BW 3.5 SP13 with Business Content 3.53 SP4

Hi experts!
I have a BW system with the following configuration: BW 3.5 SP13 with Business Content 3.53 SP4.
To install the xApp Analytics 1.1, I need at least the following configuration: BW 3.5 SP14 Business Content 3.5.3 SP6
Which features I will lose if i decide to install xApp Analytics 1.1 in the BW I have? Am I going to lose queries, cubes and etc that come bundled within the xApp Analytics 1.1 Business Packages?
Thanks a lot.

Thanks Stratos...
for reference...
SAP GUI
    u2022   SAP 640 GUI, patch level 25
    u2022   SAP 710 GUI patch level 6
    u2022   SAP Java Connector 2.1.8
SAP Servers
   u2022    SAP BW 3.5, BASIS level 20, ABA level 20, BW level 20
   u2022    SAP R/3 4.6c, BASIS level 41, ABA level 41
   u2022    SAP R/3 4.7, BASIS level 41, ABA level 41
   u2022    SAP NetWeaver BI 7.0, BASIS level 14, ABA level 14, BW level 14
   u2022    SAP NetWeaver BI 7.02, BASIS level 0, ABA level 0, BW level 0
   u2022    mySAP ERP 2004, BASIS level 19, ABA level 19, BW 3.5 level 19
   u2022    mySAP ERP 2005, BASIS level 14, ABA level 14, BI7 level 14
   u2022    SAP Enterprise Portal 6 SP19
   u2022    SAP Enterprise Portal 7 SP10
SAP servers required to have at least the above patch levels.
Note: The following correction notes should be applied to your SAP BW / SAP Netweaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048.
OSS Correction Note 1007048 requires a manual configuration step.
Thanks
Sathya

Similar Messages

Help with Business Contents 7.0

hello everyone,i need help with this question if i want to install a business content cube ok but i want bi 7.0 way how can i do that? either let me know or point me to a link. i tried to search by different keywords but i couldnot find anything. thanks.

Hello,
I am New to BI myself, please correct me if im wrong, but i thought that after you replicate metadata on the sap system it will prompt you to pick if you want to create it as 7.0 RSDS, or keep it as 3.x isfs, also an option to creaate one of each. Please let me know if this helped out so I know if im on the right track.
Thanks,
Niraj

Source System not collected with business content Activation

I'm trying to activate some business content and have previously assign the source system (R/3). When I'm selecting an infosource and select as grouping in data flow before the source system is not collected.
This is a new BW 3.5 connected to a ECC. It has to be silly but I don't know what else to check. I was surprise to see that the source system was created with the icon of a BW system. But I think that this is just because the ECC appart of being an R/3 system is also a BW instance.
Well, any help appreciated and kindly rewarded.
Thanks,
Alberto Sabate

Thanks but,
I have tryed multiple times activating my infosources selecting only one source system, all of the available or none at all. No matter what I do the system collects only the Infosource with the communication structure but does not go down to the transfer rules and assignment of the available datasource.
I don't know what to do now. I'm obviously selecting the grouping with "in data flow before".
I'm running out of ideas.
Thanks all,
Alberto Sabate

Problem with Business Content install in ECC5 IDES

Hi,
I am having tough time installing business content.
After installing ECC5 IDES, I am trying to install Business Content in BW ( Client 800).
In SBIW, (under Business Content DataSources), I did Transfer Application Component Hierarchy.
Then I transfered few DataSiurces ( 0MATERIAL_ATTR)
Then in BW, I did "Replicate Data Sources". I see all the Datasources in "Data Source Overview"
But When I try to install Business Conetent ( rsa1>> Business Content >> Select Object Types >> InfoObjects>> Select Objects>> Double click ), I couldn't find any InfoObjects from source system. I tried the same for InfoCubes as well..
Am I missing anything?? I appreciate your help.
Thanks
Samba

ECC will have content for 'source system' ie datasource and extractors. On your BW system you need to have the business content add on available before you can see such objects there (infoobjects, cubes).
BW system (whether in the same IDES or another system) needs to have this BW Content add-on. It is one additional step, just having the BW system (without this addon) will not give you what you are looking for.
BW content add-on is typically one set of transport files, installed using SAINT transaction. My guess is your system doesn't have it.

Install query with business content - missing objects

Hi All,
I am trying to install a query for the purchasing data cube - 'Values: Purchase order - delivery - invoice'. When I try to install I get an error message that one of the directory objects is missing (Restricted figure - Invoice Value. Please help with the process on how to install the missing object.
Kind regards,
Cheryl Adamonis

Hi Cheryl,
You can change the collection mode to automatic and the grouping to in data flow before. This should give you all the needed CKF, RKF etc. But please be aware that this collects info objects, providers and all other objects in the data flow before the query!
Alternatively you can just choose the RKF from the query elements and install this with your query (search for the technical name given in the error). You might as well install all the other RKF's for the info provider when you are doing this. You can do a search on the info provider name and see all the available RKF's (E.g. 0PUR_C01).
BR
Stefan

WebElements 2.46 with business Objects XI3.1 SP4?

Hi Guys,
We recently upgraded our Business Objects XI 3.1 SP2 FP2.8 to Business Objects XI 3.1 SP4. When we try to view WebElements Report via CR2008 or via Infoview it basically shows just the HTML code behind that report. We followed the WebElements 2.46 guide to configure the BusinessObjects Enterprise server to allow pass-through HTML but it's still the same.
Just wondering if anyone out there is running WebElements on Business Objects XI 3.1 SP4? Or if anyone has a similar issue?
Any help is appreciated.
Thanks,
Adnan

hi Adrian,
there were some issues with webelements in the latest service pack of xi 3. this was due to changes in the xi 3 dhtml viewer.
if you've got a test bed with the latest version up still, please try the latest version of webelements [here|Crystal Reports webElements]. that version is .247 and has been tested on xi 3 (latest service pack) and bi 4.0.
the 246 version will not work on bi 4.0. we have no customer feedback for webelements on bi 4.0 as this will be the first release for 4.0. there were recent changes in a fix pack of bi 4.0 which delayed the release of webelements by quite a bit...sorry for that.
there are also a couple of new functions in 247 too.
i hope this helps,
jamie

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

Business Content not Loaded?

Hi Folks,
Is it possible that during a BI install certain business content does not get loaded into the system? Is there a way to reload missing business content. The problem I have is as follows:
When activating business content cube 0CRM_C08 with data flow after I get an error while collecting business content. The error is
"Object 0PH_C01 (InfoCube,CUBE) could not be collected for object 8GKZ2KVI3EB2XK75QSDO85Q4Z (Query,ELEM)"
Now when I go to take a look at the available cubes in the meta data repository 0PH_C01 does not exist.
Anyone else have similar issues with business content not being loaded in the system? I find that I have this problem in both our BI7.0 system and our BI 7.0 IDES system
Thanks.

HI
I have checked in my system also. 0CRM_C08 This InfoCube contains date about the CRM activity items. It is based on the Activity Items ODS object (technical name: 0CRM_ACTI).
As you mentioned like that The cube is not based on the another cube(0PH_C01). And it is not available in Metadata Repository also.
May be you are looking in wrong way. Please check it once again.
Any furhter questions are there please let me know.
Thanks & Regards,
Nagaraju.V

Business content installation problem

Hello
When I am trying to install SD cubes through with Business content with the setting of data flow before and after , I am getting the Transfer rules .....basically I am looking for data flow in BI7 , like Transformation and DTP ? , how I will be able to install whole dataflow in BI7 method .
I am in BI7.
Regards,

Hi Akshay,
In BI7 we don't have standard Transformation(BC) so we have to install transfer rules and update rules then try to migrate 3.x to 7.0 data source after that you can create transformation manually,
Its better to install BC with grouping only necessary object coz when you select grouping after or before it will search whether you have authorization to activate ds in source system r not then if you don't have authorization you may get errors.
Then migrate the 3.x data source to bi7 data source by using rsds tcode.
Refer sapnote_0001052648 for migration
Regards
Vivek

Business Content Best Practice

How do we go about evaluating Business Content for a project? Any tips/tricks/best practice used when dealing with Business Content?
What are the dos and don't of Business Content?

Hi Greg:
To access the Best Practices using Business Content do the following:
1.-Open this URL: http://help.sap.com/bp_bw370/html/index.htm
2.-Click on the "Preconfigured Scenarios" link.
3.-Click on the Links to navigate on the different available scenarios and to see the documents you can download (Scenario Documentation, Scenario Installation Guide and Building Blocks).
*Financials
-- Financial Accounting Analysis
-- Controlling Analysis
-- CO-PA Analysis
-- Cost Center Planning
-- Reporting Financials EhP3
*Customer Relationship Management
-- Sales Analysis
-- Cross-Functional Analysis: Financial and Sales Data
-- Booking Billing Backlog Analysis
-- Sales Planning
-- Scheduling Agreements Analysis
-- CRM Analytics
*Supply Chain Management
-- Purchasing Analysis
-- Manufacturing Analysis
-- Inventory Analysis
-- Demand Planning Analysis
-- Resource and Operation Data Analysis
*Product Lifecycle Management
-- Project System - Controlling and Dates
*Human Capital Management
-- Cross-Application Time Sheet
-- Time Management - Time and Labor
-- Personnel Development - Qualifications
-- Travel Management - Travel Expenses
*General
-- Data Mining - ABC Classification
Regards,
Francisco Milán.

Installation of Datasource from Business content

Hi Friends,
While Installing Datasource from Business content in SAP R/3 encounter with following error message. Can some one guide me how to transfer the hierarchy with Business Content. Appreciate your help in resolving this problem.
Application component FI-GL of DataSource 0FI_TX_4 does not exist
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component FI-GL. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Procedure
You do not have the option yet to transfer the application component hierarchy from the Content.
You transfer the hierarchy with Business Content.
Thanks & Best regards
Pravin

Sorry if a year has gone by.
This is because you didn't heve the Application Component Hierarchy installed in BW itself. Use rsa6 to do this, in the BW system (not the other source system. Be careful if you have already somehting there, because it will override the hierarchy with the Business Content hierarchy.
If you need to transport the active hierarchy, and not reinstall all the Business Content Datasources, the object is :
R3TR DSAA APCO_MERGED
So, create a workbench transport, and add the above object.

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

How to insert business content in BI7

Hi expert:
           How to insert business content in BI7?I have some example(BW3.0) to follow . It tells me to active '0plant' in TC 'RSA5' and 'RSA6', but I cant find it.
Allen

hi Bhanu:
      thanks! And I have another questions to ask.
      1.Why it tell me 'Application component LO-IO of DataSource 0PLANT_ATTR does not exist'?
      2.how to 'atransfer the hierarchy with Business Content'?
      3.What does 'content delta' use?
     Could u explain it to me particularly?
Allen
BR

Business content extraction

hello gurus
i have a problem with business content extractor 0fi_gl_10. i have activated the extractor and trasfered. and then build a cube and transfered the data. now requirement is like that i have to append the structure and extract those feilds data to cube. i appended the structure in rsa6 and in extract structure i can see the data of those two feilds where as i couldn't see the feilds in my trasfer structure. may i know where i went wrong. ( i replicated the data source in bw source system still i can't see the feilds) may i know what is the problem how to approch .

Hello Rad,
Sorry, but have you transferred the field from the right hand side to left hand side in the datasource/transfer structure tab in the infosource & and also added it in the communication structure.
then you need to go ahead and maintain the transfer rules in the transfer rules tab.
Please let us know.
Hope it helps..
thanks,

Business content for FI-SL

Is there any business conent object for FI-SL in BI side ( I mean cube, DSO, or queries, etc) ?
We are going to implement FI-SL. The only thing I can find is that I have to generate the data source by myself. I don't find anything at BI side. Is there any sample queries, cubes ?

Hi ,
FI-SL DataSources cannot be delivered by SAP with BW Business Content for non-standard ledgers,
because the ledgers and their FI-SL totals tables may link to user-defined fields and structures.
All other FI DataSources (FI-GL, FI-AR, FI-AP) are delivered with Business Content.
To provide an FI special ledger DataSource for BW, an extract structure (=transfer structure) must be
generated for the FI-SL totals table in question. You then have to define the DataSource for the totals
table ledger.
Check this link:
http://help.sap.com/saphelp_bw32/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
Hope it helps,
Regards,
Supriya

BW 3.5 SP13 with Business Content 3.53 SP4

Similar Messages

Maybe you are looking for