BW chains in Error status - processes within the chain not aligned with BW
Hi,
Have anyone encountered scenario where processes within BW process chain are not listed in the correct sequence when chain gone to Error status?
If we need to skip to the next process, ignoring the current error process (w/o referring to the chain in BW), I would have picked the incorrect process to reply to Operator.
Any thoughts?
Thanks,
Kevin Ng
No answer
I have impl. a workaround: I trigger event, which starts the precalculation of WebTemplates.
p.
Similar Messages
-
How to increase the input gain within the program not just with hardware?
Im guessing its probably the simplest thing Ive just overlooked,but can you increase the gain within the program its self. Ive just been doing it with my interface and I cant always get the amount I want.Any help would be great.Thanks
As I understand, you'd like to record things louder than they appear on your audio interface input, don't you? This is not possible at all. But you can make it louder after recording and this can be done in several ways:
1. Move the fader up (you can add 6db this way)
2. Add the helper plugin Gain - this way you can add additional dbs
3. Add any EQ plugin, they always have a gain fader but remember, EQs usually add some colour to the sound even if no other parameters are altered.
The above were the ways to increase the voulme without altering the soundfile itself, the following alter the soundfile:
4. doubleclick the file and it will appear in the sample editor. Now you can use 'normalize' to max the volume, you can use 'audio energizer' to make it louder but also to change the character.
Hope this helps.
EDIT
If your audio interface has its own mixer which comes BEFORE the signal gets into your sequencer then you can increase the volume there. But I guess this is not your case.
Message was edited by: samplaire
Message was edited by: samplaire -
Object failed to run due to an error while processing on the Job Server
when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT. -
Add at least one process to the chain before saving !!!
Hello SDN s,
How ya all ?
I am building a Process Chain which loads around 35 Transactional Data InfoPackages. For this the requirement is to Delete Indexes collectively before the 35 data loads and after the data loads the Indexes has to be Generated.
Here i D&D the Data Target Administration -> Delete Index with that Create Index (Generated from DROPINDEX) came automatically. I removed the link between these 2, and tried to keep the 1 st InfoPackage with Execute InfoPackage, it gave me the message
Display More Chains:
Process Z_DELODS (type DROPCUBE) has already been used in other chains
Do you want these chains to be displayed in the maintenance screen too
Yes / No / Cancel
Then i tried to save or activate the PC it throws this message "Add at least one process to the chain before saving"
What could be the problem here ?
Best Regards....
Sankar Kumar
+91 98403 47141Hi,
Please select <b>No</b> when it displays the message
Display More Chains:
Process Z_DELODS (type DROPCUBE) has already been used in other chains
Do you want these chains to be displayed in the maintenance screen too
Yes / No / Cancel
Include atleast one process after the start process before saving..
Hope this helps you... -
HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adilHI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil -
Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
P.S. I am able to sync postcasts and music though!http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014
Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension> -
HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!
Don't know if this applies to Lion, but read here:
http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/ -
On my IPad2 when i try to access facebook i get a message to go to settings and add my password. When I do this i get a ERROR SIGNING IN message saying could not communicate with sever!!
Hi Bendogel,
If you are having issues accessing iCloud, you may find the following article helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
- Brenden -
My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?
Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons. -
We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?
The updater wasn't able to update all the files and some were left as older versions.<br />
Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
XUL Runner, Error: Platform version 5.0 is not compatible with miniVersion =6.0 maxVersion =6.0
I get this error message when open Mozilla Firefox:
XUL Runner, Error: Platform version 5.0 is not compatible with miniVersion>=6.0 maxVersion<=6.0The updater wasn't able to update all the files and some were left as older versions.<br />
Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
After downloading Firefox version 6.0.2 launching get XUL Runner "Error: Platform version 6.0 is not compatible with minVersion>=6.0.2 maxVersion<=6.0.2
If using Zone Alarm's browser virtualization or any other similar product or a sand-boxing program (i.e., Sandboxie), turn it off when updating Firefox or Firefox Add-ons. You can post on the forum for any such product that you might be using to get other instructions on the proper use of the product.
The updater wasn't able to update all the files and some were left as older versions. Do a clean reinstall. See: [http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update Browser will not start up - XUL Runner error after an update]
#Download a fresh Firefox copy and save the file to the desktop.
#*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
#Uninstall your current Firefox version.
#*'''''Do not remove personal data when you uninstall the current version'''''
#*Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
#*See [http://support.mozilla.com/en-US/kb/uninstalling+Firefox Uninstalling Firefox] '''''and''''' [http://kb.mozillazine.org/Uninstalling_firefox Uninstalling Firefox (Mozillazine)]
#*Also see: [http://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information] '''''and''''' [http://kb.mozillazine.org/Profile_backup Profile backup (Mozillazine)]
#Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
#*It is important to delete the Firefox program folder/directory to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
#*See: http://kb.mozillazine.org/Installation_directory
#Install the fresh copy of Firefox that you downloaded in step 1 -
Error: Platform version '25.0' is not compatible with minVersion = 26.0 maxVersion = 26.0 HELP!
Hi All,
I keep getting this error message when opening Firefox on my computer. However, if I run it as an Administrator it works fine. I have uninstalled and reinstalled Firefox including downgrading to older versions and still no luck. This is the Error I get:
Error: Platform version '25.0' is not compatible with minVersion > = 26.0 maxVersion < = 26.0 edit
Any help would be greatly appreciated.If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.<br />
Other security software may have similar features to prevent Firefox from updating files properly.
See these pages for a similar issue with corrupted files:
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 26: http://www.mozilla.org/en-US/firefox/all.html
if possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
Any way I attempt to open new tabs, be it clicking on the new tab button or using the short-cut Ctrl-t, I am unable to open any new tabs on my browser window. The only way I have found that I can open a new tab is to right-click on a link and instruc
-
Not sure about the protocol, because I found the problem, the question above, and have already solved it, and wanted to get the info out. If a "<a ...>" link has the pathname split across lines, the link no longer displays correctly. Oddly, if you ri
-
How to deploy JAVA3D application
Hi All, I'm writting small Java 3D application and I wonder how can I deploy it like an exe file? Thx Eyal
-
Tone Curve Sliders Disappeared
My tone curve sliders disappeared in Lightroom 3 (exposure, recovery, fill light, blacks, brightness, saturation, vibrance). I have googled it and tried a few things with no luck. THanks in advance for your help! I am desperate to resolve this ASAP
-
Premiere pro cs3, limited compression choices.
Premiere pro cs3, windows 7 I'm trying to export my movies,but no matter what video choice I use, the program will only compress in millions of colors, which makes videos that are way too big to use. How do I get the other compression choices to a