Buzz/alert sound every two minutes

Since installing Yosemite, my iMac has starting making and annoying buzzer/alert sound approximately every two minutes. I've captured a recording of it here.
Can anyone tell me what this is? It's driving me crazy! I've installed Sound Bunny which shows you all the applications that a making sound and it's not reporting any applications. I don't have any notifications and have closed all applications.
Thanks

do you happen to use airmail 2? I had the exact same problem and I went to settings -> general -> sounds and unchecked that box and that solved the problem.

Similar Messages

  • W520 beeps 4 times every two minutes

    This morning I started up my computer from its sleeping mode, and it beeped four times. It keeps on happening consistently every two minutes.
    Basically, it does this, within two seconds:
    beepbeep...beepbeep...beepbeep...beepbeep
    It is incredibly annoying, and searching on the Internet has proved fruitless. I am able to all functions normally, except listen to sound because it overlays any other sound. I don't know what it means. If anyone could help, it would be much appreciated.

    TrimHopp,
    Welcome to the Support Forums
    What is your exact machine type of W520? what operating system it is running? The machine type can be found on a sticker on the bottom of the unit. Any recent changes to the computer?
    When you boot into BIOS does the machine still make the beeping noise?
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

    Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

    I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

  • Write data to serial port every two minutes

    Hi,
       I use VISA-Write to write data to serial port. I want to write a byte every two minutes. What should I do?
      Thanks!

    hengfo,
    that question is not connected to LV nor to VISA. Its more a systematic question....
    So let's view at this a bit more abstract:
    You want to "toogle" between two different messages sent to your interface. So you have to know:
    - What was the last state i sent?
    - When do i have top send the new state?
    Even more abstract:
    - How can i switch between the states?
    Since the states are known before your program is executed, you can insert them into an array. Next, you have to read out the appropriate index from the array which contains your new state. Send the state and go to the next state. Propably you want to change timing, but that's easy too.
    See attached screenshot for a possible solution:
    hope this helps,
    NorbertMessage Edited by Norbert B on 09-11-2007 07:57 AM
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.
    Attachments:
    StateSwitching.PNG ‏8 KB

  • My MacBook Pro makes a beep sound every few minutes.  Why?

    My new MacBook Pro makes a beep sound every few minutes.  Why?

    If you have a Seagate 500 GB 7200 RPM drive model ST9500420AS or ST9500420ASG, there is a widely reported problem with MacBooks that causes intermittent clicks and beeps.  If that is your scenario, google for details.

  • My podcasts stop every two minutes - how can I fix?

    Hi all,
    I'm hoping someone may be able to suggest how I can fix this annoying problem:
    When I listen to podcasts on my iPod nano, they stop every two minutes. I have to then press wake button and then the play button. Then it stops again after about two minutes as if it had gone to sleep. So I repeat the above steps ad infinitum. Only had it a few days and don't think this is normal or know how to fix or if should take it in for a serviceperson to look at. Can anyone with similar experience or any advice please respond. Thanks Ben.

    The most likely problem is that the headset jack is not fully inserted. With the 1.1 update,there is a feature that senses when a headset is inserted. If there is not one, it pauses playback when the screen goes dark to preserve battery life.
    Many folks have had an issue with not fully inserting the headset. When the headset is fully seated, you will hear and feel it click into position. You should not be able to see ANY of the silver of the plug when the headset jack is fully inserted, if you can, it is not in far enough. If you have have pushed it in as far as you can - as hard as you can, then there may be debris in there. Any debris could cause this, since the sensor that tells the nano that the headset is seated is at the bottom of the hole for the headset jack
    i.

  • Network glitch every two minutes

    I'm trying to troubleshoot an issue where by applications sending data between 2 Solaris 10 x86 machines (v40z) will hang for about 1 second every two minutes. The interval between the hang is very regular (2 minutes almost to the milisecond) but it doesn't land on a predicitable second each test (eg, 12:34:52, 12:36:52 in one test, 13:13:20, 13:15:20 in another).
    It appears to be independant of the application. I can see it during long file transfers using scp as well as internal applications that push steady streams of data. The usual checks with prstat and such don't show anything spiking on the nic, cpu, etc. Packet captures don't show anything unusual coming or going at the times of the hangs. It lasts for 1-1.5 seconds.
    The July Recommended set is applied.
    Has anyone else seen anything like this?

    FYI, this ended up being two different situations. In one spot there was a bogus route in the table that was theoretically benign, but removing it made the spikes disappear. The other situation was revolved by removing ipmp from a high-load situation.
    My conclusion is that there is something in the driver or stack that is configured to happen every two minutes which can make itself obvious when in the presence of certain networking misconfigurations. I have not patched and retested the ipmp stuff since the original post, but I don't know that that would necessarily be conclusive if it still existed, what with all the ipmp patches coming out lately.

  • I have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

    i have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

    See Here for Device continually restarts...
    http://support.apple.com/kb/HT1808

  • Apple TV dropping WiFi connection every two minutes

    Hey there,
    So I bought an Apple TV a couple days ago. Product looks great and looks absolutely gorgeous on the TV I have. My only problem (and its a HUGE problem) is that the device drops my WiFi every two minutes. Specifically when watching videos.
    So in effect I cant stream any video - be it from YouTube, iTunes, NFL, Vimeo or even over AirPlay - because every time I do the signal drops and I'm thrown back to the main screen.
    My WiFi pretty good. I have an iPhone, an iPad, two PC laptops and a Samsung smart phone that use the same network without any issues.
    Please help me with this problem. I really really like the product but its practically useless with this issue.

    Other devices working doesn't rule out a network issue.
    Try connecting Apple TV via ethernet
    Go to istumbler, netstumbler or similar to get a network report. Look for signal strength, noise, and nearby networks.

  • MacBook Pro Medio 2012 freezes literally once every two minutes?

    Hello Apple Support Community,
    I have a MacBook Pro Medio 2012 running the latest edition of OS X Mountain Lion which I have been enjoying for almost a year now. I must say that it's the best machine I've ever owned and I have never encountered any problems with it. Until last friday. I was using it at home before school, browsing internet, listening to music and chatting on IRC. I then closed it down and went to school. When I started it at the school it suddenly was really slow and literally froze every two minutes. I spent most of the day figuring how to solve this really annoying issue and I searched a lot on Google a lot. I gave up and decided to do a complete re-install of OS X through the menu you can open when booting (cmd + r).
    I have this one time earlier and this time it took far more time than last time. It took me 12 hours this time.. Anyway, it finished the install of OS X and I configured my account and such. I now thought that everything should be well, but no. I have the exact same issues as before and I can't seem to figure out how to solve this annoying issue. Which is also the reason for me to come and ask you guys.
    Things I already have tried:
    - Re-installing OS X
    - Clearing the SMC
    I hope this problem can be solved without any costs. I'm a student which obviously means that I don't have a lot of money to spent on such things.
    Regards
    Daniel

    Honesty you have already test it. When you have the original RAM installed the system did Not Freeze, Correct?
    Then you installed this other RAM and Now the system Freezes. The RAM you installed is either Bad or not the correct type for your Model Mac.
    Sure there could be some other reason, But I doubt it. Simple test. Reinstall the original RAM. If the system does not freeze then you have your Proof, the new RAM you bought is either Bad or the wrong type.

  • IMac beeps about every two minutes. Why?!

    I got home from work today and my iMac (early 2009 model) was beeping. It beeps once every 2 minutes or so. I ran the Apple Hardware Test (I think that's what it's called - the thing I have to insert the install disc to run). It came up with nothing being wrong. I have absolutely no clue why it's doing this. My sound is muted and it still happens and it happened even when I was in the Hardware Test.
    Could it be a memory issue?
    Any suggestions on what is causing this and/or what I should do?
    Thanks.

    HI,
    Three beeps in a row means there's a problem with the RAM.
    More information here.
    http://support.apple.com/kb/HT2538
    Boot from your install disk and run Disk Utility. (Not the same as Apple Hardware Test).
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
    Carolyn

  • Alert sound every time I use the command key

    Hi, I thought I'd try posting a new topic in case anyone's found the solution for this (I hope!).
    Ever since updating to Snow Leopard, everyone in my office is getting an alert sound (in my case, "funk") whenever we do a shortcut using the "command" key, eg. "command-n", "command-s", "command-w", "command-q", etc.
    It's very annoying, and no one can find a way to turn it off. We've simply had to turn our overall volume down to 0, but of course that doesn't work if you want to listen to music with headphones.
    It was never an issue with previous versions of OS X, but as soon as we all upgraded every one of us had this issue. Has anyone else?
    Thanks,
    Kevin

    Okay, so I came up with a workaround... not a solution to the root of the problem, but a workaround.
    I made an AIFF file that's one second of silence, saved it as Silence.aiff and placed it in my System > Library > Sounds folder.
    Then I went to the Sound System Preferences, and changed my main alert sound to "Silence".
    The only problem with that is any time you would normally want to hear the alert sound you won't hear anything, for example when a dialog box pops up asking you if you want to save before quitting. But any other sounds are still just fine.

  • Is there any mac/iOS app or feature I can use to alert me every five minutes?

    I need an app or a feature on Mac, iPhone, or iPad that will send me a push notification or some kind of alert every five minutes.
    I would rather not set up a million calendar alerts or alarms, as I will have to be using this a lot.
    It will need to run in the background, especially if it's an ios app.
    I would rather not use an iOS app that makes noise but doesn't send a push notification.
    An iOS app is preferred, but anything works.
    System alternatives will be accepted as well.
    And no, I cannot simply ask Siri to do it, as I have tried in the past, and she says she can't do alerts that frequent.
    Thank you for the help!

    You could do this using AppleScript on your Mac.
    See: http://stackoverflow.com/questions/3718520/how-do-i-write-applescript-that-will- give-me-an-hourly-popup-alert for the basic code to do the repeating alert.
    Combine it with this for a Notification: http://macosxautomation.com/mavericks/notifications/01.html
    Quite simple really...

  • Unnerving sound every five minutes

    My new MacBook Air with Lion gives a little jingle every five minutes. What does that mean and how can I switch it off?

    I apologize, a thorough investigation together with my son revealed that the source of that sound was not the MacBook, but the mobile phone of my wife...
    I am sorry, but even with the good hearing of my son it took several measurements to locate the source.

  • "lock your computer" sound every few minutes

    My MacBook Air keeps playing the sound "Lock your computer" every few minutes. How do I disable this?

    solved

Maybe you are looking for

  • No more virtual tiles can be allocated

    Just installed PSE13 x64 on Windows 8.1. When attempting to select "Correct camera distortion" from the filter menu, I immediately got the error "no more virtual tiles can be allocated". I checked, and my scratch disk was set to an SSD with 53Gb of f

  • NoClassDefFoundError: weblogic/t3/srvr/ListenThread

    Anyone else getting this exception upon startup of WebLogic 5.1? The WebLogic Server did not start up properly. Exception raised: java.lang.NoClassDefFoundError: weblogic/t3/srvr/ListenThread java.lang.NoClassDefFoundError: weblogic/t3/srvr/ListenThr

  • Calling proc in sqlplus

    how do i execute this proc in sqlplus? create or replace procedure p1 (x in sys_refcursor) is a number; b number;   begin   fetch x into a,b;   dbms_output.put_line('a :'|| a || '   b : '||b); close x; end; Procedure created.Edited by: user520824 on

  • Disable Alarm/Event on CPI 2.0

    Hi, We have CPI 2.0 in production. and overwhelmed interface down/up alrms from access switches are annoying. Is there a way to turn it off, I believe it is on by default. Thanks

  • Exit Application FPM_CLOSE

    Hi, I'm using FloorPlanManager within ESS on EHP5, so I can only change the configuration using SERVER/sap/bc/webdynpro/sap/configure_component. I added a Logoff button with FPM_CLOSE event. This works fine as far at it closes the current window. But