iMac at a Big Box store in Panama (Not Florida). No one spoke English and my Español is limited. I knew there was no optical drive in the maching and was prepared for that. But no where that I read while investigating this machine did it say : RAM not user installable.
    You have to go to an Apple Authorized dealer to have your upgrade installed! That means a $65 an hour or more service charge, if you have access to a dealer. Probably more since that have to disassemble the entire machine to do what was a 5 minute task for a user. I'm betting you have to buy the RAM from the dealer as well. That would be three times street price.
    Since I bought this iMac in Panama, the keyboard is Spanish. After some time with Apple Support, they still haven't given me an answer. Not that they didn't try. I found out on my own how to change the language and text. The keyboard now speaks English. However all of the keys, other than alphabet are still for a Spanish keyboard. How can I get new keycaps? (This questionmark was typed with the Underscore/dash key). I hate having to type several keys before I get to the right one.
    As to the RAM, I guess I took a beating on the overall price. $1539 without tax for an $1149 machine with 8GB RAM and no way to install it. No optical drive, another $69.
    APPLE! There is no Authorized Apple Dealer in the entire country of Panama! I tried purchasing from Amazon.com, but no one can ship outside of The U.S.A. However, the iMac I bought is identical to the one I tried to order. It was sold to me in Panama. What a bunch of crap. If they would have allowed my original order to be shipped, I would have no problems, be able to type at a speed prohibited by the wrong keycaps, Have the RAM pre installed, and be over $500 richer.
    I've been using Apples since the Apple][......some thirty years with over a dozen or more models! This is the first time I feel CHEATED!
    Lonnie Cross

    I would just contact Apple directly at 1-800- MYAPPLE and get all of this sorted out.
    You have a brand new iMac with one year of free, complimentary AppleCare plus free 90 days of telephone support.
    Call them, explain you situation very calmly to them and see if they can work something out for you.
    We are all just users here. We can't really help you with this issue. Apple , from time to,time, does peruse these forums, but not regularly. You got lucky last time. They may not see your posting this time.
    Only calling them direct will you get any help and assistance.
    Good Luck!

  • Avoid overclock after ram upgrade on MBP late 2009

    Hi guys, I'm from italy so please accept my poor english.
    The problem is the following:
    I installed a couple of 4gb ram 1066 (together with a 256 SSD) and all works fine but after the upgrade the computer heats very easly.
    It reaches temperatures of 70-80° (celsius) if cpu usage goes over 50-60%.
    I managed it with smc-fan-control, even if it is not namely correct.
    Today I was editing a video in iMovie and I recognised that in activity monitor the cpu usage wass telling 170% with respect to iMoive process.
    Is it possible???
    iStat pro always tells me max 100%, but probably it's wrong because if really an overclock occured it explains my problems of temperatures after the upgrade.
    Moreover, I never see a RAM usage more than a couple of Gb, so it seems that the ram is recognised, but not used properly!!
    Running iBench the ram seemed to be used a lot, well above 6Gb.
    Please help me

    No overclocking going on. You have a dual core cpu which can have 200% cpu activity, 100% for each core. 100 + 100 % equals 200%.
    Yes doing video editing put a stain on the system and it will heat up. Since your mac is a few years old it might have some dust build up in the fans or heatsink cooling fins. Use some compressed air to blow them out.

  • How many here have pre-ordered the CS4 upgrade ?

    How many of you have ordered their upgrade to CS4 ?
    I'm assuming everyone one here who contributes on a regular basis has done so already ?
    For those who have, is the approximate arrival date sometime in November ?, I believe I read this on the group here, or elsewhere. I'm getting the itch to press the order button, because I am looking forward to the ability to edit AVCHD files directly.
    Dave.

    We're all users here. Your safest bet is to ask Adobe for an authoritative answer.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Why my iMac (mid 2010 - model 11,2) doesn't recognize the RAM upgrade?

    Hi, I have a big problem. I bought on Amazon 16 GB of RAM (Corsair Ddr3 1333Mhz 4Gb 204 Sodimm unbuffered). The problem is: my iMac can recognize a max of 3 benches of RAM but not 4. Everytime i try to upgrade all the 4 benches the iMac freezes and does 3 loud beep, while when upgrading only 3 benches it works. These are the attempts i made with every single bench of RAM:
    -2x2GB Original RAM - IT WORKS
    -1x4GB bought RAM - IT WORKS - i try every single bench of RAM, this means that the products are ok.
    -2x4GB bought RAM - IT WORKS
    -3x4GB bought RAM - IT WORKS
    -4x4GB bought RAM - DOESN'T WORK - 3 beeps signal
    -3x4GB bought RAM + 1x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    -2x4GB bought RAM + 2x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    Is there someone who had the same issue and can tell me how to solve it?
    Thanks!

    As has been mentioned endlessly in this Forum, iMacs are particularly sensitive to the exact Brand of RAM that they will run Stabley with.  Samsung, Crucial and OWC's are noteworthy brands that have consistently received glowing reports of compatibility herein.  Straying to other brands frequently results in the kind of problem you are experiencing.
    I would concur with X423424X that you return the Corsair modules and go with OWC (http://www.macsales.com) or one of the others I've recommended.
    Hope this helps

  • Where can I upgrade the RAM on my Macbook late 2007?

    IS there any sites, besides apples, to let me buy RAM for my late 2007 white macbook?
    Thanks!

    Here's another http://dealnews.com/memory/prices/systems/Apple-Mac-Book-PC2-5300-DDR2-SODIMMS/4 3938/1GB.html

  • 320GB really the max upgrade for MacBook (Late 2008 Aluminum Uni)?

    So, I've got my MacBook. It's the 13.3" aluminum unibody, from late 2008. Everything in it is stock, except I've upped the memory from 2GB to 4GB. The harddrive is still the original 250GB, which is pretty much full. I've been told by Apple that the highest capacity I can put into this one is 320GB, yet I see tons of posts from people who have put 500GB/1TB drives in and was wondering how THEY can do it, but I can't.
    Any suggestions/advice?

    Welcome to the Apple Support Communities
    It's listed as a MacBook. See > http://support.apple.com/kb/ht1651#link2
    As you can see, Apple officially supports 4 GB of memory in the Late 2008 Aluminum MacBook, but you can install 8 GB of memory without any problem. You can buy the memory in OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

  • Why the singles i buy are not in the album when i buy the full album

    Everytime I purchase a single weeks berore the release of the full album,
    the single is never WITH the album other songs...it's a seperate song. It's really annoying

    Here is the backtrace,
    [4] scim::__initialize_config(), line 131 in "scim_global_config.cpp"
    [5] scim::scim_global_config_read(key = CLASS, defVal = 5000), line 183 in "scim_global_config.cpp"
    [6] scim::scim_get_default_socket_timeout(), line 1214 in "scim_socket.cpp"
    [7] scim::PanelClient::PanelClientImpl::PanelClientImpl(this = 0x8085318), line 86 in "scim_panel_client.cpp"
    [8] scim::PanelClient::PanelClient(this = 0xfbfe9510), line 566 in "scim_panel_client.cpp"
    [9] __SLIP.INIT_I(0xfbfe11e8, 0xfbfc33f9, 0x8046e8c, 0xfbfcd807, 0xfeffa7d0, 0xfe660438), at 0xfbfb035f
    [10] __STATIC_CONSTRUCTOR(), line 301 in "gtkimcontextscim.cpp"
    [11] __cplus_fini_at_exit(0xfbf93760, 0xfe660438, 0xfeffa7d0, 0xfbc10df8, 0xfefd05dc, 0xfbc10df8), at 0xfbfcd807
    [12] call_init(0xfbc10df8, 0x3), at 0xfefd380f
    [13] is_dep_init(0xfe660438, 0xfbf80490), at 0xfefd357c
    [14] elf_bndr(0xfbf80490, 0x2d8, 0xfbe6ccbf), at 0xfefde53c
    [15] elf_rtbndr(0x2d8, 0xfbe6ccbf, 0xfbfe9594, 0x0, 0xfbf2f200, 0xfbe6cc79), at 0xfefc8c24
    [16] 0xfbf80490(0xfbf2f200, 0xfbe6cda9, 0x8046fcc, 0xfbf0890b, 0xfeffa7d0, 0xfbf80490), at 0xfbf80490
    [17] __STATIC_CONSTRUCTOR(), line 42 in "string.cc"
    [18] __cplus_fini_at_exit(0xfeffa2d8, 0xfe660438, 0xfeffa7d0, 0xc, 0x8047024, 0xfefd7d91), at 0xfbf0890b
    [19] call_init(0xfbc10db0, 0x1), at 0xfefd380f
    [20] load_completion(0xfe660438, 0xfec425b0), at 0xfefd3dfa
    [21] dlmopen_intn(0xfeffa2d8, 0x8066c40, 0xd01, 0xfec425b0, 0x0, 0x0, 0x80470d0), at 0xfefd7ff0
    [22] dlmopen_check(0xfeffa2d8, 0x8066c40, 0xd01, 0xfec425b0, 0x80470d0), at 0xfefd80e0
    [23] _dlopen(0x8066c40, 0x101), at 0xfefd81a1
    [24] gmodule_open(0x8066c40, 0x1, 0x0), at 0xfc59118a
    [25] g_module_open(0x8065008, 0x0), at 0xfc59175c
    [26] query_module(0x8064308, 0xfee84042), at 0x805137a
    [27] main(0x1, 0x80471f0, 0x80471f8), at 0x8051651

  • Is the Ram in a MacBook Pro user upgradable?

    I have a MacBook Pro and i was wondering is it user upgradable? If i upgrade my RAM not using apples RAM will my warrany get voided?

    BadMaush wrote:
    I have a MacBook Pro and i was wondering is it user upgradable? <snip>
    Read your user manual. The RAM upgrade procedure is explained, with pictures.

  • How do you remove the case to upgrade the ram for a dm-1 4142 pavilion notebook.

    How do you remove the cover to upgrade the rem for a Pavilion DM-1 4142? Does it just snap off?

    Is this the HP Pavilion dm1-4142nr?
    The RAM bay is generally on the bottom of the notebook. See the RAM Upgrade Guide for details.
    Larry
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • Which configuration of iMac 27" ?  Fusion drive or not ? RAM upgrade ?

    I'd love to get a new 27" iMac for my Mother, but cannot decide if the higher i7 processor (3.5) is worth the price, and cannot decide if the 3TB "Fusion" drive is worth the extra $350. 
    The retail Apple stores stock the i7 only with the 3TB Fusion drive, the better graphics card, and stock 8GB of RAM, but one can configure the machine if ordering on-line via the link below.   Her husband will reimburse me or it will be a gift.  Money is not the issue.... just whether or not the money is worth spending.
    One last thing:  The apple store rep said that the "Geniuses" have to do the RAM upgrade, say from 8GB to 32GB because the 21" unit has to be opened.  So the consumer doing the RAM upgrade will void the warranty. Yet I see website indicating that the 21" has a nice convenient door to open and the RAM is user-upgradable without voiding the warranty.  Which is true ?
    Apple wants to charge $600 (parts and labor) for the RAM upgrade to 32GB.   But Crucial has 32MB of this RAM for under $300 with a lifetime warranty.  Is there a reason to use the RAM from Apple ?
    LINK: http://store.apple.com/us/buy-mac/imac?product=ME089LL/A&step=config

    1. 27" iMac with 3.4Ghz i7 and NVIDIA GeForce GT 775M with 2GB video memory is just $200 more than 27" iMac with 3.2Ghz i5 and NVIDIA GeForce GT 755M with 1GB video memory. How much is her time worth per hour? If it's for business use, it pays for itself quickly. Same opinion for the 'build-to-order' upgrades in speed and video available on the 27" i7.
    2. Fusion drive is a hybrid combining 128GB SSD with either a 1TB or 3TB rotating platter hard drive.
    Analysis and review of Fusion drive in a 2012 iMac: http://www.anandtech.com/show/6679/a-month-with-apples-fusion-drive
    Conclusions and performance are on pages 5 and 6 of the review.
    3. 27" iMac RAM is "user-replacable", quoting from the 2013 'Important Product Information' addendum to the manual:
    "Do Not Make Repairs Yourself
    Your iMac doesn’t have any user-serviceable parts, except for memory, which is user-replaceable in 27-inch models only. Do not attempt to open your iMac. If your iMac needs service, contact an Apple Authorized Service Provider or Apple for service.
    If you open your iMac or install items other than memory in 27-inch models, you risk damaging your equipment. Such damage isn’t covered by the limited warranty on your iMac."
    quoted from http://manuals.info.apple.com/MANUALS/1000/MA1662/en_US/imac_late2013_ipig.pdf
    OWC video of the 27" RAM upgrade installation: http://eshop.macsales.com/installvideos/imac_27inch_late_2012_mem_m/
    4. If it's for business, go for the i7 and the video upgrade.
    5. I'd do the upgrade myself, purchasing from a reliable vendor of Apple RAM such as crucial.com or macsales.com. I have no experience with the other vendor you mentioned, RAMfinder.com. Factory-installed RAM offers the pricey convenience of having a machine configured by you online and shipped directly to your mother in a few days with no one else needing to be involved.  I'd avoid any Apple salesperson who apparently doesn't know the 27" iMac product well enough to give you the truth about user-installable RAM upgrades. OWC (macsales.com) will purchase system-pull original RAM allowing you to recoup a small portion of the cost of the upgrade, though nothing close to the resale price of the RAM.
    Message was edited by: kostby

  • Battery drains while sleeping after RAM upgrade

    Installed 16 GB of RAM and a Hybrid/SSD 1 TB internal HD on MacBook Pro 15" mid 2012 and now the battery drains while the computer is in sleep mode, about 1-3 % per hour. Before the RAM upgrade (stock 4 GB of RAM) there was no noticeable battery drain, so I assume it has to do with the upgrade. I read that it takes more power to maintain 16 GB of RAM during sleep, so my questions are as follows:
    Is 1-3% per hour normal?
    Will resetting the SMC help the issue?
    Does the Hybrid HD have anything to do with this?
    I am not too happy about the battery drain as it happens that I don't use my laptop for some time and prior to the upgrade the loss of battery charge was not an issue at all. Is this the price I have to pay for maxing out my RAM or is there a way (resets, settings, etc) to reduce the amount of battery loss
    Thanks for your input.

    Hi everybody. I have the same question. I have a macbook unibody late 2008. I have recently upgraded the OS to Yosemite. In order to have a smoother functioning of the system I have immediately replaced my original 2Gb (1+1) RAM with 8 Gb (4+4). Since then, I have noticed a dramatic reduction of my battery charge during sleep mode. Now after 8 hours of sleep it goes from 100% to around 65% (before it was 95%). Is it a natural consequence of having installed a larger RAM or there could be anything wrong with my settings?
    I have read a couple of articles about standby mode and standbydelay setting but this does not apply to my model of macbook.
    Here is my pmset -g result:
    Active Profiles:
    Battery Power        -1*
    AC Power        -1
    Currently in use:
    hibernatemode        3
    acwake               0
    lidwake              1
    halfdim              1
    sleep                20 (sleep prevented by AddressBookSour)
    ttyskeepawake        1
    sms                  1
    hibernatefile        /var/vm/sleepimage
    disksleep            10
    displaysleep         2
    Thanks a lot for any comment / suggestion /hint.
    Bye

  • Multi-Channel Ram Upgrade

    I just purchased imac 20.5in with the 2.8MHz i7. I want to upgrade the ram. Would buying one of the multi-channel kits for this machine provide any extra benefit? If so, how many channels can the new imacs support?

    Just go to OWC to see what's approprate for your model and possible permutations.  Since you  didn't specify exactly the model (year) of your imac, here's a link to OWC page to choose memory configurations.
    You don't have to buy from there.  But it will give you an idea of what you can get for your model.
    Update:
    You sure of that 20.1" number?  Could it be 21.5"?  If so here's OWC page for a 2011 21.5 2.8Gz I7. If it is that model you need,
    204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

  • U310 RAM Upgradable? Voided Warranty?

    Hi --
    I am a tentative Lenovo buyer and was am set on getting the U310 Ultrabook.  I do notice though that it only has 4 GB of RAM.  I would ideally like to upgrade this upon getting the laptop.  Is this possible?  I have researched it and cannot find any answers for this particular model.  I just do not want to buy the laptop and find out that it does not have an extra slot to upgrade the RAM so I am stuck with 4 gig.  If this is the case, then I may just spring the extra $100 or so and get the U410 Ultrabook.
    Secondly, will doing anything like this by myself void the warranty?  I certainly would not like that to happen.  
    Let me know and if anyone has any advice on the U series; I'm hoping to buy today before this sale is over.
    Thanks!

    I just upgraded and wanted to share some notes.  The quick answers are:
     - Yes, opening the case voids the warranty (and needs to be done carefully)
     - Yes, the machine can run 8GB of RAM
     - and (bonus) you can use the mSATA SSD drive as a regular SSD drive--and upgrade it as well
    The only potential hiccup is that you may need to flash BIOS version 65CN21WW for the RAM upgrade to work.  Initially my machine would not boot or POST with the 8GB stick.  After flashing this version things went smoothly (aside from needing to re-apply BIOS settings to get Windows 8 to boot again).
    Here's more details:
     - my machine is the non-touch screen i3 based system
     - I used the Crucial memory advisor to locate the 8GB stick of RAM and a 240GB mSATA SSD
     - There are useful YouTube videos showing how to remove the back panel.  Basically you pry off the rubber feet, unscrew the 4 screws you'll find, then (VERY) carefully work your way around the space between the back panel and the silver plastic
    For my dual-boot setup:
     - Fully shutdown Windows (being sure not to use Intel Rapid Start--you want it to be a complete shutdown)
     - In the BIOS disable IRST
     - Switch the drives to AHCI mode in the BIOS (you'll need to reload Windows after doing this)
    From there I installed Windows 8.1 to a 250GB partition on the 500GB spindle drive.  Ubuntu GNOME 13.10 went on the entire SSD, with the other 250GB of the spindle drive available for slower-speed storage.  With my increased storage I'll be considering if both OS's should reside on the SSD for performance, with extra storage on the larger drive.

Maybe you are looking for

  • How do I use the following code in such a way that it will display what is indicated by the word "echo"?

    if(exist chrome.exe $true)  echo internet is ready  else  echo get chrome!! I want to use the above script to cause the shell to display either "internet is ready" or "get chrome!!" depending on whether or not a user has Chrome but the shell keeps gi

  • How to stop and start process SAPOSCOL

    Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same. Collector           : running Start time coll.    : Mon May 21 17:49:49 2007 Current Time        : Mon Jun 11

  • ALV to Excel Format problem

    Hello Freinds, I am trying to download the o/p of ALV report into an excel sheet.But the o/p in excel sheet is distorted to some extent.Some of the headers appear in the next line even if there is no limit of rows in office 2007 which is there on my

  • "Unable to find Pdf Resource files"

    I am getting an error message on start up in Windows XP after a recent update. On start up I get the mesaage "Unable to find Pdf Resource files" C:\Documents and Settings\......\Adobe\Adobe PDF\Settings\*.Joboptions Do you want to run the installer i

  • Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

    Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showin