BW code page error for receiving sysem.

Hi friends,
We are getting following error in BW when We are trying to load data:
"Could not find code page for receiving system",
Our BW is Unicode and the R/3 is nonunicode
Referred to the OSS notes 784381 and 613389
We have checked we21, we22 and logical system and rfc connections and done the following bit checked :
Language “EN” is specified in sm59
Under Special Options -> RFC Bit Options
Made sure that “Use Found Communication Code Page” has a check mark.
We keep getting the following error...
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination BRQCLNT500, you want to determine the code
page in which the data is sent with RFC. However, this is not currently
possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed.
3. The logon language is not installed in the target system.
Please help   and I will definely reward points.
Thnaks

hi Brent,
try to check the S10010 source system, rsa1->source system->righ click 'check'. also check the connection and authorization for S10010 in sm59 ? you may need to restore, source system S10010 right click 'restore'. hope this helps.

Similar Messages

  • Error in code page mapping for Source system whil loading the data from ECC

    HI Gurus,
    I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
    In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
    Please let me know if there are any settings needs to be made.
    Many thanks in Advance
    Jagadeesh

    HI V,
    Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
    Do we need to do any settings in LBWE??
    Thanks and Regards
    Jagadeesh

  • Error in code page mapping for Source System

    Hi All,
    We are Loading data into BI system from MDM System.
    It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
    Message Class: RSDS_ACCESS 13.
    We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
    Any pointers for this error will be Helpful.
    Regards,
    Mayank

    Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
    any advice.. ?
    Edited by: Edi Erwan  Abu Talib on Jun 22, 2009 8:22 AM

  • Code page of the receiver system could not be found".

    Hi,
    We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
    What could be the reason for this error?
    Because of this error all IDocs are getting stuck in XI.
    Kindly help.
    Thanks,
    John

    Hi john,
    Have a look at this thread:
    "Could not determine code page" inbound side error
    This could be usefull.
    Carlos

  • File to IDOC : Code page error

    Hi
    I am working on Scenario  File to IDOC.
    T90CLNT90 is the rfcdest for SAP R3 System from XI.
    The file sender succesfully sends thefile to the XI Engine.From XI to R3 the adapter fails to send the idoc.
    What could be the reason for code page error?
    I am getting following eror.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
      <SAP:P1>DB Tab RFCDES: Could not determine code page with T90CLNT90</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error: DB Tab RFCDES: Could not determine code page with T90CLNT90</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Regards,
    Prashanta

    Hi,
    Check if T90CLNT90 exists in SM59 transcation I think it should be T90CLNT090.
    Also check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/beb13b00ae793be10000000a11402f/content.htm
    Thanks,
    Prakash

  • Customer Conversion-"Incorrect Code combination id for Receivable account"

    Hello experts!!
    I have created the customer conversion program the customers.
    All customers are getting loaded into the base table properly as expected . But for few customer it is throwing the below error:
    "Incorrect Code combination id for Receivable account"
    I have checked all the setups related things upto my knowledge everything is perfect.
    Could anyone help me out what would be the cause and how can i fix this error.
    Waiting for your valueable reply..
    Thanks,
    Thiru.

    As per the message, identify one of the failed records and retrieve the code combination used. From there you can validate that a) the id exists for the LE on the gl code combinations table and b) that it passes whatever cross validation rules are enabled for the organization.

  • Code Page Error When Upgrading to SAP BW SP15

    Hello all.
    We are upgrading from SAPBW SP12 to SAP BW SP15.  We have already successfully implemented Unicode.  When we run InfoPackages now, we get the following error:
    ======================================
    Could not find code page for receiving system
    Diagnosis
        For the logical destination S10010 , you want to determine the code page
        in which the data is sent with RFC. However, this is not currently
        possible, and the IDoc cannot yet be dispatched.
    System response
    Procedure
    Procedure for System Administration
        Possible causes are:
        1.  The entry no longer exists in the table of logical destinations.
    2.  The target system could not be accessed.
    3.  The logon language is not installed in the target system.
    ========================================
    We are not getting any short dumps.  Just this error message.  HAs anyone seen this before?  Do you know of a SAP Note or Solution that addresses it?  I appreciate any help you can give.
    Thanks,
    Brent

    hi Brent,
    try to check the S10010 source system, rsa1->source system->righ click 'check'. also check the connection and authorization for S10010 in sm59 ? you may need to restore, source system S10010 right click 'restore'. hope this helps.

  • "Could not ascertain code page" Error.

    Hello,
    I have created an program for getting FI docs from BSEG table and downloading into excel file after doing some processing on the fetched data. The job, if run as a dialog process, works ok. But if scheduled to run in the background, gives the following error.(viewed through SM37).
    Job started                                                                         
    Step 001 started (program ZFI_BUSINESS_AREA, variant &0000000000003, user ID LSMW_FI)
    Could not ascertain code page                                                       
    Job cancelled after system exception ERROR_MESSAGE                                  
    Any help is appreciated.
    Thanks.
    N.K.Verma.

    It is soooooooooooooooooooooooooooooooo difficult to understand:
    SAP is a client-server-system. Online means that you can DOWNLOAD something from SAP server to client PC.
    There is no such thing like a background client PC.
    PERIOD.
    -EOF-

  • Code page of the receiving system cannot be found?

    Hi,
    I am sending Idocs from SAP ECC 6.0 System to Siebel System for message type ORDERS. All the idocs are failing and are in 02 Status.
    We have already implemented OSS Note mentioned for this particular error, but still the error persists. So, can you one let me know what could be the reason why Idocs are failing and what needs to be done in order to avoid this type of error in future once again.
    Raghuram.

    Hi john,
    Have a look at this thread:
    "Could not determine code page" inbound side error
    This could be usefull.
    Carlos

  • Cyrillic fonts (Russian Code page) error at native email message client on PB (when replying on gmail)

    Hi, everyone.
    I've an error with russian code page when replying e-mails from native message client on PB (tested at gmail account).
    It looks like code page of replying text at outgoing message changes:
    Windows (1251) -> KOI-8R
    and become unreadable.
    Images with error description:
    http://imageshack.us/photo/my-images/32/26281431.j​pg/ 
    Mirror:
    http://s2.postimg.org/pu7eqbj21/image.jpg
    Does anybody have this problem and solution?
    Thanks for any help.

    Hi, everyone.
    I've an error with russian code page when replying e-mails from native message client on PB (tested at gmail account).
    It looks like code page of replying text at outgoing message changes:
    Windows (1251) -> KOI-8R
    and become unreadable.
    Images with error description:
    http://imageshack.us/photo/my-images/32/26281431.j​pg/ 
    Mirror:
    http://s2.postimg.org/pu7eqbj21/image.jpg
    Does anybody have this problem and solution?
    Thanks for any help.

  • Could not determine code page Error in remote sys in XI

    Hi,
    When we try to send some IDOCS from ECC 5.0 sys to 4.6C sys via XI (M70) we are encountering below issue.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
      <SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with XXXXX system I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with XXXX I::000 FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    When i checked table TCPDB is empty in 4.6 C system. Does it ring any bells guyz....
    Regards
    Vish

    Hi,
    Check out this thread
    "Could not determine code page" inbound side error
    XI IDOC Error...
    Thanks,
    Prakash
    Message was edited by: Prakash Arunachalam

  • Code page conversion for chinese characters

    Hi,
    we receive an XML via JMS sender adapter where the code page in the Sending MQ system is cp850.
    One tag we receive contain chinese characters but are encoded as below
    <FAPIAO><Title>马么</Title><Remark>*æ¤，波特肉*</Remark></FAPIAO>
    We have tried the messageTransformBean in the sender JMS adapter to convert into UTF-8, but that gives no change.
    If we use some other code page, BIG5 some of the characters are converted to chinese characters, but we need to have it as UTF-8.
    Is this possible or do we have to use some other codepage?
    Best Regards
    Olof

    Olof Trönnberg wrote:
    Hi,
    we receive an XML via JMS sender adapter where the code page in the Sending MQ system is cp850.
    One tag we receive contain chinese characters but are encoded as below
    <FAPIAO><Title>马么</Title><Remark>*æ¤，波特肉*</Remark></FAPIAO>
    XML has to be transported as binary always.
    Remove the encoding parameter in comm. channel.
    Besides: obviously this is UTF-8, so how can you say, the code page of the sending system is cp850?
    It seems, that you have a wrong information.

  • Vendor Code 6502 error for SQL pane of existing View

    When I am in the SQL pane of an existing valid view, it hangs saying "Generating DDL....". When I cancel, I get the vendor code 6502 error - the View is a simple select from a Materialized View. We have other Views that select from the same MV, but have no problems showing the View source in the SQL pane. . ( I can see the view source with no problems using Toad). Any ideas ?
    Thanks,
    Anne

    Hi rkonno!
    The ORA-904 tells you that PROJECT_PROGRESS is an invalid identifier. Is this the correct columnname?
    yours sincerely

  • Code 10 error for 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter'.

    Last week, i tried setting up hotspot manually using CMD window. But it failed and the system stopped detecting wifi altogether. i tried installing the driver 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter' but it shows up 'code 10' error after installing it. Please suggest suitable measures to restore wifi connections.

    Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

  • Code 10 error for touchscreen using windows 8

    We have a HP 42" monitor (LD4200tm) and the touchscreen feature does not work and we have a code 10 error - device not working. The panel works fine using Windows 7 and the drivers appear to be the most updated.

    Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

Maybe you are looking for