BW Cubes transition to BI cubes for IFRS.... ?

Hello,
Client says they currently have reports coming out of standard SAP BW cubes and reports and they would like to transition to SAP BI cubes and reports. Do you anyone has similar experience like this? transition in the sense, they want to build customised cubes ?
I think IFRS is more of some configuration to the ledger accounting... what does it means to a BW developer..??
Please throw some light..
Regards,
schenider..

Hi guys
Any thoughts?
Thanks,
Chris

Similar Messages

3D Cube Transition

Hello guys,
i want to know this for a long time.
How can I make a 3D Cube Transition (like that in Linux or
MAC desktop) to use with MovieClips.
Go see this component
here.
I hope that you can help me making this.
Compliments.

You need both channels of the ADO to make a proper cube spin.
Sorry, that's an inside joke.
While I'm no cube spin expert, I just looked at the effect and if you double click on it you will notice there are some controls you can modify, such as the spin direction and whether you view the spin from an inside or outside perspective. Make sure you haven't modified these.
As far as smoothing it out, it doesn't look like that's an option.
In regard to opening the project and then having the effect no longer function as it did prior to closing the project, I would suggest you trash your preferences.

Using an SAS2008 Cube as a data source for BI Publisher errors

Hi All,
I am trying to use a SAS 2008 cube as a data source for a report in BI Publisher. When I defined the data source under the admin section I gave it the following details:
Data Source=ntsasqa01;Provider=msolap.3;Initial Catalog=WWPR_SMG
With a username / password that has access to the cube.
When I try and test the connection the OC4J instance stops running and the test does not finish or error. If I use the data source and then setup a report and then try and view data I get an error like the one below:
/app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll ( 0509-022 Cannot load module /app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll.
0509-103 The module has an invalid magic number.)
I am not sure if the error is related to the initial issue of not being able to complete the test.
I need to find a solution though as I have to make use of MDX to access the cubes.
Please could someone give me some advice.
Thanks,
Kim.

Hi Kim
1. SAS cubes are not currently supported - http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf. Unless SAS cubes can use the MS drivers?
2. If you try and pursue it you might check the permissions on the ddll in the error to ensure you have rights over it.
Either way you are not supported with a SAS cube so you are kinda on your own. Sorry I dont use SAS so Im not going to be much help other than stating the obvious :0)
Regards
Tim

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

Smoothing out 3D Cube transition

I am using the 3D Cube transition that comes with Final Cut Pro. I am having two issues.
1. If I place the effect at the end or beginning of a clip, it will initially show the cube effect with the clip on the lower track, but when I reopen the project, it reverts to a flip-looking effect. Works fine between two clips
2. I have tranistion length set to 20 seconds--and it looks abrupt, like it is popping into place. Is there a way to smooth it out, so that it appears to gently come to the next clip? With the my previous edit system you could adjust the "tension" of the effect. Do 3rd Party 3D effects give more control?
Thanks.

You need both channels of the ADO to make a proper cube spin.
Sorry, that's an inside joke.
While I'm no cube spin expert, I just looked at the effect and if you double click on it you will notice there are some controls you can modify, such as the spin direction and whether you view the spin from an inside or outside perspective. Make sure you haven't modified these.
As far as smoothing it out, it doesn't look like that's an option.
In regard to opening the project and then having the effect no longer function as it did prior to closing the project, I would suggest you trash your preferences.

Cube Transition Stutters when playing slideshow on 17" MacBook Pro

Hi,
Hope someone can help me here
I have just purchased a new MacBook Pro 17"
Have installed the Latest updates and everything runs okay
Except, when performing Cube Transitions During a Slideshow, they Stutter when turning, all the other transitions are fine.
It`s as if the Frame rate had dropped to about 6fps
I had a 15" MacBook Pro before this and they were as smooth as silk on that one
I Imported all my Stuff from my old MacBook during setup
is it possible that is were the problem lies!

Fixed itself

Cube to Cube vs ODS to Cube good for loading performance

BW Experts,
I have an option of loading from Cube to Cube or ODS to Cube. It has data in 20 m records.
So in terms of performance of loading perspective, which one is better..
Thanks in advance,
BWer

Hi,
of course (but you didn't mention that the level of detail was different) it's depending on if there's alot more data in the DSO than in the cube.
A DSO is 1 table which is easier to extract data from and build additional indexes on to speed up load time.
The Info cube is as you know more compelx built with the multi dimensional model.
Kind regards
/martin

Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.

Hi,
My query is built on multiprovider. The data flow is data source u2013 ODS then ODS u2013 Info cube and multiprovider contains Info cube only.
Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.
The query results are not tie up ODS, Info cube ans Multiprovider(List cube).
Any one let me know why this is happening and how do I resolve it.
Regards,
Sharma.

HI;
thanks for help.
I resolved the issue in my own.
Regards,
Sharma.

MultiProvider Created from #.5 cube and 7.0 Cube

I have one global cube created with update rules and transfer rules and everything, the way we create in BW 3.5 (Delivery)
I have another newly created cube using BI 7.0 (History Delivery data) with Transformation and the DTP.
I have created one Multiprovider combining this 2 cube. The 1st cube contains all the data for Delivery with Material, Plant, 0MAT_PLANT and Delivery quantity and dates and other things as per the requirement. This is a cube to be used going forward.
The 2nd cube contains only Delivery data from legacy system loaded in to this History cube from Flat file. This cube only has 0Material, 0Plant, 0MAT_plant, Delivery Qunatity and the requested date.
Now the Multiprovider has common chars and KFs from these 2 cubes.
When I run the query on this MultoProvider to see results of past 12 months (Requested Date) excluding current month with quantity. I get only the results from the 1st cube. I have created test query on both the cubes individually and I get results on both those queries but when it comes to MP it just gives from the 1st cube which is created in BW 3,5.
Now My questions are
1) Does it make any difference for MP if one of the cube is in 3,5 and other in 7.0 ??
2) If No then what else could be the problem. I have checked the Data both of them look identicle and correct as far as I think unless I have made some basic error??
Please help. Will provide points.

Is it required that I have to select the particular InfoProviders under the DataPackage under Characteristics for the QUERY??
If you wish to see the data in the query that is stored in a particulat cube that form part of the multi, then you could.
Was I creating query the wrong way? I want to know the reason, It did work but I want to know the logic though.
No. it is wrong. But, if the query does not read data from more than one cube, but if you create it to run from multi cubes, then query response time may suffer.
Ravi Thothadri

Creating a Summary Cube from Line Item Cube

Friends,
1. I have a GL Line Item cube that gives me item level information
2. As I needed to create a summary cube I copied line item cube adjusted dimensions (removed Line Item) and activated it.
3. When I loaded the summary cube from Line Item cube I got same number of transactions
What have I missed? I want to summarize the info at GL Account level; or at any other info object level.
I have done this before but it did not work this time. I think I have missed a step.
I will be looking forward to your recommendations!
Thanks for reading this!
Ram

Hi,
Just removing tick against Line item will not work. You have to remove that characteristic from the cube. As this characteristic is High cardinality , you need to remove it from he cube.
Decide at what level you want to have aggregated data and keep only those characteristics in the cube.
Regards
SS

Inventory SnapShot Cube and Daily Load Cube

Our requirement from the snapshot cube is to provide queries which show end of month balances similar to as what is shown if I run queries from the Standard daily cube (0IC_C03).
The scenario is as follows:
Query requirements are to show ending balances for the period:
Details are as follows
1) I create a query based on the 0IC_C03 cube, the characteristics are say for example plant and fiscal period and the key figure is Quantity Stock
The results will display the balance at the end of each period so for example
The Key Figure in this cube is non cumulative and is 0TOTALSTCK
Period: 01 Quantity: 0
Period: 02 Quantity: 5
Period: 03 Quantity: 8
Period: 04 Quantity: 2
Period: 05 Quantity: 2
Period: 06 Quantity: 2
Period: 07 Quantity: 2
2) I create the same query off a version of the SnapShot cube as defined in the How to Inventory guide
The results displayed are the movements (changes)
Period 02 Quantity: 5
Period 03 Quantity: 3
Period 04 Quantity: -6
Has anyone got a solution so that I can have the same result set for example 2 than what I get in example 1?
At the moment the approach I plan to take is to datamart 0IC_C03 and work with the cumulative key figures which are used in 0TOTALSTCK. I would like thoughts on this approach and solutions otherwise. Thanks

hi
You have to compare the exception aggregation set for every key figure and the defined time charecterist
Regards
N Ganesh

How can I extract non-cumulative cube data to another cubes ?

Dear Expert,
         I copied inventory cube 0ic_c03 to a new cube : ZIC_C03 , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 .
the loading was sucessful, but the result of report of the ZIC_C03 was not correct. After looking into the problem, I found out
the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
         I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
,and the note was not mentioned valid for BW 3.5 release.
         How can I extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20?
   Thanks !

Hi,
Check Routines in Update rules wether same code is wrriten in new cube
cheers,
Satya

Performance of Financial Reports against a ASO Cube to a BSO Cube

Hi All,
I am working on Financial Reporting and Essbase. I wanted to understand and find some relevant documentation, which tells about the performance issues or difference when a financial report hits a BSO cube or an ASO cube.
1. If there is a difference in the performance for an ASO vs BSO for Financial Reports, where can I find the document or details for it?
2. If there is a difference in the performance for an ASO vs BSO for Financial Reports, what is the reason for the same?
3. How can we improve the ASO performance for the reports?
Any insights for the same, would be highly appreciated.
Thanks
Ankur Jain.

Thanks Sean V,
Its quite amazing for me as well, and that is why I am trying drill into any of the FR documentation which might contain something like this. As of now,since I don't have access to the cube, I have nothing to add, nor have the insights to the cube, based upon which I could explain, more on the Cube and Outline design.
But as soon as I get the access, I will bring this back and have a discussion on the forum.
Thanks for confirming the same, of what I had been explaining to my Client side as well. Though, I still need some basis to explain and prove them exactly and a prototype as well, which might be needed as well.
Thanks,
Ankur Jain.

Is it possible to create a copy cube from business content cube

Dear Experts,
I have to create the new cubes which is a copy of Business content statistics cubes .
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

BW Cubes transition to BI cubes for IFRS.... ?

Similar Messages

Maybe you are looking for