Buying student/teacher CS when owning one of the programs

A few months ago I purchased a student/teacher edition of Flash and now I'm thinking of getting CS Design Premium, with the one license per year rule will there be any problem with having two versions of Flash?

Hi Stu, technically it shouldn't be a problem because according to the education edition rules they are different titles

Similar Messages

  • What happens if I buy a movie bundle but own one of the movies in the bundle?

    It has happened several times now that I'll see a movie bundle deal that I would LOVE to purchase, but I already own one of the movies in the bundle. Sometimes, I've looked at individual pricing and noticed that each individual movie has been discounted. But not always. What would happen if I were to buy that bundle? Would the price be adjusted for the movies I already own? Would the purchase be cancelled since I already owned one of the movies? I'm hoping that buying a single movie in a series automatically disqualifies you from any bundle packages in the future. But I suspect it might.

    oops, typo... "...doesn't automatically disqualify you..."

  • How do I change my plan to the student/teacher plan when I have the individual plan

    how do I change my plan to the student/teacher plan when I have the individual plan?

    To change your subscription you FIRST need to contact Adobe support to be sure you will not have to pay a termination fee - Adobe contact information - http://helpx.adobe.com/contact.html
    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    When you buy an Education subscription, the terms you "click to agree" should be clear about the first/later years
    -One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    Redemption Code https://creative.adobe.com/educard
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow

    Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
    Code:
    -- AUdit Code Begin
    -- Note: Ony for those tables having 'AUDIT' UDP
    -- Value set to 'T'
    IF (Select Count(*) From DBConfiguration
    Where ConfigurationCode = 'AUDIT' AND
    ConfigurationValue = 'T') > 0 THEN
    WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
    :old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
    :old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
    :old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
    :old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
    CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
    :old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
    :old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
    :old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
    CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
    :old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
    End;
    WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
    CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
    CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
    CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
    CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    End if;
    -- Audit End
    Error:
    95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
    ( - + case mod new not null others <an identifier>
    <a double-quoted delimited-identifier> <a bind variable> avg
    count current exists max min prior sql stddev sum variance
    execute forall merge time timestamp interval date
    <a string literal with character set specification>
    <a number> <a single-quoted SQL string> pipe
    <an alternatively-quoted string literal with character set specification>
    <an alternativ
    97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
    * & - + ; / at for mod remainder rem <an exponent (**)> and
    or group having intersect minus order start union where
    connect || multiset

    Here is the code:
    -- AUdit Code Begin
    -- Note: Ony for those tables having 'AUDIT' UDP
    -- Value set to 'T'
    IF (Select Count(DBConfigurationValue) From DBConfiguration
    Where DBConfigurationCode = 'AUDIT' AND
    DBConfigurationValue = 'T') > 0 THEN
    WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
    :old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
    :old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
    :old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
    :old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
    CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
    :old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
    :old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
    :old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
    CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
    :old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
    End;
    WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
    CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
    CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
    CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
    CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    End if;

  • PLS-00103: Encountered the symbol "" when expecting one of the following:

    Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
    <CFQUERY DATASOURCE="CRM">
    create or replace trigger AWC_ACCESSROLESID_TRI
    before insert on AWC_ACCESSROLES
    for each row
    begin
    select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
    end;
    </CFQUERY>
    But the created trigger is not compiled, it is giving the following error
    "Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
    If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
    Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
    Thanks in advance,
    Vinod

    So it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
    Cheers, APC

  • PLS-00103: Encountered the symbol "end-of-file" when expecting one of the f

    I'm trying to follow an example pl/sql program to select from one table and insert into a second table in a LOOP.
    I get a syntax error which I can't figure out
    Line # = 67 Column # = 0 Error Text = PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
    begin case declare end exception exit for goto if loop mod
    null pragma raise return select update while with
    <an identifier> <a double-quoted delimited-identifier>
    <a bind variable> << close current delete fetch lock insert
    open rollback savepoint set sql execute commit forall merge
    pipe
    What is the cause?
    IS
    BEGIN
    declare
    v_pk1 bb_bb60_stats.pk1%TYPE;
    v_event_type bb_bb60_stats.event_type%TYPE;
    v_user_pk1 bb_bb60_stats.user_pk1%TYPE;
    v_course_pk1 bb_bb60_stats.course_pk1%TYPE;
    v_group_pk1 bb_bb60_stats.group_pk1%TYPE;
    v_forum_pk1 bb_bb60_stats.forum_pk1%TYPE;
    v_internal_handle bb_bb60_stats.internal_handle%TYPE;
    v_content_pk1 bb_bb60_stats.content_pk1%TYPE;
    v_data bb_bb60_stats.data%TYPE;
    v_timestamp bb_bb60_stats.timestamp%TYPE;
    v_status bb_bb60_stats.status%TYPE;
    v_session_id bb_bb60_stats.session_id%TYPE;
    v_messages bb_bb60_stats.messages%TYPE;
    INSERT_COUNT NUMBER := 1;
    CURSOR curs_aa
    IS
    SELECT * from bb_bb60_stats.activity_accumulator ;
    BEGIN
    OPEN curs_aa;
    LOOP
    FETCH curs_aa into
    v_pk1,
    v_event_type,
    v_user_pk1 ,
    v_course_pk1,
    v_group_pk1,
    v_forum_pk1,
    v_internal_handle,
    v_content_pk1 ,
    v_data,
    v_timestamp ,
    v_status ,
    v_session_id ,
    v_messages;
    INSERT INTO csuh_custom.aa_partitioned
    VALUES
    v_pk1,
    v_event_type,
    v_user_pk1 ,
    v_course_pk1,
    v_group_pk1,
    v_forum_pk1,
    v_internal_handle,
    v_content_pk1,
    v_data,
    v_timestamp,
    v_status,
    v_session_id,
    v_messages
    -- commit after every 100 inserts to avoid large rollback segments
    IF INSERT_COUNT = 25000 THEN
    COMMIT;
    INSERT_COUNT := 1;
    ELSE
    INSERT_COUNT := INSERT_COUNT + 1;
    END IF;
    END LOOP;
    CLOSE curs_aa;

    When I add the END;
    I get
    Line # = 66 Column # = 0 Error Text = PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
    begin case declare end exception exit for goto if loop mod
    null pragma raise return select update while with
    <an identifier> <a double-quoted delimited-identifier>
    <a bind variable> << close current delete fetch lock insert
    open rollback savepoint set sql execute commit forall merge
    pipe

  • MAC OS Yosemite - CS6 - A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one

    - A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!

    Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.

  • I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    Hi,
    No serial needed for subscriptions.Your applications can't communicate with the activation server.
    Check and delete Adobe entries on your hosts file as explained on step 3 :
    Sign in, activation, or connection errors | CS5.5 and later

  • When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

  • HT201209 When my purchase points in one of the programs through the iPhone show me this message:- Your purchase could not be completed.. contact iTunes store support to complete this transaction

    When my purchase points in one of the programs through the iPhone show me this message:- Your purchase could not be completed.. contact iTunes store support to complete this transaction??

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

  • I am planning on buying an iphone 4 from some one. The phone still has the Apple Care Protection plan on it. Would there need to be a transfer of plan onto my name? If so, how is this done?

    Hi, I am planning on buying an iphone 4 from some one. The phone still has the Apple Care Protection plan on it. Would there need to be a transfer of plan onto my name? If so, how is this done?

    As the others have said, transferring AppleCare to your name is not absolutely essential. It can make things easier in some cases, though, should questions arise, so it's worth having done. The person from whom you're buying the iPhone will have to call AppleCare Plan Administration (s/he can call the normal Apple support line and ask to be transferred) and arrange to have the plan transferred to you.
    Regards.

  • HT201272 I'm trying to buy some gold and money for one of the race games but they said contact i tune

    Imtrying to buy some gold and money for one of the race games but they said I should contact I tune

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

  • I bought adobe student teacher 1month ago, but all my adobe programs still on trial, and my adobe muse now expired. What should I do?

    I bought adobe student teacher 1month ago, but all my adobe programs still on trial, and my adobe muse now expired. What should I do?

    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT201487 i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    That's not very intuitive
    Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.

  • When I start installing the Program Manager it gives a message from adobe saying that the software appears to be counterfeit (error code 205)

    When I start installing the Program Manager it gives a message from adobe saying that the software appears to be counterfeit (error code 205)

    Errors 201 & 205 & 206 & 207 or several U43 errors
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

Maybe you are looking for

  • IPhone 4s email sending no longer works after installing ios7

    Installed ios7 on my iPhone 4s and now email is completely fouled up. I have deleted all accounts and reset them, have turned off and restarted my phone severeal times, Oddly enough I can receive email, but when I try to answer I get the message "Can

  • Error: Message E RSDODSO 201 cannot be processed in plugin mode HTTP

    Hi all, We have developed a BSP page in which, on button click, the onInputProcessing has a code written where 'Performs' in ABAP programs are being called. When i execute the page, the layout gets executed fine. But on clicking the button after ente

  • Customizing User Name Policy OOTB Plugin

    Hi I want to use the User Name policy generation plugin to generate the user id for an oim user. But the requirement is that we have to create the User ID with Preferred Name(not with first name) and Last Name and the issue is that in the code we can

  • Bad video quality on primary screen in SLI set-up

    Hey all, I've got this specific problem with my video cards. The color is absolutely horrible when i use my two 460GTX Hawk in SLI mode on a dual screen setup. The strange thing is that this problem only is visible on the primary screen. Example prim

  • How do I delete all my old itunes library from my iphone 4?

    I bought a new laptop so I created a new Itunes Library. I tried to sync it to my iphone but the old library on my Iphone won't delete. How do I delete it?