BW 2.0B, info package selection, cant use two system variable for 0CALMONTH

Hi Experts,
I am working on BW 2.0B in APO system. There is an info package for which I want to supply two selection value for 0CALMONTH as equal to current month and last month. System variables 0CMONTH (for current month) and 0CMLMON (for last month) are available but I am not able to use them both.
If I change the variable in one selection, it automatically changes the other one too, making both the selection as same variable.
Can you suggest any solution/idea?
Regards,
Purvang

any ideas to achieve this?

Similar Messages

  • Issue withe Info Package Selection for the CRM Datasource

    Hello,
    I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
    I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
    To Be Noted:
    I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
    Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
    I found something not sure this might be the issue:
    1) The Data type is RAW with length 16.
    2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
    But no Selection option in the Info Package.
    Any suggestion and inputs are welcome.
    Thanks in advance.
    Adhvi.

    similar issue is disussed in the below thread...
    Info package Selection were hidden
    Info Package Selection Language key is not diplaying while this is checked
    search for any SAP Note which explains about data type RAW ....

  • To use two presentation variables based on the period selection in OBIEE

    Dear All,
    I have period prompt in my report, based on the period prompt selection in my report I need to get the start and end dates of the period and apply in the report filter.
    For e.g. Period Name selected in the prompt is "2010 - Q1" (For this Period, Period Start Date = 01/01/2010 and Period End Date is 30/03/2010, which is not going to be displayed in the prompts).
    How can I get the start and end dates of the period into my report filter. I tried using the presentation variable for the period name, but unable to resolve the requirement.
    Your help is highly appreciated.
    Best Regards,
    Rajesh

    Hi Rajesh,
    Create a report A which will give you the period start date and end date and filter it using the period prompt.
    Then filter the main report using the report A start date and end date, using Filter -> Advanced ->Filter based on results of another request .
    Add the report A in separate section on the dashboard along with main report and hide report A section.
    Thanks,
    Vino

  • The keyboard shortcuts on the pull down menus are grayed out. So I cant use my keyboard to (for instance) open up a new tab. This is the case for all keyboard s

    The keyboard shortcuts on the pull down menus are grayed out. So I cant use my keyboard to (for instance) open up a new tab. This is the case for all keyboard s

    Mine appear in gray, too; I think that's just the style.
    Does this problem occur on all pages? (If it only appears on YouTube or other pages with Flash players, it may be related to keystrokes being captured by the plugin.)
    A standard diagnostic for possible interference by add-ons is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    If your keyboard shortcuts work correctly, this points to one of your add-ons or custom settings as the problem.
    Any change?

  • Using the system variable cpInfoQuizAttempts

    My content is run through an LMS. I am trying to used advanced code using the system variable cpInfoQuizAttempts so that a caption appears when the variable value = 3. Apparently, I can't utilize the value of this variable; in fact, I can't even display it's value in a caption. I am trying to create advanced code on a course page that displays a caption like "You canot take this quiz again because you have already taken it the maximum number of time possible." once someone has taken the course the maximum number of times.  I assume this is the variable Captivate is using to show # attempts on the results page. I tried this with just a user variable but the value of the user variable is not stored or saved on the LMS. Therefore, if you have a maximum number of 3 attempts and someone takes the quiz twice, if he logs off and logs back on, the previous value (2) is not saved and the value reverts to the default (0).
    Any ideas how this could be done?
    KO

    I'm pretty sure that all user defined variables are saved in suspend_data in the LMS. Therefore your user defined variable should be there, but I don't see any way how Captivate would be able to retrieve it again out of the box.
    I think that the cpInfoQuizAttempts variable refers to attempts done in the same "session". So if fail the test and then retry and fail it would have a count of 2. However, once the user exists the course the variable is no longer available to Captivate.
    As Rick said most LMS' have a function to define max / min attempts of a quiz. However, this most likely requires that you publish the quiz as an independant SCO since the "lockout" would apply for that SCO. Basically if you only have one SCO then your users wouldn't be able to access the content or the quiz if they exceded the max attempts. Your content should therefore be one (or more) SCO(s) and your quiz one separate SCO.
    If I'm not mistaken it's also possible to define the max / min attempts in the SCORM manifest, but this is very geeky.
    If you own and can use Flash you could solve your problem two ways:
    1. Create a Flash file that retrieves the user defined variable from the LMS suspend_data and then sends that back into Captivate. Import the Flash file into your Captivate project.
    2. Create a Flash file that stores and retrieves the attempts in a Shared Object on the users PC and then brings the stored value back into Captivate. Import the Flash file into your Captivate project.
    /Michael
    Visit my Captivate blog with tips & tricks, tutorials and Widgets.

  • Can we use two costing variant for standard cost estimate

    Hi,
    Can we use two costing variant for standard cost estimate of two different materials in the same period ? e.g. Costing variant Z001 for Material code 1000 and Costing Variant Z002 for Material code 2000.
    Here the system is not allowing to change the costing variant in Marking Allowance (t code CK24) for marking and release of Material cost 2000 if the standard cost for Material code 1000 is already marked and released.
    Thanks,
    Bijay

    For a material in a period only one price can be released. Though you cn have two separate costing variants and then calculate standard estimate with that. U can release based on one variant only for a month. Or use MR21 and update the price as per the other variant
    Thanks and Regards

  • Can i use two iphone user for a single apple ID to download apps from iTunes?

    can i use two different iphone for a single apple ID to download apps from iTunes?

    You can use as many iPhones as you want, there is no limit to the number of devices that can sync to an iTunes account.

  • Calweek in Info package selection parameter

    Hi,
    I need to send the data from cube1 to another cube2 on weekly basis.
    Cube1 is getting the data on daily basis.
    on every week end i need to send the data to cube2 based on selection parameter OCALWEEK, and the load should be full update.
    i want automatic, so that every week end InfoPackage selection parameters should change to next calweek so that it will fetch correct lastweek data to cube 2 from cube.
    Can you please suggest me how to automate the Info package.
    Regards,
    Silpa

    Hi,
    at infopacks selection screen, for field 0calweek select type : abap routine.
    in routine use function mod DATE_GET_WEEK to retrive the week based on sy_datum (current date), reduce the result -1 and the result will be calweek minus  1, e.g.: 200725 for today.
    /manfred

  • Language key in info-package selection

    Hi,
    Just wondering on the language key selection in the info-package. This topic was raised a number of times in the forum and what i have found is no matter what you do 'Language Key' will not appear in the info-package selction as its a srevice API feature and BW will automatically assign the language key based on the installed languages.
    If i need to filter out on any particular language then i need to use some formula / routines etc (of course this is the last option).
    Is my understanding correct ? or Do we have some workarounds to make the language key available in the info-package ?
    Points will be assigned to value added answers.
    Thanks,
    Soumya

    Hi Soumya,
    Hope you would have checked these:
    1. Datasource for text is lang-dependent. If not make it lang-dependant.
    Also check:
    look in OSS Note 324684 'Selections for language and time-dependence'...
    "If a field of a DataSource - typically with field name 'LANGU' or 'SPRAS' - is assigned to InfoObject '0langu', the field is not provided in the selection fields although the field actually can be selected. In this case, all languages of the language vector active in the BW System are requested by the source system but the language selection cannot be defined in the Scheduler.
    Check for more details:
    Re: Infopackage Language Selection
    Bye
    Dinesh

  • Info Package Selection Language key is not diplaying while this is checked

    Hi
    i am facing an issue in BI 7.0
    in Info Package Data Selection Tab "Language key field" is not diplaying while this field is checked as a Selection option in R3 Data source.
    How can i put Language key field in Info package data selection
    Regards
    Atul
    Edited by: AtulMohan Mishra on Apr 28, 2011 11:50 AM
    Edited by: AtulMohan Mishra on Apr 28, 2011 11:50 AM

    Hi,
      Please see OSS note 1033537 .Even if langauge selection is available in infopackage it wont work .Tthe only way to restrict a particular language is in DTP or in transformation routine. Infopackage will extract all the language that is installed in BW system and you have to place your restriction in DTP or transformation.
    Regards,
    Raghavendra.
    Edited by: Raghavendra Padmanaban on Apr 28, 2011 9:18 AM

  • How to use a global variable for reading a query resultset in JDBC lookup?

    Hi Friends,
    Using JDBC lookup, I am trying to read from a table Emp1 using a user defined function. In PI 7.0, this function returns values of a single column only even if you fire a " Select * " query. I am planning to use a global variable(array) that stores individual column values of the records returned by a "select *" query. Need pointers on as to how a global variable can be declared and used to acheive the above scenario. Kindly explain with an example. Any help would be appreciated.
    Thanks,
    Amit.

    Hi Amit,
    Sounds like a good idea but then you would need an external db and update the table in a thread safe way !.
    Regarding your question as to how to work with global variable please refer https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1352. [original link is broken] [original link is broken] [original link is broken]
    Rgds
    joel

  • Using Standard Text Variables for FYPERIOD in Report Title ?

    Hi,
    We have a requirement where the user input the variable 0fiscper to the query (001.2010). How to get the text value of that variable in the query description in the bex query ?
    For example user input, 008.2010. We need to get "Aug 2010 Sales values " where Sales values will be the report text. I want to get Aug (month) and year (2010) before the report title. I have searched in google and sdn and could not find any link, but found a doc for the column header text using the same variable. I have tried the same procedure and its just display the zvariable name and Sales value's instead of the label. Please advise.
    Thanks
    DR

    You can create a Text variable with replacement path of Fiscper as reference char. Select Key in details tab of replacing variable.
    If you are just getting technical name, then it is understood that it is not getting replaced.

  • Use of Shared Variables for data transfer from a RT traget to a desktop application

    Hi,
    I want to adopt the shared variables to share data in an existing distributed application comparable with the T3 Benchmark configuration in this document:
    [1] http://zone.ni.com/devzone/conceptd.nsf/webmain/5B4C3CC1B2AD10BA862570F2007569EF
    The current implementation uses a well tuned solution with RT FIFOs and TCP/IP communication with a desktop-PC which monitors and stores the data.
    The desktop application runs with a much slower execution rate than the TCL. So the TCP/IP packets are used to buffer the data with a package size dependent on the data send rate.
    To use the shared variables instead of this RT FIFO + TCP/IP implementation I need to read the shared vairable buffer at once each time the desktop application reads the shared variable.
    But according to this quotation from [1]:
    "With buffering, you can account for temporary fluctuations between read/write rates of a variable. Readers that occasionally read a variable slower than the writer can miss some updates."
    this seems to be impossible. Am I right?
    Are there any suggestions to circumvent this problem? Or are shared variables not made to share data between unsynchronized processes without data loss?
    Regards Till

    You can use the error-cluster to detect the end of your queue. The erroroutput of the shared variable will return a -2220 Warning, if it reads a value it has read already before. I attached a modified example and saved it for 8.2 I hope you can open it.
    Attachments:
    readbuffered82.zip ‏51 KB

  • How to use one Bex Variable for two purposes in one query?

    Hi,
    I want to prompt for a UOM in a query. Then I want to use that one UOM variable to do 2 tasks in the query:
    1. Perform a UOM conversion on one restricted key figure (no filtering)
    2. Filter in a second restricted key figure (no conversion)
    How would I use a variable (or two?) to do this? I do not want to have 2 UOM prompts.
    Thanks!
    Gregg

    Oh, it all seems so easy now!  Hindsight 20-20...
    Solution was to create a new input ready variable for Unit.
    1. Restrict the key figures which need restricting using new variable
    2. For conversions, in BI backend us T-code RSUOM and create new conversion type associated with new variable. Then for each key figure needing conversion, set the conversion parameter to use the new conversion type.
    Between both 1 & 2 above, the same variable is used & thus prompted only once.
    Solution works perfectly.... as it should. Hope this helps someone else!

  • Can we use two costing variants for standards cost estimate release.

    Hi,
    We have 2 plants (plant 5100 and plant 5200) under company code 5000.
    We have run standard cost estimate(CK11N) for material 98001000027 at plant 5100 using costing variant ZG01 and at plant 5200 using costing variant ZG02. First, we released  standard cost estimate (CK24) for this materia at plant 5100 and set (in marking allowance) costing variant ZG01 and costing version 01. Next time when we are trying to release the standard cost estimate for the same material for plant 5200, it is automatically picking ZG01 as costing variant in marking allowance and it is not allowing to change the costing variant to ZG02 saying Company code 5000: Release already carried out, cancellation not possible, Message no. CK797.
    Is it possible to use two different costing variants for release of standard cost estimate for a material at two different plants at the same company code? If so how?
    Please suggest.
    Thanks,
    Bijay

    Hi,
    Thanks for your reply again.
    What is the benefit of assigning "Single Valuation Variant same to different Plants" ? In costing variant also we can assign maximum only one valuation variant and this valuation variant will default for all the plants, and hence I dont think it is necessary to assign same valuation variant to different plants.
    My  issue is :
    Example: ( Standard Cost Estimate for material 98001000027)
    Plant - 1
    Material Cost                                             Rs.100
    Labour Cost                                               Rs.50
    Overheads (10% of Labour Cost)                  Rs.5
    (say ,through costing sheet - 1)
    Total Standard Cost Estimate                      Rs.155
    Plant - 2
    Material Cost                                             Rs.150
    Labour Cost                                               Rs.100
    Overheads (20% of Labour Cost)                  Rs.20
    (say, through costing sheet - 2)
    Total Standard Cost Estimate                      Rs.270
    Now, Please explain why we cannot have two Standard Cost Estimates for a material at two different plants? If it is possible to have two standard cost estimates for a material at two different plants, how to take care of  overheads (rate of which varies) at two different plants (plant - 1 > 10% and plant- 2>20%) as we can assign maximum one costing sheet to a valuation variant variant?
    How to map the system so as to meet the above requirement?
    Thanks,
    Bijay

Maybe you are looking for