BW Archiving issue - Data not being picked up

Hi,
I am using ADK Archiving to archive a cubes data ( to application server files). The config is working perfectly in DEV however in QA I get "0 data records copied in volumes of 0 KB" even though data is present for the selection criteria.
I do not see any authorization issue or other error in job log... Anyone seen this issue before ? Please advise.
Thanks

Hello,
Are the requests compressed? In 700, the data in the infocube must be compressed or it cannot be archived.
Best Regards,
Vincent

Similar Messages

In Production Order Old Raw Material Batch No. not being picked (FIFO)

Hi,
We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
We have not done any changes into the Master Data nor the config during this period.
Can anyone help what can be the issue ?
Thanks in advance,
Harris Panchal

Hi,
Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
For that the MM Consultant has configured the following Charac:
1. Stock Determination: Priority
2. Value Assignment Type
3. Batch Number
Which I am feeling should be changed and to be as per the following:
1. Created On
2. Batch Number
In OMCV, Classification is active with following option:
4 Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
3 Classification always in foreground (all batches) for the following movements: 321, 501
Requesting your valuable inputs,
Thanks and regards,
Harris

Delivery document not being picked while creating shipment document

Dear All,
Issue is regarding creation of shipment document.
As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
I have created a sales order, picking is completed n saved, PGI not yet been done.
Am unable to create a shipment document due to delivery document not being picked.
i/p's will be of great help.
with regards,
Vijayashree

Dear all,
The issue is solved.
As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
Route determination setting was not correct.
Regards,
Vijayashree

Item in sales order not being picked into picking list

Hi Gurus,
Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
Many Thanks
Choudry

Hi
Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
Try by changing the schedule lines in sales order in VA02
there you try to change the delivery date to past
It might be possible if you had enough stocks at that time
Regards
Raja

Agreements Not Being Picked For SFTP Protocol in Oracle 11G

Hi Anuj ,
PFB the Details of the Issue :
Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
Error Code : B2B-50547
Error Description Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
Patch Level : 14114625
Regards,
Rohith

Hi Anuj ,
Thanks for the reply .
Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
Regards,
Rohith

File not being picked by adapter

My Source file name is xml_a1_en.xml
the test files are of name xml_a1_02_en_2010.xml , xml_a1_03_en_2010.xml
the files are not being picked up by adapter..Is the naming convention wrong for the test files or any reason?

Hi Mr.King,
I am assuming your OS is Unix system right?
If yes -> check the file permission?
if Only Reading: permission should be 664
Move the file after reading: 775
Regards,
Senthilprakash

Large files not being picked by FTP adapter

Hello,
In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
Thank you

Please provide a J2EE trace at logging severity "Debug" for the location
"com.sap.aii.adapter.file". Please do the following:
- increase logging severity to "Debug"
- set log levels to ERROR for all components
- ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
- reproduce the problem and gather the defaultTrace.trc immediately
after you reproduce
- remember to reset the logging severity after you have reproduced as
leaving it on "Debug" can cause performance problems in your system.
Also the ftp server logs will be needed in this case.

What's the error? Longtime site not being picked up by Google

This site has been up for a year and is not being picked up by Google. What is the problem?
Any suggestions much appreciated.
www.elspethcameron.com

+(sorry for my english, it usually is better than that I think/hope)+
Ok... Let's see...
www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
The real website is, at least partially, on google with its content as you can see here
http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
Regards,
Cédric

Having an issue of not being able to add tracks to a project. It worked fine before, now nothing.

Having an issue with not being able to add tracks in Garage Band projects. Tried adding from both the TRACKS menu up top, and the "+" button at the bottom of the project page. It used to work fine, now all of a sudden nothing.

What is your GarageBAnd version?
How many tracks do have already? There is a limit to the number of software instruments that you can add, depending on the amount of RAM you have installed.
Tried adding from both the TRACKS menu up top, and the "+" button at the bottom of the project page. It used to work fine, now all of a sudden nothing.
Are the buttons greyed out, or simply unresponsive?
If the buttons and commands are unresponsive, I'd try HangTime's oddball problems fix and trash the GarageBand preferences file - move com.apple.garageband.plist from the Preferences folder in your user library to the Desktop - see the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

TS1363 My new IPod is not being picked up by my computer. What should I do?

My new IPOD is not being picked up by my computer. What should I do?

@vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
Let me know how it goes. Good luck!

Forms Bean changes not being picked up from updated jar

I've got an existing, working Bean with a single static method which my forms use to check the last modified date on a file. I've been trying to add a second method, with no luck. In an attempt to see if my new jar was being picked up, I changed the existing method to simply return "testChange". When it continued to return the string representation of the file modification date, I assumed my jar change wasn't being read.
However, I eventually tried creating my new method in a separate class, this time not extending VBean, and include it in the same jar. I can now execute my new method just fine.
My questions are
1) Why didn't adding the new method to the existing class work?
2) Given that I can demonstrate my changed jar is being used by the form, how on earth is the old method still returning the file date, when the code doesn't do that anymore???
I've got it working, but I'd really like to understand why my previous attempts failed.
Original class:
public class myClass extends VBean
     public static String getLastModified(String filename)
          File file = new File(filename);
          return Long.toString(file.lastModified());
Forms invocation:
FUNCTION get_last_modified_date (file_name_in IN SWtype.SW_long_string)
RETURN DATE
AS
v_last_modified SWtype.sw_long_string;
BEGIN
v_last_modified :=
fbean.invoke_char ('SW_WEBUTIL_BLK.SWFILEUTILS'
,1
,'getLastModified'
,file_name_in
return TO_DATE ('01/01/1970 00:00:00', 'DD/MM/YYYY HH24:MI:SS')
+ v_last_modified/(86400 * 1000);
END;
Method changed for testing:
public class myClass extends VBean
     public static String getLastModified(String filename)
          return "testChange";
New method:
public static boolean isValidUTF8(String filename) throws FileNotFoundException,
IOException
<if not valid UTF8>
return false;
return true;
Invoking the new method when it was in the bean (just returned null):
v_result := fbean.invoke_bool('SW_WEBUTIL_BLK.SWFILEUTILS'
,1
,'isValidUTF8'
,:my_blk.file_name
Invoking the imported Java method now that it's in its own class:
v_result := myfilevalidator.isValidUTF8(:upload_blk.source_file);
In case it's relevant, I'm using JDeveloper 10.1.3 and Forms Builder 10.1.2.0.2, running the forms locally on my OC4J instance.

Why didn't adding the new method to the existing class work?
2) Given that I can demonstrate my changed jar is being used by the formBoth statements point to the direction that the "old" class is still there, but maybe in a different jar-file. java takes the first occurence of a class, so maybe for the "old" class it finds it in a different jar, but the "new" class is not found in that jar and therefore taken from the actual jar. check The archive or archive_jini-tag and remove all unused or redundant jars. You maj also try to clear the jar-cache.

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Database adapter - timezone value not being picked up

We are using Oracle SOA suite v 11.1.1.6, along with database adapter to connect to different Oracle database - D1 and D2. All 3 system - SOA suite, D1 and D2 are set to different timezones. Within the SOA composite, we are using Database adapter to
query data from Oracle database
execute pl/sql stored procedure in Oracle database.
In all cases we noticed that the date time data seen in the SOA EM console is same as in the respective database system, but surprisingly the timezone value in the data field is constant and it does matches with that of SOA suite.
<D1_DATE>2013-08-15T01:10:00.000-06:00</D1_DATE>
<D2_DATE>2013-08-15T02:10:00.000-06:00</D2_DATE>
Ideally the timezone value should match with that of respective database, from where the date value is being picked up. Did we miss any set up or this a known issue ?
Thanks.

The database column is of "Date" data type. Was just checking, if the DB adapter can be configured to look into the timezone set at the Oracle data base and use that along with the actual data in the "Date" type column
Am aware that, if i use the "Timestamp with Timezone" it works good.
Thanks.

CRMXIF_ORDER_SAVE_M - Lead_Start Date not being populate.

Hi Gurus,
I am migrating Lead Data in SAP CRM using CRMXIF_ORDER_SAVE_M / CRMXIF_ORDER_SAVE_U03 IDOC structure. The problem is that the Lead Start and End dates are not being passed to the database. I am populating the data at Header Level using the appointment segment. You help is much appreciated.

Hello,
I am not sure what you mean exactly, however you can test first in crmd_order
to create a lead and have a look (in debugger) which fields are needed and how they are stored on database.
Please verify also your date profile and date type and rules.
Best regards
Rene

Pricing data not geting picked in business orders

Hi All,
I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc.
Yet when i try to create an order and enter the product, the pricing does not get picked?
I tried alot but dono what is going wrong.
If anyone can help, that would be great....
Nicol

Nicol,
Going by your words that you have maintained all the settings, I wont challenge that.
However I would like you to check one specific setting in item categories.
In item category customization, check settings for pricing relevance. Make the relevant setting.
Just a thought though. Hope this helps.
Julius

BW Archiving issue - Data not being picked up

Similar Messages

Maybe you are looking for