BW 7.3 Error in DTP if the values are char for the char field

Hi,
I have created a field with
Eg: Field1 CHAR 7 -> i have removed the ALPHA conversion
I am loading the data from ECC if the values are
AA0-992 or AA1-AT1 there is no issue it is getting loaded
but when i am getting the values as AAA-BBB it throws an error.
In RSKC "-" is allowed CHAR.
Can someone help becuase as this is the CHAR field it should accept
Thanks

Hi,
I resolved in between we had the lower case characteris so that thrown and error.
Thanks

Similar Messages

  • The valuation area defined for the plant is not defined in table T001K.

    when i creating the PO for plant ,s/m is giving the following meassage
    The valuation area defined for the plant is not defined in table T001K.

    Hi,
    You have two options to check:
    Option---1:  You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign  in  t.code OX18 and also check the table T001K after this configuration.
    Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
    Now try creating PO.
    Regards,
    Biju K

  • I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

    I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

    What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

  • I got my adobe creative license but the app are asking for the serial number. What can I do?

    I got my adobe creative license but the app are asking for the serial number. What can I do?

    Welcome to Adobe Forum,
    Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
    So you need to login with your Adobe ID and password to activate the cloud membership.
    Log out & log back in of the CC Desktop App.
    In case it is not signing in successfully please try the following:
    I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
       Windows:
       In windows 7 navigate to following location:
         /windows/system32/drivers/etc
       1. look out for "Hosts" file
       2. Open it with notepad
       3. Check if you have any entry for Adobe
       4. Remove the entries and try again launching any product from CC
       Mac:
       1. Please click on "Go" and navigate to /private/etc
       2. Open "hosts" file and check out for any entries for Adobe.com
       3. Remove the entries and save the file
       4.  try again launching any product from CC
    You can refer :
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
    Please let us know if it worked.
    Regards,
    Rajshree

  • How to get the values multiple times for the specified element - ABAP IXML.

    Hi all,
             i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values.  here is the sample xml,
    <View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
    <AbstractView.InboundPlugs>
    <InboundPlug name="ip2">
    <ParameterizedFeature.Parameters>
    <Parameter name="ippara2">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    <InboundPlug name="hi">
    <ParameterizedFeature.Parameters>
    <Parameter name="hipara">
    <Parameter.Type>
    <Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
    </Parameter.Type>
    </Parameter>
    </ParameterizedFeature.Parameters>
    </InboundPlug>
    Here i need to store the following values in internal table, the element to get the values are,
    (1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
    The output will be of 2 records & values should be
    Inbound plug name = ip2
    Parameter name    = ippara2
    Parameter type      = binary
    2nd record
    Inbound plug name = hi
    Parameter name    = hipara
    Parameter type      = Visibility
    These 2 records should be in internal table and then i will be passing to database table...
    Can anyone provide me the code for the above......
    Thanks in advance,
    Vishnu.

    I didn't get ur requirement..
    As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
    XML ABAP  -  may b helpfull
    Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

  • How to hard code the values in XI for the synchronous scenario?

    Hi All,
    Actual Scenario : Webservice - XI - Any of the Receiver Adapter(RFC/JDBC) .
    The receiver adapter setup will take some more days to complete. So, time being I would like to hard code the response values in XI according to the webservice request and send the response back to webservice. Is it possible?
    If it is possible, could you please tell me how to go about for this?
    Regards
    Sara

    Hey
    >>So, time being I would like to hard code the response values in XI according to the webservice request
    if ur response is based upon the request,then how can u hard code any value?when u hard code any element.it will always display the hard coded value irrespective of the request.
    in case u want to hard code something which does not depends on response or which will always stay the same in ur scenario,then just use the constant function of message mapping to do that
    thanx
    ahmad
    Message was edited by:
            Ahmad

  • How can I re-arrange the items under "Bookmarks" i.e. put "SAVED PAGES" ON THE TOP INSTEAD OF NEAR THE BOTTOM. I ONLY NEED "BOOKMARK THIS PAGE" AND "SAVED PAGES" WHEN I CLICK ON BOOKMARKS. The rest are unnecessary for the most part..............Jim

    Read troubleshooting info below............and Question above

    App tabs are special tabs and are always displayed at the left end of the tab bar.
    You can place all bookmarks that you want to see on the Bookmarks Toolbar in the Bookmarks Toolbar folder.<br />
    You can do that in the side bar or the Bookmarks manager if you can't do it on the Bookmarks Toolbar.<br />
    Most Visited is a special (smart) folder that shows websites that you've visited and that aren't necessarily bookmarks, so you can't drag them on the bookmarks toolbar unless you first bookmark them. You can do that by opening them in a tab and clicking the star on the location bar twice and choose the Bookmarks Toolbar as the destination folder.
    *https://support.mozilla.com/kb/how-do-i-use-bookmarks

  • Selection screen value not assigning to the value when executed for the first time

    Hi ,
    Im My program at selection screen there are company code, vendor account and open items at key date(takes system date as default value).
    Facing problem at open items at key date - Open key date parameter is taken from LDB - KDF.
    First time when I am executing the program it is taking system date value in the selection screen variable even though I have given the different date.
    This problem is only when I execute for first time or press enter without giving company code.
    Can any one please help us to come out of this problem.
    Regards
    Sri Bhargavi

    HI,
         you can use the Event as AT SELECTION-SCREEN

  • My iphone is stuck on silent! even though it is not on silent mode, even when i lock the screen it doesn't make the loking sound and the keys don't make sounds when i tye even though the settings are on for the sounds.

    my iphone is stuck on silents, the side switch flicks but nothing happens PLEASE HELP!

    hi iphone users i have had the same problem with the no sound issue i have a little tweek that will gain all sound back on any iphone it worked for me heres what to do if it works for you let me no because ino its a nightmare having a phone with no sound 1st thing go to settings general accessibility scroll down assistive touch click it on when you get the white dot click on it you will have 4icons click on the device 1 you will then see volume up and down and also have little bell make sure volume is up and the bell is not muted there you quick fix for sound also you dont have to keep the assistive on  you can then turn it off you will have all sounds incoming call the lot enjoy hope it helps

  • How the values are stored in Claneder week/year internally

    Hi BW Gurus,
    Can any one please let me know in which format the values are stored in the Calender week.year time characterstic?
    is it YYYYWW or WWYYYY or YYYY.WW or WW.YYYY or YYYY/WW or WW/YYYY?????
    Thanks in Advacne,
    Dilse...
    Hash

    Hi Bhanu & Alessanrdo,
    Thanks for the prompt response. Actually I was trying to populate some values in to the calender week/year variable through the user exit.So, I got confused while updating the values in to the variable. I used the value format which you both had suggested. But no luck.
    The olap control is passing out of my code successfully.
    After the coming out of my inlcude program it entered in the function RRS_VAR_VALUES_EXIT_AFTER there the following if condition is met.
    " IF -vartyp EQ rro04_c_vartyp-value". after that it raised the exceptions and the above message is displayed. Can you please look in to the issue.
    and the message number that was shown is Message No: 00010004 with the following note :
    "AError for variable  in customer enhancement ZLASWK"
    Can you suggest me why it went wrong and what needs to be done...?????
    Thanks in Advance,
    Dilse...
    Hash

  • Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.  Error Code: c0000005  Address: 76f73ac3     I clicked on the OK button and the downloader closed.     I then tried to download from the organizer. I

    Photoshop Elements 12
    Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
    Error Code: c0000005
    Address: 75e32f71
    I clicked on the OK button and the downloader closed.
    I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
    I don't even have the Camera hooked up and I get this error on download.  I redownloaded everything and reinstalled.  I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work.  I tried support and they wouldn't help because I bought it in March this year.  Pretty frustrating as I have re-purchased Elements about every 2 years.  I think I might need a new CODEC?   I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

    I finally found that it was missing a picture so the Catalog was "corrupted".  I just deleted the picture and it started working.
    I hate Adobe and their total lack of support - thanks for nothing Adobe .  Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old  but they still don't support it on errors.  Only install errors!
    I have upgrade and repurchase this product 4 times now.  I will find something else next time!

  • I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

    I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
    Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
    Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
    How do I fix this?

    Hi there scarbo59,
    You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below. 
    iOS: Unable to import photos to computer
    -Griff W. 

  • I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

    I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

    Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
    That will take you to 10.6.3.
    If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
    SL system reqmts;

  • HT201442 iOS: Restore error 3194 or 'This device isn't eligible for the requested build', all program downloaded but till showing same problem, kindly suggest me

    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Error with clob column: "No pl/sql translation for the blind type given for this bind variable"

    This is reports 11g
    I've got a clob column. Reports seems to recognize its type, but if I try to reference it in a format trigger, I get this error at compile time:
    "No pl/sql translation for the blind type given for this bind variable"

    Actually, Reports is in something better than Forms.
    Neither Forms nor Reports do not have "complete" SQL engine (both have only "complete" PL/SQL engine), but have their own SQL parser, which does not understand SQL commands after the database 8.0.
    But, in Reports Data Model - SQL Query Statement, we can write "modern" SQL statement (> database 8.0), because Reports sent it directly to the database, without using their own SQL parser.
    For example, in Reports Data Model - SQL Query Statement, we can write this (scalar subquery expressions, in bold):
    select empno,
           ename,
           deptno,
           (select dname from dept where deptno = emp.deptno) dname
      from emp
    order by empno;
    although scalar subquery expressions was introduced in the database 9.0.1, and in databases 8.0 and 8.1 we should write someting like this:
    select emp.empno,
           emp.ename,
           emp.deptno,
           dept.dname
      from emp,
           dept
    where dept.deptno = emp.deptno
    order by empno;
    Regards,
    Zlatko

Maybe you are looking for