BW APO Transport steps (also please look into the error).
Hi all,
We have created data marts from BID to APOD and the loads are fine, I am ready with the trasports from APO dev to APO quality. I captured the replication (datasources), Transfer Structure, comm structure, update rules and infopackage, process chain .. everything is on APODev side..When i trasported orderly,we are getting this error.
Object 'DM' (APCO) of type 'Application' is not available in version 'A'
Message no. RSO252
You wanted to generate an object with the name 'DM' (in transport request APCO) of type 'Application' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please give me the resolution with the above error, please tell me what all i need to capture when i trasnport the datamrts.Do i need to cature anything on BID also...or only in APO DEv.
Thanks
arya
Hi Sam,
They are on different appliction servers, I have done the steps in APO QA some time back..i replicated the data source on APO QA side.. and i tried to move the transports , still i get the error..
I am confused at one point and need some help in clarification. I have ODS on BW side and Cube on APO side, so when i do the generate export data source on BW side. should i send the ODS activation from BID to BIQ as well, My point here is should i transport anything on BW side (BID to BIQ) apart from APO DEV to APO QA,
i have all transports ready on APO Dev side and i am getting the error,
Please let me know if i can give more details.. thanks for your answers
Similar Messages
-
Unable to to save photo attachments from emails in ios7
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks
There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/
-
Whenever I click on the button of Firefox 4.0 Beta 10 located in my shortcut bar. It opens after a very long time i.e. after 5-10 minutes after I get irritated and start using Safari. And sometimes it doesn't even open. Please look into this matter. :D
ThanksTry disabling hardware acceleration in your Firefox settings and see if it helps:
From the Firefox menu, go to '''Options''' and click the '''Advanced''' panel, then select the General tab. Clear the box in front of "Use hardware acceleration when available" so that it is unchecked, then restart Firefox. ([http://support.mozilla.com/media/uploads/gallery/images/2011-01-27-04-52-31-8c9d82.png screenshot]).
Ref: <br>
https://blog.mozilla.com/tglek/2010/12/21/rude-surprise-startup-overhead-of-windows-font-apis/ -
Cofirmation #214861700. Would you please look into it? Thanks.
Please look into my refund for cancellation. Confirmation #214861700. Thank you.
Pat RegerI have called Adobe three times and each time have been told the refund will be or has been refunded or "we are looking into it", but so far, the $29.88 still has not been credited to my Visa
account.. It was deducted on 2/09/15. I think that is more than enough for it to be "looked into". Please do more than check in to it. Please refund the amount. Thanks very much.
Pat -
I am having mac book. I order for I-boost up software for $9.99 on 5th oct 2012 installed and paid through credit card. Again on 8th oct2012 my credit card debited with $9.99 please look into matter why this amount debited ,if wrongly debited please refund.
Apple deosn't respond here, just other users like you.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
My husband got a new ipad and set up his own apple id without looking into the implications of that. Now I want to sync this ipad with our itunes so we can access it on here, but our itunes has a different apple id. Any way to do this?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?
If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly. -
Itunes is not working says windows is looking into the problem
itunes is not working says windows is looking into the problems
Hi mofins,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are having issues with iTunes on your Windows machine, you may find the following article helpful:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Regards,
- Brenden -
I don't have an Apple device, so how can I take a look into the iBookstore to find my book?
You can access the bookstore via iTunes on your Dell.
-
I downloaded a program to help me with a game I am playing. I can't open the link. All I see is a blank page. I looked at the error console and it said detectFlashVer not verified. i am sot sure why it would say this. I have updated and redownloaded flash a bunch of times. I just don't know why i can't open this link.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I am unable to empty my trash w/o getting an 8003 error.Some of what is in the trash is BackUp from Time Machine. I have tried to Secure Empty and also Unlocking folders yet the error continues. There is over 300gb that I need to trash. MacPro 10.6.8
See #E6 in Time Machine - Troubleshooting.
-
Please look into this.. where i have to write at end of
HI all ,
i am getting this output in my report.
the first column is the division (D.C) and the next couln is the no of consumer(no of business partner in a perticular dc (this is the count of dc))
314200 0
314201 1
334300 0
i got the value of the first two digit of dc in a variable.
now when it change from 31 to 33 i want to get the value of no of count .
but the atatement AT END OF IS NOT WORKING ...
Can anyone just look at the code and let me where i have to change..
REPORT ZDISTRICT_CUST_AUCSALES.
LINE-COUNT 40(4).
******************************************************TABLE DECLARATION
TABLES: /BIC/AUCSALES00,
/BIC/TCOKEY.
*******************************************************DATA DECLARATION
DATA: BEGIN OF ITAB OCCURS 0,
/BIC/COKEY LIKE /BIC/TCOKEY-/BIC/COKEY,
TXTSH LIKE /BIC/TCOKEY-TXTSH,
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
BILL_DATE LIKE /BIC/AUCSALES00-BILL_DATE,
/BIC/COKEY LIKE /BIC/AUCSALES00-/BIC/COKEY,
BPARTNER LIKE /BIC/AUCSALES00-BPARTNER,
END OF ITAB2.
DATA: COUNT TYPE I,
COKEY TYPE I,
COKEYNO(2) TYPE C,
BILDT TYPE I.
DATA: C TYPE I VALUE 2.
*DATA: /BIC/COKEY TYPE /BIC/AUCSALES00-/BIC/COKEY.
SELECT OPTION FOR DATE SELECTION IN THE SELECTION SCREEN.
SELECTION-SCREEN BEGIN OF BLOCK DATE WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_BILDT FOR /BIC/AUCSALES00-BILL_DATE OBLIGATORY default sy-datum.
SELECTION-SCREEN END OF BLOCK DATE.
*********************************************************INITIALIZATION
*INITIALIZATION.
FORMAT INTENSIFIED ON COLOR = C.
write:/ 'PROCESSING DATE:', 20 SY-DATUM,
125 'TIME :', 130 SY-UZEIT.
WRITE:/ 'USER NAME :', 20 SY-UNAME, 138 ' '.
WRITE SY-ULINE.
WRITE: / 'D.C' , 12 SY-VLINE,
'NAME OF D.C' , 36 SY-VLINE,
'BILL DATE' , 53 SY-VLINE,
'NUMBER OF CONSUMER' , 74 SY-VLINE,
'REMARKS' ,105 SY-VLINE.
write sy-uline.
*ULINE AT (100).
FORMAT INTENSIFIED OFF.
*END-OF-PAGE.
WRITE:/40 'PAGE NO:', SY-PAGNO.
*****************************************************AT SELECTION-SCREEN
SELECT BILL_DATE
UP TO 1 ROWS
INTO (/BIC/AUCSALES00-BILL_DATE)
FROM /BIC/AUCSALES00
WHERE BILL_DATE IN S_BILDT.
ENDSELECT.
IF SY-SUBRC <> 0.
WRITE:/ ' NO DATA FOUND ON THIS DATE'.
EXIT.
ENDIF.
START OF SELECTION
SELECT /BIC/COKEY TXTSH from /BIC/TCOKEY into table itab.
IF NOT ITAB[] IS INITIAL.
SELECT BILL_DATE
/BIC/COKEY
BPARTNER
FROM /BIC/AUCSALES00
INTO CORRESPONDING FIELDS OF TABLE ITAB2
FOR ALL ENTRIES IN ITAB
WHERE /BIC/COKEY = ITAB-/BIC/COKEY
AND BILL_DATE IN S_BILDT.
SORT ITAB BY /BIC/COKEY.
ENDIF.
***********************CHECK WHETHER THE DATA RETRIVE SUCESSFULLY OR NOT
IF SY-SUBRC NE 0.
WRITE:/ 'THIS DATE DOESNOT CONTAIN ANY DATA'.
ENDIF.
************************************************************DATA DISPLAY
LOOP AT ITAB.
MOVE: ITAB-/BIC/COKEY+4(2) to COKEYNO.
READ TABLE ITAB2 WITH KEY /BIC/COKEY = itab-/BIC/COKEY.
IF SY-SUBRC = 0.
SORT ITAB2 BY /BIC/COKEY.
DELETE ADJACENT DUPLICATES FROM ITAB2 COMPARING /BIC/COKEY.
ENDIF.
IF ITAB2-/BIC/COKEY = ITAB-/BIC/COKEY.
SELECT COUNT( DISTINCT BPARTNER )
INTO COUNT
FROM /BIC/AUCSALES00
WHERE /BIC/COKEY = ITAB2-/BIC/COKEY and
BILL_DATE IN S_BILDT.
COKEY = ITAB2-/BIC/COKEY.
WRITE:/ ITAB2-/BIC/COKEY, SY-VLINE,
15 ITAB-TXTSH, SY-VLINE,
42 ITAB2-BILL_DATE, SY-VLINE,
55 COUNT, 74 SY-VLINE,
' ', 105 SY-VLINE.
WRITE:/ SY-ULINE.
ELSE.
COKEY = ITAB-/BIC/COKEY.
WRITE:/ ITAB-/BIC/COKEY, SY-VLINE,
15 ITAB-TXTSH, SY-VLINE,
51 '0' , SY-VLINE,
55 'Not Processed', 74 SY-VLINE,
'Data Not extracted to BW', 105 SY-VLINE.
WRITE:/ SY-ULINE.
ENDIF.
CLEAR: ITAB, ITAB2.
ENDLOOP.
thanks in advance..Hi
In this case instead of using AT END OF just create temp. which will hold in it last value of dc,every loop run, check it with new value, if it not equal - get the desired value
only condition - itab must be sorted
temp = 'x'. -->you need to put the first value
loop at itab.
if temp <> COKEYNO.
--->your actions to get your value
endif.
temp = COKEYNO.
endloop.
OR
you can add one more field to itab (better first) with COKEYNO
fill itab in this field and then
loop at itab.
at end of cokeyno.
endloop.
Regards
Yossi -
Transforma​tion problems, please look into my vi
I have been working on a 3d display of a force sensors.
The sensor will give the data of Fx, Fy and Fz, and i would like to display the resultant of the forces into a 3D display.
I formed two arrows to represent the resultant of the force working on the sensors.
So in my case i already have the arrow originally faced into a certain axis (i.e x axis).
I need to rotate it so it would looked correct according to the resultant of the 3 forces value.
If the original vector of the arrow would be [1 0 0]^T. and the result vector would be [Fx Fy Fz]^T.
i need to find a sets of angles (i.e. euler angles phi, theta and psy) to perform a set of rotations.
Here is the vi and some of the picture,
Another problem, why i can't set the initial rotation of the arrow (as seen on picture)
-Just a student-
Attachments:
test vrml 2.vi 76 KBSorry, I cannot run your VI because if missing data files.
Just looking at the code, part of your problem could be race conditions. You should look at your code very carefully!
In the attached code, the only reason you need the "first run?" check and case structure is the fact that you read from a local variable (RGBA) before the code has a chance to write to it. Since the control of the local variable is hidden, it can never be changed by the operator and since you write the same old constants to it 10 times per second does not make things any better. Why don't you eliminate the hidden control and wire things directly? If things remain constant, you can even bundle before the main loop.
Things that don't change don't need to be repeated over and over again. You need to define the background color only once and not 10 times per second. Much of your code belongs outside the while loop, because it needs to be done only once.
Let's look at the code in your picture:
You have all disconnected controls (1). You calculate theta1 and phi1 from two disconnected code segements (3), (6), and then read their value from local variables (7), (8). Since there is no data dependency between all these processes, they will occur in unpredictable order and is is very likely that you will read e.g. theta1 at (7) before the upper code has a chance to write a valid value to it. Why don't you use a wire between theta1 and the entry tunnel, eliminating the local variable? Now you have a data dependency and the case cannot start until it receives a valid theta from the calculation above. Similar arguments apply to many other sections of your code.
You need to use dataflow to ensure execution order! Currently you make typical mistakes that text programmers make when starting out with LabVIEW. For one perspective, see my old post here: http://forums.ni.com/ni/board/message?board.id=170&message.id=112401#M112401. Most likely, you can eliminate virtually all local variables.
Message Edited by altenbach on 07-17-2007 08:45 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
3D1.png 25 KB
3D2.png 95 KB -
Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s. I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup. However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all. The only way I can access the internet is through my wi-fi. So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer. Any thoughts and/or recommendations/suggestions? Many thanks.
Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s. I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup. However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all. The only way I can access the internet is through my wi-fi. So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer. Any thoughts and/or recommendations/suggestions? Many thanks.
Maybe you are looking for
-
Display data in diagonally in table using XML publisher
Hi, I need to display data of the invoice which contains columns ( invoice_number,receipt_number,amount,quantity) where i need to dispay amount and quantity diagonally for the invoces i.e. the data will extend dynamically. please give me an idea to r
-
3 external IP's, one WRT610N, 2 PC's and a NAS
Can it be done with what I have? Here's my situation: I have a modem (fiber optic) which comes with 3 LAN out's, each of them with a designated fixed global IP (x.x.x.26-28). I have been using one of these (.26) with my WRT610N (Internet port) to con
-
Home movies imported via iTunes don't rotate...but all other videos do.
Anyone else having this problem?: If I'm watching a movie or podcast that I downloaded, I can watch it in either portrait or landscape mode - regardless of it's aspect ratio. But I've shot a few videos with my iphone, threw them into iTunes as "movie
-
AppleScript Needed for reply-to heading replys
I need help editing this script to reply to multiple emails I get from PayPal that will reply to the email's Reply-To Heading, not the From Heading, which of course is PayPal. This script works for everything but replying to the return path (Reply-To
-
I purchased an app from the App store on my mac, now how do I get it on my iPhone?
I have several apps that I purchased on my mac from the app store, now I cannot figure out how to get them onto my iphone. Can anyone help? Thank you!