BW 3.5 Fact table with data no corresponding records on P table

Hi Gurus,
I have a weird situation: There is an BW 3.5 SP 16 (I know itu2019s oldu2026) infocube that receive 400,000 records every single day.
They never compressed (at least there is no data on E table), instead they ran a program calling FM u201CRSDRD_SEL_DELETION'u201D every day that takes about 5 hours to run (when it runs without errors).
So I checked Fact table and found 337,564,988 records. If you check the number of records on Infocube Admin it shows 14,018,370 record. I found that the u201Cmissingu201D record are not on P table (there is data on Fact pointing to missing Packages).
I think the Selective deletion messed up the infocube. These record that are missing on P table have to be deleted. I ran an RSRV check on this Infocube on Background and it canceledu2026
So, I want to delete this data from Fact my question is: How to do that with minimum effort without invalidade the information?
Of course I will backup the data to a temp cubeu2026
Well any idea is welcome
Regards,
Alex

Hi Navesh,
First of all thanks to your quick answer.
Well, the arguments of FM are set to del any 0SEM_CRDATE older than 30 days in the past. This characteristic receive SY-DATUM on Act. Rule (transformationu2026) so every package older than 30 days have to be deleted. The weird thing is that it is deleting the P table record and keeping the data on F table.
So You think it would be a nice try to do an selective deletion with the same criteria manually?
This is the code, can you (or someone) take a look?
START-OF-SELECTION.
*Cria Range do período a ser eliminado
PERFORM f_range.
PERFORM f_elima_cubo.
END-OF-SELECTION.
*&      Form F_RANGE
FORM f_range.
v_data_inic = sy-datum - 31.
v_range-sign   = 'I'.
v_range-option = 'LT'.
v_range-low    = v_data_inic.
v_range-keyfl = 'X'.
APPEND v_range TO t_tab_main-t_range.
t_tab_main-iobjnm        = '0SEM_CRDATE'.
INSERT t_tab_main INTO TABLE t_thx_sel.
ENDFORM.                    " F_RANGE
*&      Form F_ELIMA_CUBO
FORM f_elima_cubo.
v_parallel               = '01'.
CALL FUNCTION 'RSDRD_SEL_DELETION'
    EXPORTING
      i_datatarget      = 'IC_LP_B01'
      i_thx_sel         = t_thx_sel
      i_authority_check = c_flag
      i_no_logging      = v_nl
      i_parallel_degree = v_parallel
      i_show_report     = v_sr
    CHANGING
      c_t_msg           = t_msg.
ENDFORM.
Regards,
Alex

Similar Messages

Table - populate one table with data from the list of another table

Hello All,
I am a newbie in Swing and am a book and few tutorials old.
I am trying to achieve the following:
(1) I populate Table1 (a JTable) with a list of data - each row consists of several columns. And I have a Table2 (also JTable) that is in the beginning empty.
Both the tables (Table1 and Table2) are showed in the window.
(2) Lets say, there's a button (JButton) in between the two tables.
Now if I Select a row from Table1 and press the button, this row will be sent/copied to Table2.
And this way I can choose different rows and pass the data to Table2.
I have manages to make Table1 and put data in it ... but for the rest, I don't know where and how to begin.
Would appreciate some ideas and tips.
Thank you.

Since you are using a button to start the copy process you don't need to worry about a ListSelectionListener or a MouseListener. You need to create a button with an ActionListener that does the following:
a) Create an Array based on the size of the number of columns in the table
b) get the index of the selected row
c) populate the Array with data from the TableModel by using the table.getModel().getValueAt(...) method for each
d) Now you can add the row of data to the other JTable by updating its model.
DefaultTableModel model2 = (DefaultTableModel)table2.getMode();
model.addRow( theArray );

Partitioning an Existing Table with data

Hi All,
I am few tables with data, I need to Partition the table without affecting existing table values is it possible?.
if yes then Please suggest me some ideas to archive that..
Thanks & Regards
Sami

Hi All,
I Need to partition for existing table with 1 million records
1. First partition should be created for 6 months
2.Second partition should created for 1 year.
3.So as of now we have 6 months Data in production + another 6 months data in First partition + another 1 year data in Second partition.
4.More than 2 year’s data’s should be moved other partition or archived.
kindly provide your valuabe suggestion.
Thanks & Regards
Sami

Using expdp to export a mix of tables with data and tables without data

Hi,
I would like to create a .dmp file using expdp, exporting a set of tables with data and another set without data. Is there a way to do this in a single .dmp file? For example, I want all the tables in a schema with data, but for the fact tables in that schema, I only want the fact table objects, not the data. I thought it might be easier to create two separate .dmp files, one for each scenario, but would be nice to have one .dmp file that satisfies my requirement. Any help is appreciated.
Thanks,
-Rodolfo
Edited by: user6902559 on May 11, 2010 12:05 PM

You could do this with where clauses. Let's say you have 10 tables to export, 5 with data and 5 without data. I would do it like this
tab1_w_data
tab2_w_data
tab3_w_data
tab4_w_data
tab5_w_data
tab1_wo_data
tab2_wo_data
tab3_wo_data
tab4_wo_data
tab5_wo_data
I would make one generic query
query="where rownum = 0"
and I would make 5 specific queries
query=tab1_w_data:"where rownum > 0"
query=tab2_w_data:"where rownum > 0"
query=tab3_w_data:"where rownum > 0"
query=tab4_w_data:"where rownum > 0"
query=tab5_w_data:"where rownum > 0"
The first query will be applied to all tables that don't have their own specific query and it will export no rows, the next 5 will apply to each of the corresponding table.
Dean

Help on export sybase iq tables with data and import in another database ?

Help on export Sybase iq 16 tables with data and import into another database ?

Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb.

How to move tables with data from one client to another

Hello friends
I have 2 clients 001 and 002.
I have created a table with lots of data on client 001.
I have to get the same table on 002 also with the same data.
Is there an easier way of transfering this data from one table to another?
I would appreciate any feedback on this.
I know that mappings etc., can be done using the export and import of tpz file. So I want to know if there is any similar thing to transfer a table with data.
THanks
Ram

hi
thanks for the response
We are working on a sandbox system for demo purpose.
Actually we have two different group of people using two different clients created on the same server.
Our group is using client 001 and another group is using client 002.
We don't want the changes that one group does to the table to affect the other.
Our group has created a z-table and have entered considerable amount of data.
However, the other group also need to create the same table with the same data.
So to avoid double work, we were trying to see if there is a way to copy the table with data created on 001 to 002.
Any suggestions / feedback will be greatly appreciated.
Thanks
Ram

Moving tables with data from one client to another

Hello friends
I have 2 clients 001 and 002.
I have created a table with lots of data on client 001.
I have to get the same table on 002 also with the same data.
Is there an easier way of transfering this data from one table to another?
I would appreciate any feedback on this.
I know that mappings etc., can be done using the export and import of tpz file. So I want to know if there is any similar thing to transfer a table with data.
THanks
Ram

If you do not have the client field in your table, then the table is cross-client.
IF you have the client field filled with 001, then you need to create the same entries with client 002, I dont think that you can do this with a transport.
You have to write an ABAP that reads and writes the data.

How to pass internal table with data in ABAP OO

Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
Claire

I have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot.

Rename the existing table with date suffix

Hi,
I'm trying to rename a table with date suffix at the end of the table name, and drop the date suffix table which is greater than 7 days. for that I have the below sql, I have not included the drop syntax in this.
I'm not able to rename with the date suffix in the below sql, syntax error at '+'
DECLARE
@TPartitionDate date
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'IIS_4')
BEGIN
SELECT
@TPartitionDate = MAX(PartitionDate)
FROM PartitionLog (NOLOCK)
EXEC sp_rename 'IIS_4','IIS_4_'+ @TPartitionDate
END

create table Test(sno int)
DECLARE
@TPartitionDate date = getdate()
declare @a varchar(200)
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'Test')
BEGIN
select @a='TEST_'+ cast(@TPartitionDate as varchar(10))
EXEC sp_rename 'TEST',@a
END
drop table [test_2015-04-23]
Hope it Helps!!

Trying to populate a table with data from WebRowset

Hi,
I want to be able to populate my tables with data from WebRowsets that have been saved to files. Everything goes good until I get to acceptChanges(). At which point I get a NullPointerException.
Here's the code...
WebRowSet wrs = new WebRowSetImpl();
FileReader reader = new FileReader(inputFile);
wrs.readXml(reader);
wrs.beforeFirst();
CachedRowSet crs = new CachedRowSetImpl();
crs.setSyncProvider("com.sun.rowset.providers.RIXMLProvider");
crs.populate(wrs);
crs.beforeFirst();
crs.acceptChanges(con);
Results in...
java.lang.NullPointerException
at com.sun.rowset.CachedRowSetImpl.acceptChanges(CachedRowSetImpl.java:867)
at com.sun.rowset.CachedRowSetImpl.acceptChanges(CachedRowSetImpl.java:919)
I'm using Java 1.5_02. I looked at the source code for CachedRowSetImpl, and the only thing I could think of is that maybe "provider.getRowSetWriter()" in the following snippet is returning null....
public void setSyncProvider(String s)
throws SQLException
provider = SyncFactory.getInstance(s);
rowSetReader = provider.getRowSetReader();
rowSetWriter = (TransactionalWriter)provider.getRowSetWriter();
Any ideas?? Thanks!

I have the same problem after setting com.sun.rowset.providers.RIXMLProvider.
Looks like a bug to me.
By the way, why are you creating a new CachedRowSet and populate it with a WebRowset (which extends CachedRowSet)?

What is the best wayt to copy tables with data from development to Prod?

Dear all,
We have Oracle tables with data in a development server, I would like to know if there is any ‘easy’ and ‘direct’ way to copy them to the production server.
As I think import and export would be the best way. Any other althernatives?
Thanks.

There are a number of methods you could use.
<ul><li>
Export and import would work or their 10g+ equivalents data pump. </li>
<li>You could create a database link between the 2 databases and use SQL*Plus copy to transfer data on a table by table basis (probably quite laborious unless there's only a few tables). </li>
<li>You could use transportable tablespaces (there are some restirctions - check the documentation http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/tspaces013.htm#sthref1632) </li>
<li>You could use RMAN to clone the development database (assuming the prod database hasn't been used yet and that there's nothing in it you need to keep).</li>
<li>You could create the prod database as a standby copy of the dev database </li>
</ul>
Using transportable tablespaces would be much faster than using data pump or import/export depending on how much data there is.

Fill a table with data coming from an RFC

Hello everyone:
I've followed the Weblog "How many lines of java code did i write for a simple Web Dynpro?"
/people/durairaj.athavanraja/blog/2004/10/17/how-many-lines-of-java-code-did-i-write-for-a-simple-web-dynpro
I've called an RFC and created a table with data coming from it (which is also a table). My question is, if in this table there's a field named "UserType" there are two possible values for this field:
"userA"
"userB"
How can I get the table only show me the "userA" registers? The RFC does return all of the users, but when filling the table, can I put an if-else somewhere on my code?
Thanks a lot
Alejandro

Hi Alejandro,
Referring to the link provided "The logic of the filter process is not implemented in Web Dynpro. The application developer must implement the action to be executed."
We would have to implement the action onFilter in the controller implementation. Ideally, we fill the data retrieved from backend into a List (java.util.List) (this could be done on init of view) and then subset the list after meeting the criteria in the action handler(say
onActionFilterData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent).
Having done this, you may bind the output list back to the node (shown in table)
Regards,
Chaitanya

How to Copy complete structure of a table with data from one database table to another databse table

I need a sql query to copy structure of table with data from production table of ONLINEBTREKDB database to production table of Archive database.
I tried this query
select * into Archive.dbo.Production from ONLINEBTREKDB.dbo.Production p
but problem is I am able to copy the table schema and data but not able to copy constraints(PK)
Any Help?
seema

You've multiple options
1. Use generate scripts wizard available in SQL management studio. This is particularly helpful when you want to script out lot of objects. You can also choose to script data as well inside this. This can be launched by right clicking the db, choosing tasks
-> generate scripts and then selecting required options inside the wizard
2. Use object explorer and right click and script out table. You can also use search functionality to find object you want inside object explorer
http://visakhm.blogspot.in/2013/02/object-filtering-using-ssms-object.html
3. Use query based on INFORMATION_SCHEMA views like TABLES,COLUMNS,CONSTRAINT_COLUMN_USAGE etc to generate the script
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Transfer a table with data from 1 client to another client

Hi experts please focus on this issue. what is table maintainance generator? what is the main advantages of it.
how can we transfer a table with data from 1 client to another client.
Thanks in advance
vamsi.

Table maintenance generator can be generated via se11 on your table.
The advantage is that the table can manaully be updated via SM30.
If you want to transport to another client the table content, I think you can :
- Generate a transport request in SM30 ( Transport button)
- use SCC1 to transport from a client to another.
Regards,
Erwan

How to transport/move a table with data from development to Test to Production

Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
Sri

Hi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek

BW 3.5 Fact table with data no corresponding records on P table

Similar Messages

Maybe you are looking for