BW 3.5 Upgrade approx 20Days to do?

I would like some input into estimates of effort to upgrade our 3.1 to 3.5.
I have been following some threads and it seems that the upgrade,if you follow the SAP instructions and are well prepared, seems straight forward.
I have reviewed the 'How to.....SAP BW 3.5..." document.
It seems quite explicit in its steps and information.
Are there any other major steps  that I am missing. If its approx 20 days to do then that is what it is, I am just a bit perplexed. We want to move on with the upgrade and its the scheduling of the upgrade window is my concern if it is the above amount of time. We may well have to put-off for 6 months.
We only have one application running in SEM - BPS.
These estimates are provided by one of our partner
                     BW Consultant          Basis Person
Preparation                2                     3
Blueprint                                        3
Review SEM/BPS objects     2
& processes
Install Upgrade Software                         1
for 3.5                                          1
Install latest Patch       1                     1
levels for BW (SP-Stacks)
& OSS Notes
Install Plugin                                   1
Review Technical Mods &
action changes             3                     2
<b>Total                      8                    10</b>
Message was edited by: Frank Kennedy

Frank,
The document would give you an idea as to what all needs to be done. But you also need to look ata
1. Volume of data / number of cubes / ODS to be migrated into 3.5
2. You will also have to do the same to your DEV , QAS and PRD systems in order to continue from this point onwards with BW 3.5
3. You should also look at testing the entire setup post upgradation. Please ask your application consultant if they have budgeted for this and have made a correct estimate of the volumes and different systems.
I am not saying that 20 days is too short but I think testing has been left out and validation.
You would have to find out all reports / Graphs etc etc and then look at migration and then also look at any new expectations - since there might be enhancements with the feeling that - ' Anyway we are upgrading - let us get these reports also done in the process' This thought will increase the scope and increase the timelines.
Arun

Similar Messages

  • Problems and "undocumented features"

    We will be upgrading approx. 30 users from Contribute V2 to
    Contribute V4. We plan to eventually do a mass upgrade, starting
    with the Admin accounts.
    Q1. Is it possible to install a single, non-admin account
    instance of C4 while leaving everyone else as C2?
    Q2. What items/challes should we be aware of related to this
    upgrade?

    Mpolha wrote:
    > We will be upgrading approx. 30 users from Contribute V2
    to Contribute V4. We
    > plan to eventually do a mass upgrade, starting with the
    Admin accounts.
    > Q1. Is it possible to install a single, non-admin
    account instance of C4 while
    > leaving everyone else as C2?
    > Q2. What items/challes should we be aware of related to
    this upgrade?
    >
    Hi
    Contribute V2 is not compatibile with Contribute V4. i.e.,
    Either you
    need to migrate all your users to V4 (very much suggestable)
    or Keep all
    of them on V2.
    I was looking at Contribute V2 yesterday and comparing
    against V4.
    I would say V2 is like Windows 98 and V4 is like Win XP /
    Vista as a
    small correlation
    Thanks
    ARun

  • I want to upgrade my mac os 10.6.8 to 10.8.2 , will this erase all my files,apps,etc ? and will i loose the licence of microsoft office 2011, how to make a backup on a pendrive ?  I have files of approx 180 gb , THANK YOU

    I want to upgrade my mac os 10.6.8 to 10.8.2 , will this erase all my files,apps,etc ? and will i loose the licence of microsoft office 2011, how to make a backup on a pendrive ?  I have files of approx 180 gb , THANK YOU !!

    Forget the Pendrive stategy...
    Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
    By far the easiest way to make such a Backup, is to use something like
    SuperDuper  http://www.shirt-pocket.com/
    or CCC  http://www.bombich.com/
    That way, should anything untoward happen during the Upgrade,
    you will NOT LOSE ANYTHING.
    (Get an EHD that is at least equal to your current Drive...)
    Also, Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com

  • What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What has happened to the iPad 2 finger select and drag technique?
    Since upgrading to iOS7 it does not work?
    I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
    Please submit your feature request to Apple at this link: http://www.apple.com/feedback

  • I have just upgraded to os x lion 10.7.4 and I seem to have lost approx 4000 photos from iPhoto.  Is there a way to recover these photos?

    I have just upgraded to os x lion 10.7.4 and I seem to have lost approx 4000 photos from iPhoto.  Is there a way to recover these photos?

    The Lion upgrade does not touch iPhoto. However, you may need to purchase an iPhoto upgrade.
    Look in your /Home/Pictures/ folder for the iPhoto Library file.

  • I started downloading free maverics upgrade,currently paused,how do I stop download. I have mac os x 10.6.8. Downloaded approx.4 to 5 min.I started downloading free maverics upgrade,currently paused,how do I stop download. I have mac os x 1

    I started downloading free maverics upgrade,currently paused,how do I stop download. I have mac os x 10.6.8. Downloaded approx.4 to 5 min.

    Anything in the Dock or Launchpad?
    If it is still downloading, try a restart.

  • After upgrade to 10.8.1, Internet access stops after approx. 50MB of traffic.

    I upgraded to Mountain Lion, and when I started upgrading OS components and other apps, downloads would stop after about 50MB. Once this happens, all requests in internet browsers also lost internet access. If I turn Airport off and then on again, I can access the internet but the same problem occurs again once I continue other downloads.
    I have other computers and they don't suffer from this problem, so I know if is not my internet provider or my wireless network.
    Any ideas?

    Me too! I'm also getting display problems in emails where scrambled graphics are overlaid interactive parts of emails like dates telephone numbers!

  • Is there a cd drive that can be externally connected with my macbook pro unibody version approx. 2007? My cd drive is broke and want to upgrade to lion but need to update to snow leopard first.

    Is there an external cd drive that can be connected to my macbook pro, unibody, approx 2007. My cd drive is broken and I want to install snow leopard which only comes on a cd.

    Yes Any exrernal DVD drive that connecs by USP port will work. It does not have to be sold by or have the Apple name on it to work. I use an Asus, got it from newegg.com. $30US.

  • Blue Screen of Death every approx 20 minutes after upgrading boot camp

    ** This is a repost from another topic forum-- moving it to correct forum**I upgraded my mac book pro with the recommended updater for Boot Camp 2.1 and quicktime/ITunes. As soon as I did this my computer began to crash with a blue screen of death every 20 minutes or so. It would reboot and say a serious error had occurred and report it to Microsoft. In every other way it was functioning ok, but since it occurred every 20 minutes, I now have erased my boot camp partition and resurrected it from a WinClone file (boy am I glad I backed it up). I've seen a few other people having this problem-- has anyone found a solution? I'm back to boot camp 2.0 and running fine. Amount of ram is 2GB and I'm running service pack 2 of Windows XP professional. Also I have Norton Antivirus on the Windows drive.
    Mark

    So I backed up my boot camp partition using Winclone and then opened up the MacBook Pro with Windows XP as the operating system. I turned off Norton Antivirus (I thought the more basic system would have less potential interactions with other systems) and downloaded bootcamp 2.1 again. Installed it and then restarted and then turned Norton back on (Norton AV has actually been a pretty stable version from my recent experience). My external keyboard is now connected and so far so good-- the computer has not been giving me the BSOD every 20-30 minutes. I remembered from long ago-- on the mac side-- I was always told to turn off virus software before installing any new software-- maybe that's what it needed? I will continue to update.
    I never got a blue screen while downloading updates to windows. I've only gotten BSOD after that initial attempt to install Bootcamp 2.1 with antivirus software turned on. And I'm backed up so I can go back to version 2.0 if necessary.
    Mark:)

  • Approx 50% of Windows Clients have to Reinstall to Upgrade Creative Cloud

    Various windows platforms (Windows XP but primarily 7). About 1/2 of them fail to upgrade the Creative Cloud product. I have to use the cleaner to remove it, then reinstall fresh. On Every update!
    All I can really find online is that "yes, this is a problem and this is how you get around it (by cleaning and reinstalling)". WAY to time intensive.
    Suggestions?

    I wrongly presumed this would change the status in Adobe Application Manager from "installed".
    It should. What specific error did you get with your LR? For anything else you might try running the Creative Suite Cleaner Tool and let it reinstall things...
    Mylenium

  • Since upgrading to Firefox 4.0.1 there is a approx. 1" white square in the upper left corner of my laptop screen. It goes away when I close Firefox. How do I get rid of it?

    The problem is stated above. My laptop is MacBook Pro.

    This can be a bug on Mac.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Since I upgraded to 4.0.1 I got a delay on my spacekey, approx. 2 sec. :-(

    This seems to appear only in firefox, not in other programs...

    Yes, same issue here. I get a "verification required" message every time I update any app, and then a message that my iTunes account has been accessed from a new device so I need to confirm my account details. I hit "Done" and get prompted for my iTunes password and around the loop I go again. The details are correct and I don't get this prompt when using iTunes on my Mac.
    This started happening as soon as I updated to iOS 4, have never had the issue before, very annoying.
    Thanks,
    Robin

  • OBIEE 10g to 11g Upgrade Project plan

    Hello All,
    I am a technical consultant working on OBIEE/OBIA and the management needs a project plan for upgrading OBIEE suite 10g to OBIEE 11g (11.1.1.6).
    Can you please share some details as -task list and approx hours required. I have a rough idea of task list in terms environment setup, installations, configuration, custom code migration, testing etc. I want present a professional plan that is being followed by others. Dont want to look odd one out. Your help is appriciated.
    Thanks you !

    See this in the log:
    *02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0*
    You will have to look into why the upgrade utility isnt seeing any instance recognized - it will only work with 1 instance registered and for some reason it cant find any in your configuration.
    You could try looking in Oracle® Fusion Middleware Error Messages Reference 11g Release 1 (11.1.1.6.0) for details on the error.
    Ensure the service instance name is present in jps-config.xml.

  • My 790fx GD70 had approx 3 years of perfect operation, now the HDD led is red :(

    Hey everyone I'm new to the msi forums here, but I built a gaming rig about 3 years ago and its been running fantastic ever since.
    Ive been looking to buy an Radeon 7950 and finally decided on the HIS 7950 IceQ boost clock from newegg for 299.
    So I opened up the case just to make 100% sure that I had the necessary 2- 6 pin power connectors, which I did . I did this while the pc was on (I know dont shoot me!) I didn't touch anything on board just a few wires from the psu to look at the connectors, an my hand slighty bushed the side intake fan, no stoppage or anything like that.
    When I looked up after I put the couple wires back I had no display, no keyboard or mouse, and the red HDD led was lit above the mobo power button :( :(.
    Ive checked all connections and they seems to be fine, my brother has the same board in his rig, so ill take a pic of his and double check mine just to be totally sure.
    The pc powers up with either the case or mobo buttons, all fans (cpu, psu, case, gpu) power up and run normally. All lights are blue that I can see, except for the red HDD led, no display, keyboard, or mouse. Also I cant power the system down by holding down either case or mobo buttons, only by switching the psu off.
    After reading up on this forum and a couple others ive come to a couple possible conclusions:
    Either something came unplugged which ive some how missed, my mobo has shorted somehow after approx 3 years of perfect operation, or my psu has blown.
    Does anyone have any other suggestions for me? Has anyone seen something like this happen before?
    The tough thing is this pc is currently used for music recording through pro tools and was about to become the main media display pc at my church, after the purchase of the new video card, so having it down meant no music recording today at church :( :(
    System Specs:
    AMD phenom II x4 955
    MSI 790fx gd70
    Asus Radeon 5750
    Mushkin Redline 1600mhz 4x2
    Crucial SSD 120gb
    Seagate 150gb HDD
    Western Digital 1tb HDD (pro tools session storage)
    LG CD/DVD RW
    Thanks in advance for any help you guys can give! 
    By the way I wrote all that on my phone! Lol

    Thanks for all the help so far you guys!! Ok so i spent some more time on it and did what you both suggested. Reseated the ram, 2 sticks of 4 gb 1600 mushkin, made sure that all satas were seated properly on both the mobo and HDD sides, and checked all power connections to the board. After that i cleared cmos, and pulled the battery just to be sure.  I checked the case pwr and reset connections on the front of the case and at the mobo, and everything seems to match my brothers board connections (went and took a few pics of his). I also moved my gpu up to the top slot of the mobo so i could see the little led screen on the mobo better.
    So i fired her back up, and the dang red light was still on :-(. Also the little led screen isnt post anything at all, no numbers or letters are showing. I believe my brothers read 42 when i was taking pics of his rig (must be the code for all-is-well lol).
    My psu is an 850 watt Xion. For  + 12v1 and +12v2 its 18A for +12v3 and +12v4 it reads 20A and 22A respectively.
    I dont see xions around much anymore, did they go out of business or something?
    So do you guys think its probably the mobo since its not giving a display at the little led screen? Did it just happen to blow when i had the side panel off, could i have done something without touching the board to cause this? Maybe handling the wires? Could it possibly be the psu?
    It looks like i may be in for an earlier mobo and cpu upgrade then i had originally planned :-P
    Oh also my case is a full tower Azza, im not sure of the model, but its always had great cooling! (But i dont overclock lol)
    Thanks so much again!

  • SAP R/3 System analysis before upgrade 4.6C -- SAP ECC 6.0

    Hello!
    Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
    The following functions should be included in this program:
    - detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
    - comparison against a SAP ERP 6.0 reference system
    - extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
    - syntax analysis of program code with respect of adjustement need
    - quality control of own development
    - control of amount of transports within different company areas
    - control of user information, such a user type, logon date, etc.
    - basic control, whether a sufficient authorization concept is available
    - Identification of objects that should be considered for the archiving in oder to decrease the db-size
    My question are:
    - which tasks can be convered with SAP standard transactions what are the names of the transactions?
    - which effort do I investigate for these tasks?
    Thank you very much!
    regards

    Dear Thom,
    To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://service.sap.com/releasenotes and  http://service.sap.com/upgrade  for functional changes.
    Need to consider the following things:
    For Reports…it’s custom developed program …so unless there is any kind of change in requirement from the client regarding the layout…nothing needs to be changed…I think it will work fine in ECC 6.0 to…except few things may needs to be changed..so you need to discuss whether they want the reorts as it is right now…or want to change the layout (adding some new info/fields etc) of any report…so u need to modify the program for those…and estimate accordingly…for a medium complexity’s Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing)…so to modify it will be less than that (depending upon the scope of changes)
    Now say for Batch Inputs(interface/Data Migration) using BDC…you need to see how many BDCs are there…again if the field lengths and layouts are not changing…then no need to change anything (except the main thing…..you need to change the obsolete function modules…there are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0…there are some new with enhanced functionality so you need to modify the BDCs…and many cases it happens that the whole transaction screen changes for process…in that case better to develop new BDCs…so you have to consider those parameter…look into and estimate accordingly…modifying a BDC should not take more than 1 PD…
    Now say for Forms…there was no Smart form in 4.6C…form printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart form…in that case…it’s complete new dev…so estimate accordingly…a medium complexity’s form should take 8 PD (FRSTDSCoding+Unit Testing)…you can take it as 10 PD too…even if client wants to keep it is as it was in older version…you have to redevelop the layout in ECC 6.0 again…as form printer is even client dependent…maximum you can copy the program associated with that form in the new version too…and your effort will be saved…again you have to consider if clients wants to change the layout too…
    Now for enhancement…so in that case u need to see individual cases…for a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)…
    One more important thing is that the Unicode Compatibility…this needs to be done….needs to change the code (variable name) accordingly….also Version management tool is used for the standard programs…
    Also pls find the following forums:
    Re: Data Migration from 4.6C to ECC 6.0
    List of transations supported in SAP 4.6c and not in ECC6.0
    Re: Upgradation from 4.6C to ECC  6.0
    Re: what's the advantage to upgrade 4.6c to ECC5.0...
    RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
    Upgrade batch inputs from 4.6C to mySAP ERP 2005
    /thread/317225 [original link is broken]
    Upgrade from SAP R/3 to ECC 6.0
    Hope it will help you.
    Thanks,
    Atin
    <b><b>Reward points if it helps.</b></b>

Maybe you are looking for