BW client copy doc

Hi
I am performing the BW PRD TO BW DEV client copy (ver. 3.5) .Can any one suggest me what all are the post and pre processes and checks are to be performed before doing the BW CLIENT COPY. Any kind of STEP BY STEP DOC is welcomed, any weblink, pdf, site is useful.
Please guide me,
Thanks in advance
Gaurav Upadhyaya

Hi,
Check the links below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f022aa7d-0c01-0010-20a5-c247330d47fa
Regards.

Similar Messages

Post-install of SSM 4.0 and client-copy

We finished the installation of Sol. Man. 4.0 on a linux/oracle platform. At what point in the post install do we do the client copy of client 000 for data and client 001 for users to a new client? Before, during or after all the img config in 000?
thanks in advance,
Steven McElwee, Duke University
PS- Sap's install docs for SolMan 4.0 leaves much to be desired ...

Well, we had a chicken-and-egg issue here. Let me explain. By default, the SSM 4.0 SR2 install is at SP9, which gave it a somewhat simpler IMG. However, we gave in to the temptation of installing SP11 since this SPs were obtainable without Maintenance Optimizer, which gave us a more complicated IMG which includes, at some point, the client copy as mentioned above. We went through most of the IMG resulting from SP11 until we had Maintenance Optimizer working and then downloaded SP12.
I am in the process of installing the ABAP SP12 packages now and plan tomorrow to deploy the JAVA SP12 .SCA files. The IMG looks better and less confusing at SP12 than at SP11 or SP9. I think this calls for another IMG pass.
The $100 question - which parts of the IMG need to be done in client 000 and which to do in our client 100 (copied from client 000 after SP11 was applied). We are really confused on this point. If anyone can shed some light on this, i would very much appreciate it.
Sincerely,
Steven McElwee, Duke University

Client Copy (With Data/Cubes) Possible in BI 7.0?

Hello,
I am a basis team member (newbie and still learning) for my company and have been asked to copy our development cubes/data to our sandbox environment. We are attempting to do this through a client copy. I am using SCC9 with the SAP_APPL profile, but afterwards I do not see the cubes or any of the infoproviders etc in RSA1 in the sandbox. Is there a post processing step that I need to carry out to have this content show up or is a client copy not possible? We are trying to avoid a system copy if at all possible. Thanks for any and all suggestions/comment/help. Don't worry, I will award points for helpful answers :).
Thanks,
Rob

Hello,
See these docs,
[System Copy Procedures |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50960d8f-6542-2a10-3ba8-e46dc23dd9b1]
[System Copy and Migration|System Copy and Migration ]
[Setting up Business Intelligence Client in NW2004s|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/007af9a7-e48e-2a10-5c85-fcac22d58e82]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 ABAP and Java|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200ebc93-dabe-2910-c1a6-c4ec30b20e04]
[Homogeneous and Heterogeneous System Copy for SAP Systems Based on SAP NetWeaver 2004s|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f022aa7d-0c01-0010-20a5-c247330d47fa]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR1 ABAP|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d10bf27d-0c01-0010-6995-bbdcdf0118a1]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 ABAP|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e08502d4-dabe-2910-bbb4-c1bfc82aed73]
[System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 Java|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bd5cee-dabe-2910-fb97-c082a7c9c682]
Thanks
Chandran

Homogeneous system copy OR Remote client copy

Dear all,
We have SAP ECC 6.0 system running on HP Unix and Oracle 10g. This is a production system.
We would like make an exact replica of this system into a test system for several tests.
To achieve this, I think there are two ways.
Procedure 1.
a. Install ECC 6.0 in similar platform and creat a new client.
b. Perform remote client copy from production system to new test system.
Procedure 2.
a. Perform homogeneous system copy.
Could you please tell me which procedure would be the best one? and also we would like to know SAP Guide on how to perform this procedure.
Thank you.
Regards,
Prashanth.R.G.

Hi Prashanth,
Perform homogeneous system copy is the best solution for your requirment.
For Procedure for homogeneous system copy look below link.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6945da7d-0c01-0010-1792-dd7b5d87235c
Regards,
Krishna Reddy

Create a new Client Copy Profil

Hi,
is there a standard application to add a individual client copy profil to table CCPROF ?
Reason: The client copy via TDMS does not copy the report variants ( note 1159279 ). So I would like to transfer only variants with SCCL or SCC9. The ABAP RSTRANSP creates a transport order with ABAP variants but ignores variants of queries.
Regards
p121848

I don't think so.
About the variants read,
https://cw.sdn.sap.com/cw/docs/DOC-44242
Regards
Juan

BW client copy

Hi gurus
I am going to do the client copy of BW-PRD system, what all are the dos and donts which have to taken care before and after doing the BW-Client copy .what all are the steps and procedure to be follow for doing the BW client copy. Any type of link, docs supported are welcome
Issues to be covered under this are:
Issue no 1. Whats going to happen to the developed cubes/ODS which are present only on DEV server and not on BW-PRD server. Whats going to happen to them at BW-DEV server?
Issue no 2. As various other dev clients are connected to BW-DEV server whats going to happen to the source system present at BW-DEV server and there connectivity with each other. As on BW-PRD server its only connected to SAP-PRD server .so what going to happen with the connection at BW-PRD level.
Issue no 3. What all are the setting and configuration going to redo after doing the BW client copy.
Please suggest your views and guidance against the above mentioned issues .any type of links, docs are welcome.
Gaurav upadhyaya

Please stop posting the same question more than once!

Tables SXMSCLUP and (R) in client copy

Hello everybody,
last week we have created a QAS system from a DEV system by het.sys copy.
But in our DEV system we are using mandt 300. But in our QAS system we want to use
mandt=200 instead.
After doing the client copy, not any entry was copied to the new client.
Thanks in advance for your help.
Toni

Hi,
This may help u-
Copying a New Client
Also this installation guide may give some inputs-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
Regards,
Moorthy

Local Client copy - help needed

Hello ,
I have to perform a client copy without data.
Can you please let me know, which profile I should use ?
SAP_ALL All Client-Specific Data w/o Change Documents
SAP_APPL Customizing and Application Data w/o Change Docs
SAP_APPX SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST Customizing
SAP_CUSV Customizing and User Variants
SAP_CUSX Customizing w/o Authorization Profiles and Roles
SAP_PROF Only Authorization Profiles and Roles
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
SAP_UONL User Without Authorization Profiles and Roles
SAP_USER User Master Records and Authorization Profiles
Thanks in advance for your help!
I would vote for:
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
Daniel
Edited by: Daniel_Bul on Mar 7, 2012 11:22 AM

Hi,
SAP_CUSX would be better if you dont want the same user master data in both the clients otherwise you can go ahead with SAP_UCSV .
Regards,
Nirmal.K

Client copy,customer systems

The delivery class controls the transport of table data when installing or upgrading, in a client copy and when transporting between customer systems. The delivery class is also used in the extended table maintenance. what is client copy and customer systems?

2 possibilities:
client export/import: tcode SCC8 (then important transport with STMS)
remote client copy: SCC9 (after creating RFC connection through SM59)
all docs are available in help.sap.com

Does client copy erase all the data in the target client or?

hi
experts
does clientcopy erase all the data in the target client or except user master records.
regards
rajendra.

It depends upon the profile you use for the client copy.
if you use SAP_ALL
All data is deleted from target client and source client data is copied.
and therefore you shall see the profiles and understand them .
SAP_ALL    All Client-Specific Data w/o Change Documents
SAP_APPL   Customizing and Application Data w/o Change Docs
SAP_APPX   SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST   Customizing
SAP_CUSV   Customizing and User Variants
SAP_CUSX   Customizing w/o Authorization Profiles and Roles
SAP_PROF   Only Authorization Profiles and Roles
SAP_UCSV   Customizing, User Master Records and User Variants
SAP_UCUS   Customizing and User Master Records
SAP_UONL   User Without Authorization Profiles and Roles
SAP_USER   User Master Records and Authorization Profiles
Hope it helps.
Thanks
Amit

Create Client copy only with Master data

hi friends,
we are going for SAP Re-Implementation.
we want client copy only with master data without having transactional data
Is it possible to copy the master data from production to production.
can we transfer the data using ALE/I DOCS...?
Is there is any standard BAPI to transfer data across client....?
if there is any solution please give me guidance.
i have searched in SDN and SAP technical but i can't find the proper solution.
Thanks in advance.
regards,
karunakar

Hi Karunakar,
1) Make a client copy ready 2) Use Idoc and moved the master data. I am not sure how much data it is.We did the same before.
Check these links form Peter.
[TDMS|http://204.154.71.138/images/whiterhino/fp/tstsym5/testdatamigrationserver.pdf]
[TDMS Wiki|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b43e2b4d-0b01-0010-c191-cba32880cb95?QuickLink=index&overridelayout=true]
Regards,
Madhu.

Salesdocs not flowing to CRM following client copy

Hi
Copied our Production OLTP and CRM systems. Run BDLS on OLTP and twice on CRM so logical systems okay .
Regrest for sales document will bring down changed doc but no new docs coming down.
Been in and created filters again via R3AC1 in CRM.
TBE11 okay in OLTP system as is CRMRFCPAR, CRMPAROLTP and CRMPRLS.
Nothing is hitting the CRM system when a sales doc is changed.
What else can I look at ?
Regards
Melita

Hi,
Since you did a client copy i am assuming there must be logical system GUIDs issue in the system.
Could you please checks the following:
1. In CRM look for the table CRMMLSGUID. This should have the logical system name of the R/3 that it is connected to and also the GUID. To check if the GUID is correct cross check with GUID from R/3 table CRMPRLS.
2.In CRMRFCPAR in R/3 this will give you all the RFC connections that R3 is connected to. If you want to check whether the CRM RFC value is defined correctly compare it with RFC destination in the Admin Console (smoeac).
If these are not matching then the systems are not linked correctly. We did the client copy and had issue with the logical systems.
Thanks,
Karuna.

Logical System and Client copy

Hi Gurus ,
             I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
Selvan

Hi Manjula ,
              Below i mentioned the full detail about the error .
    RFC destination for client copy in systems with Financials Basis     (FINBASIS) component.
The system could not find any suitable RFC destination for processing     for client 000.     This note also appears if an RFC destination was found but this does not     work.     o   RFC destination: FINBTR@ID3CLNT000     o   Error text: Error during the retrieval of the logon data     Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection     or perform the following steps manually:     1. Create an RFC destination with the target ZK>source client of client         copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59.         To avoid errors when assigning the password or the authorizations of         the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination:         -   Transaction: FINB_TR_DEST (Destinations for Transport Methods of             the Financials Basis)         -   Client: 000
4. Start the client copy again.
Kindly advice me
selvan

Client Copy from BWP to BWT

I had a problem with my List Cube Transaction and for that reason, I had a look at the Infoprovider and also the Data Sources.
When tried to execute the infoproviders in LISTCUBE, the following messages are being displayed in BWT system:
1. Error reading the data of InfoProvider ZIP_RC_01
2. There is still no data source assigned to VirtualProvider ZIP_RC_01
But, when executed the same in BWD, then it is working fine.
I have checked the Data Sources in the R/3 Dev system and the DS has no problem. But, when I check the DS in the R/3 Prod (SS in BWT system), the following error message is displayed in the status bar:
"DataSource Z_IP_RC_DS_1 is not defined in the source system"
I thought, as the system says the Source system is not available, hence the problem in LISTCUBE and thought if we transport the DS again and then replicate in BW, then our problem would be resolved.
But, seems that even though the source system says "PRD300", if I look at SM59 it actually points to our QAS system. It says PRD300 because BWT is a copy down from BWP, and that's the source system we use - in other words the logical name is the same, but the actual servers are different.
In any case, the datasource is transported to our QAS enviroment.
So, once we do a client copy from Prod to Test, even the source systems get copied. If yes, then does it really affect in case of replications and transports???
I am really confused in this part...please explain.
Thanks & Regards

Hi,
It looks like the basis team, or whoever performed the Copy from production to QA box hasn't finished all the necessary Steps :
Main transaction to know:
SSC4 -> To create new client
SCCL -> Client copy within local system
SCC9 -> remote client copy
SCC3 -> display client copy log
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci552257,00.html
Probably sounds like transaction BDLS hasn't been done.

Client copy with configuration data in R/3. Is there any effect on EBP sys

Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advance

waiting online

BW client copy doc

Similar Messages

Maybe you are looking for