BW as source system for 2 other BW systems

Hi
My BW1 system works as a source system for 2 other BW systems say BW2 & BW3.
I would like to configure infosources in BW1 system so that infosource A would be visible only from BW2 system & infosource B would be visible only form BW2 system.
Is it possible?
If YES how to do it?
Thanks a lot.
Pawel

Hi,
Hope you aware of Infosources interacts with Replicated Datasources.
As per your post, BW1 is a source system for BW2 and BW3.
So, you have to create Infosources in BW2 and BW3. So you have to replicate the datasources in BW2 and BW3.
Regards,
Suman

Similar Messages

Logical System for RFC-Business system?

Hi,
I want use RFC adapter for my scenario like File to RFC.
The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
Regards
Gopi

logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
you can check the logical system names of ABAP application servers at bd54 tx code.
Regards,
Henrique.

How to copy a structure from one SAP system to other SAP system in ABAP

Hi All,
We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it .
Regards
Channu

Channappa,
It is really not hard to manually create the structure. Ctrl-Y copy from the source system screen and paste in the target system screen. You'll have to do this one page at a time. So, you will have to repeat it 9 times (or 18 times if you have to copy/paste component list and type separately).
I can assure you that you can finish the task in less than 30 minutes.

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Inventory cube datamart from one BW system to other BW system

Hi experts,
I have a requirement wherin I have to load the data from Inventory Cube 0IC_C03 from my old BW system to new BW system along with the markers & historical data.
So I have generated the Export datasource of 0IC_C03 and mapped with transformations to my new cube.
As per the 'Note 375098 - Data mart extraction from non-cumulative InfoCubes' , I have extracted using infopackage from the source infocube using the 0RECORDTP = 1 but I am not getting the option in DTP as 'Initial Non-Cumulative for Non-Cumulative values'.Since my datasource is not having the check box 'Opening balance'.
If I try running it as normal update then the DTP load is failing with the error as unlimited time characteristic as the 0calday is having the date 31.12.9999 for all marker records.
After the Full load (0RCEORDTP=1) to PSA,I also tried making the datasource to have 'Opening balance' marked using the ROOSOURCE table STCKUPD field and then tried using the option 'Initial Non-Cumulative for Non-Cumulative values' but still it's extracting zero records to Target cube from PSA.
Please guide me how to proceed with this without extracting the BX initialisation from R/3 system.
Thanks & Regards,
Ugendhar

Hi Ugendhar,
did you manage to solve your issue? I'm getting the exact same problem....
Thanks,
Enric

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

How to define an export system for a production system?

Hello:
I remember there is a way to define an export system for a PRD.
However I cannot recall exactly what to do: in transport profile or instance profile?
Could any expert help find out this?
Thanks with points!
Regards!

Hi,
Are you trying to configure CHARM? In that case, try setting the domain controller as the production system and keep CTC=1.
This should help.
Thanks,
Rinkal

Data transfer using EDI from one SAP system to other SAP system

Dear all,
I understand that i should use normal ale-idoc features to transfer data from one sap to other sap system.
but can i transfer those idocs using EDI from one SAP to other SAP system

Hello,
surely you can do so.
EDI means that you transfer data in standardized EDI-formats. To get the data at the source into that formats you normally use an EDI-Converter, which maps the IDOC-format into the EDI-format. Then you send the data in EDI-format to an EDI-converter at the target. There's the reverse mapping. You map the EDI-Format into IDOC-format and book these IDOCs into SAP.
I think this makes only sense if you cross organizational borders within the business process, e.g., if you define an exchange with many customers, but not all of them have an SAP-system.
Regards Wolfgang
Edited by: Wolfgang Valtin on May 19, 2009 6:13 PM

Move IDOC Configuration from one sap system to other sap system

Hi All,
I have a scenario where in we need to move the SAP Configuration including Port,partner funtions details etc to other Sap system .As per my knowledge we have some SAP Standard tables which stores all the SAP Config data .So my thought is that if we move those table entries from sorce sap system to target sap system the task will be completed however i dont know which table entries i need to move.Kindly suggest.
Venu

Many of these IDoc settings are not asking for transport requests, since they are considered master data (table class A). They are to be done directly in each system, because the are often linked to information that is or might be specific, like master data, logical system names, path names, etc...
Please also search for previous discussions, you are probably not the first one encountering this issue.
Thomas

3rd party tech systems for multiple business systems...

I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-Teresa

Hi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
<i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk

Information needed on having one more CEN system for the monitored systems

Hi Everyone,
I need some information regarding configuring of one more CEN system
system for the systems which are already being monitored by another
central system.
1) Do I need to register a new CCMS agent on the monitored system for the NEW CEN system again. As I already have sapccm4x registered in the monitored system for the old CEN system, which i think can't be used for the new CEN system.
If I can go with configuring NEW CEN system for the same monitored systems, can you tell me how should I proceed.
Can anyone help me by providing the information for this issue.
Regards,
Bharath Kumar.K

1) yes you can use DSL with what you have, but you want more RAM and I would recommend getting OSX.3 or above because the web browsers for OS9, which I assume is what you are running, are a bit dated and not well supported any longer.
2) Yes you can add more RAM. The 64meg stick in there can be removed. You can add up to 1 Gig of RAM via two 512Mb PC100 or PC133 DIMMS.
See here: http://tinyurl.com/qdlo3
I would add at least 512 Mb if you use OSX and no less than 256 mb if you are using OS9
3) No you can not use CD-R or CDRW with the hardware you have. That iMac only has a CDRom drive and can not burn CDs. You can buy an external CD burner if you want to back up to CDRs
PS: You may want to remove your serial number from your post. Granted the warranty has expired but there's no need or reason to list it.

If SAP FICO as standalone system with other legacy system.

Hi All,
If SAP FICO as a standalone sytem with other legacy systems what is the impact on the SD module.
For eg: what we will miss or cant do the transcations with the SD perspective in SAP.
Thanks
ANGKS

Hi,
1. Yes all the dat needs to be copied
2. You can just assign the users in your orginazation structure to the profiles(Master data specialist, steward etc.) in BRF+
3. After copying the data to your standalone ECC 6.0 instance, all the process of data governance happens on your standalone system and once it is done you can replicate the data to your SAP 4.7 system. According to my experience, no functionalities will be missing.
Regards
Goutham Kanithi

File Permissions on Oracle Directories for other Operating System Users

Hi,
I am trying to export the table data to flat file using a pl/sql function using UTL_FILE package and directories created using 'CREATE DIRECTORY' command. The function is called from a stored procedure which in-turn is called from a Java program using JDBC and the Java process runs as different operating system user. The problem for me is the file exported is being written as 'ORACLE' user with 'OINSTALL' group and '-rw-r--r--' linux file permissions. When I try to read this exported file from the java program it throws me a file access error.
I would like to know if we can specify any additional parameters either in
1) Database parameter file
2) UTIL_FILE.FOPEN function
3) CREATE DIRECTORY command
so that the files written to the DIRECTORY have a read write access.

Since you attempting to read the file from Java, you are constrained by the OS.
Write a stored proc to read the file, since PL/SQL does have the correct permissions to read/write to files.
P;

External debugger for other frontend systems!?

Hi,
I am working on one issue,
I.E.
There is dotnet front end page --- where I am getting some error(not syntax or any its functionality error)
And the coding part behind this functionality is done in RFC function module!
How can I find out this function module...
(I know that function group which contains more than 25 function modules)...
Can I put external debugger for this RFC(If find).?
Let me know about this.
--Naveen Inuganti.

Hi,
I got this,
you should have user name and password to acces that HTTP(.Net) page.
Ofcourse its mandatory.
Same user name should have Debugging authorization in the SAP system, where its targets.
And You can give that user name at DEBUGGING setting and make sere that check box for session debugging on for that user.
Hope you know path for above settings,
UTILITIES -> SETTINGS-> ABAP Editer -> Debugger tab.
--Naveen Inuganti.

About to put EHP4 onto ECC 6 - are EHP's for other SAP systems required?

Hi All,
In our landscape we have ECC 6, Solution Manager, SRM, BI and Portal. we are about to start a project to put EHP4 onto the ECC 6 system, as a pre-requisite to this we are also putting EHP1 onto our Solution Manager system.
I have been told that we may also need to put EHP's onto all the other systems in our environment, does anyone else know if this is necessary as I assumed that the systems would still be compatable without the EHP's on SRM, BI and the Portal.
Thanks
Simon

It is not required, but I would recommend it.
I just upgraded to EHP4 in ECC and also applied EHP1 to Solution Manager, XI, BI, and the Portal. This client is still using SRM 5.5 so we just applied Support Packages to it. The systems will still be compatible if you leave them alone, though there may be a few notes that have to be applied for some functionality. But since you are already going to have a maintenance window for ECC, you may as well upgrade the auxiliary systems while you are at it. If it is anything lik ethis environment, the other systems can be upgraded during wait times for the larger ECC system.
We also encountered very few issues related to applying the enhancement packages, so testing was very smooth.

BI Reporting from one system for other countries

Good Afternoon
I need all the information I can get around doing reporting from one central BI (in SA) to different countries. The systems utilized in these countries are not SAP Systems and it seems that access to the specific systems may not be possible. Information around Project Management, hardware, access, IT Related issues etc will be highly appreciated.
We will be on BI 7.0 in two months. (Currently on 3.0)
Thanks in advance
Cornelius Faurie

Hi Cornelius,
You can connect to any system using SAP BI. It is not necessary to have all ur heterogenous systems to be SAP. You can connect and get data from any non SAP in to ur BI. So that you can use all the features that a tipical Datawarehouse system Provides. But to get data from such number of hetergenous systems of different countries you have to wrok a lot for data extraction. ou can make use of severtal data retrival mechanisms that BI provides.
For example please fo through these links which explains u how to get data from different systems:
[http://help.sap.com/saphelp_nw70/helpdata/EN/e9/6bf2d90e533f409ee56d3f586c325a/content.htm]
Revert back for further queries.
Regards,
Rajkandula

BW as source system for 2 other BW systems

Similar Messages

Maybe you are looking for