BW connections in SAP Portals after system copy

Hello,
A system copy was made on BW and R/3 systems (production backups where copied into development environments).
After the copy, the BW reports in SAP Portals no longer execute, message "The requested resource does not exist" is shown. Does any body knows why? Is it possible that an RFC destination is missing?
Regards,
Sónia

Hi Peter
Did you get the solution for this problem?
If yes give the solution.
Regards
Niranjan

Similar Messages

Unable to log in to portal after system copy

Good day
I have copied my production portal system to a test system. I am using an ECC Abap system as my user store. The portal start successfully and I am able to access the Visual administrator.
I am however unable to log on to the portal. The error I get is "User authentication error".
Below is an extract from the security log:
#1.5#0011259C05FB0054000002F500001B9800043F56F6157AED#1195542635224#/System/Security/Authentication#sap.com/irj#com.sap.engine.services.security.authentication.logincontext#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module                                                            Flag        Initialize Login      Commit     Abort      Details
com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false      true
com.sap.security.core.server.jaas.CreateTicketLoginModule               SUFFICIENT ok          false      false      true
com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true       true
com.sap.security.core.server.jaas.CreateTicketLoginModule               REQUISITE   ok          true       exception true       null#
#1.5#0011259C05FB0054000002F700001B9800043F56F61580BC#1195542635240#/System/Security/Audit#sap.com/irj#com.sap.security.core.util.SecurityAudit#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest     | LOGIN.ERROR     | null     |      | Login Method=[default], UserID=[oostw], IP Address=[172.27.2.137], Reason=[Access Denied.]#
Please can someone assist.
Thanks
Wilhelm

Hello!
It looks like your system is configured for ticket authentication. As you did a system copy the SSO-ticket might not be working anymore. If this is the case you need fix the SSO or you need to re-configure your Portal (at least temporarily) to allow other authentication methods (like basic password authentication).
You can configure the order of the authentication methods in VisualAdmin and set the 'levels' (Required/Sufficient/etc.) there as well.
Hope this helps,
Jörg

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

Errors after system copy ...

Dear all,
envi---         AIX 5.3 & oracle 10.2 -
ECC 6.0SR1    ABAP ........only
I have restored a backup of PRD to QAS successfully ... for system copy...
I have created ops$ users with following statments..
create user ops$qlyadm identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( sidadm)
create user ops$oraqly identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( orasid )
Successfully created control file & managed to take the database up...
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1728053248 bytes
Fixed Size                  2071840 bytes
Variable Size             872415968 bytes
Database Buffers          838860800 bytes
Redo Buffers               14704640 bytes
Database mounted.
Database opened.
SQL>
after the following action when i tried to startsap. with user sidadm the following is the message..
Checking QLY Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
Start of saposcol failed
Running /usr/sap/QLY/SYS/exe/run/startdb
Trying to start QLY database ...
Log file: /home/qlyadm/startdb.log
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
athomedev:qlyadm 26>
As a result when i checked startdb.log the following is the message.......
Fri May 29 16:03:32 IST 2009
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 29 16:03:32 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09967: unable to create or open lock file
IBM AIX RISC System/6000 Error: 13: Permission denied
Disconnected
Fri May 29 16:03:32 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
Request to advice me on the following & also advice me the way i created ops$ users is that right way or not..
rgds,
rahul...
Edited by: Rahul on May 29, 2009 4:21 PM

Dear all,
thanx for sharing,, I have actually odnea mistake after system copy. I tried to make the system up with out creating ops$ suer.
I have followed notes
361641 Creating OPS$ users on UNIX & created ops$ created ops$ user with automated script & from attchment provided in Note 50088 - Creating OPS$ users on Windows NT/Oracle
after that
alter sytem sapr3 account unlock;
system is up & runnig.
regards
ravi kiran

J2ee engine does not start up after system copy

Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
        at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
        at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
        at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
Tajinder

Hi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments   :
    arg[00] : jcontrol
    arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[02] : -DSAPSTART=1
    arg[03] : -DCONNECT_PORT=64380
    arg[04] : -DLISTEN_PORT=64381
    arg[05] : -DSAPSYSTEM=00
    arg[06] : -DSAPSYSTEMNAME=BD1
    arg[07] : -DSAPMYNAME=BWQAS_BD1_00
    arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[09] : -DFRFC_FALLBACK=ON
    arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host    : BWQAS
-> ms port    : 3601
-> OS libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : BWQAS
-> ms port    : 3601
-> os libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm                  : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
        Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name       : bootstrap
-> node type       : bootstrap
-> java path       : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type    : <default>
-> java vm cpu     : ppc64
-> heap size       : 512M
-> root path       : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path      : ./bootstrap/launcher.jar
-> OS libs path    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class      : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable      : yes
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder

License Error after system copy

Hi,
     After system copy licensing the sap giving this error.
MLICHECK0 in *LIBL type *FILE not found.
MLICHECK__0 in *LIBL type *FILE not found.
MLICHECK~I1 in *LIBL type *FILE not found.
MLICHECK in R3BDDDATA type *FILE already exists.
Alternative name for file MLIC0002 not allowed.
"MLICHECK~0" in R3BDDDATA type *FILE already exists.
Help me to solve the issue.
Thanks and Regards
G Singh

Hi G Singh,
this error message "smells" extremly like RCLSTG *DBXREF !
If this problem is still your pronblem, I would run this command - in restricted mode - takes only about 30-60 minutes ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

After system copy u0131 see PSAPTEMP size is 0 from db02

hi
our system is sap ecc6 on oracle 10g (aix 5.3)
after system copy ı see psaptemp table size is 0.original size is 2gb from prod system
using brtools ı added a new file for psaptemp then ı did a stop/start and ı saw 2gb for psaptemp
ı checked file location for psaptemp in file system that it is ok.
after every system copy should I did this action ?
have you got any ideas?

Hi,
Sounds like you did a tape restore from prod to QA
Did you use alter database backup controlfile to trace from your prod system for the rebuild ?
At the base of the trace file there would be the syntax to create the PSAPTEMP file.
Looks like you have deleted that bit....
No big worries if it's missing as long as you put it in before using the system in anger....
Put in your notes to add the PSAPTEMP file in after you opened the database sucessfully.
Mark

Delete QCM tables after system copy

Hi All,
Is it possible to delete QCM table after system copy using backup/restore procedure.
Regards
RM

Dear Rajat ,
QCM Tables should be deleted before starting the migration ,
check the following SAP note
9385 - What to do with QCM tables (conversion tables)
to delete QCM tables. call transaction SE14 and select 'Extras->Invalid temp. table' in the menu bar This displays all the QCM tables that can be deleted. You can highlight these and choose a pushbutton to delete them
Best regards
AhMeD

RFC users locked after system copy in production system

Hi,
BW_User,MDBTC(RFC users) system users were locked in our BI Production system at the same time system copy activity was running in the Quality system(production to quality) so as per our colleagues concern after system copy they started Quality system with out changing background work-process 0 so some jobs were triggered which were copied from production system.
Is there any cause to lock RFC users in production system for system copy? If there is any other reason where we can check logs
Thanks
Jalandhar Reddy

Hi,
Well maybe i am wrong to analyze your problem .
Anyway I faced this issue to in our system before and we found that one background job was running in a system that has basically prompting an RFC connection to another system. In the t.code SM59 and there was wrong password was put in.We just reset the password and it was worked fine.
You can try for this..
Regards
Bhuban
RKFL

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

Problem in connecting to Sap R/3 system through Crystal Reports

Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advance

you need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added

Accounting document not copied after system copy.

Hi,
We copied the production system into our test system using backup/restore. In the post copy verification, our CO team complained because they could not see the "accounting documents".
What do you think happened why the accounting document was not copied?
thanks
krbas

Hi Krbas,
Make sure you did all the post processing activities after system copy. I doubt you missed some post processing activities related to CO after your system copy.
regards,
VInodh.

User password problem in RFC after system copy

HEllo,
we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
Have you an idea to reimport succesfully these informations ?
Thanks
lionel

Hello,
We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
This are exactly way we perform it:
Before restoring DB :
export table via R3trans for tables:
RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
export users via scc8
Restore DB, truncate upper rfc tables, import rfc Tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
Import Users via transport generated by scc8
run scc7 as post actions
Tuncatate/re-import rfc tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
What else could be done ?
We have a lot of RFC. so re-enter all password is really a hudge task ..
Thanks a lot for help

Cube is still assigned to original system after system copy

Hello Experts,
After system copy (BW and ECC), some cubes are still assigned to the original system.
Displaying the flow, the cube is assigned to the new system and the original one and the error message RSAR203 "Source system & (old one) does not exist" is araised.
I see that RFC connexion with original system are still in the system (were not deleted by basis team).
I have this problem only for cubes.
Any idea how can i fix this issue?
Thank you in advance.
Edited by: SALHI Amal on Oct 13, 2011 11:37 AM

HI,
You can try the tcode 'bdls'. in this tcode you copy all tables to new source system.
Regards,
AleX

BW connections in SAP Portals after system copy

Similar Messages

Maybe you are looking for