BW Data Load error due to special char's

Hi Experts,
Our BW System is a Uni Code, Master data load din BW failed due to special chars, I corrected the field manually in PSA and loaded the
data.
But I would like to know the reason for failure.
Issue for failure is term SOCIÉTÉGÉN…..My understanding its French and BW should accept it…why is it failing?
Thanks in advance

Hi User,
The alphabet ' É ' which you have mentioned is a special Character.
To avoid this failure in future , Please add " É" this alphabet in RSKC t-code which would help to avoid
special characters.
Please revert in case you need any further details.
Thanks & Regards,
RDS

Similar Messages

Data Load Error due to Master data deletion

Hi,
While doing the transactional data load I am getting following error.
+Master data/text of characteristic ZFOCUSGRP already deleted Message no RSDMD138 +
ZFOCUSGRP is an InfoObject (with Text). Last week we changed the source system from CRM to R/3 during that time we deleted all the Texts in ZFOCUSGRP manually from the table.
This error is not happening always some time it load properly. I executed the RSRV for InfoObject ZFOCUSGRP and InfoCube still this error happening.
Is there any way to fix this error?
Thanks in advance.
Thanks
Vinod

check this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps..

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

Load failed due the spl char

Hello Gurus,
I am working on BW 3.5 version, While loading the data to different ODS's. The loads are getting fail becoz of the below error.
*Value 'PPS2AEGN16ZZZSFBA ' (hex. '505053324145474E31365A5A5A53464241A0 ') of characteristic 0MATERIAL contains invalid*
the problem with the above material value is it included space(blank) at the end.
For this i have included the FM 'SCP_REPLACE_STRANGE_CHARS' in the Transfer Rules to ignore all the special Char for the 0material Info object. but still i am facing the same problem.
Kindly let me know if there is another solution for this. or i am missing any thing.
Thanks and Regards
Edited by: KK on Aug 13, 2009 12:10 AM

Hello thanks for ur response,
Space is on the right side of the material. hope i can maintain at both left and right sides bcoz to overcome the problem in future.
what i hav to include for the same kindly let me know
Regards

Data Loader errors

I have been using data loader for large imports and have received two errors that are causing me issues:
The first error is from the log file and is: [main] Oracle Data Loader On Demand Import validation FAILED: String index out of range: -1
The second error is from cmd window when import is in progress: WARNING: Unable to connect to URL: https://secure-ausomxxxx.crmondemand.com/Services/Integration;jsessionid=38dd67911f7fxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx due to java.security.PrivilegedActionExcep
tion: javax.xml.soap.SOAPException: Error parsing envelope: (2, 7110257) Invalid char in text.
What characaters are considered invalid in a csv file?
What does String index out of range: -1 error message mean?
Thanks in advance for your help or suggestions.
Edited by: user572322 on Dec 6, 2010 12:41 PM

Hi
Have you checked the length of the data with regards to the field type?
That might cause that error.
Thanks,
Mayank

Data load error for master data

hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1

Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps

Material Master Data Loading Error

Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
    Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
    Process :   If this message appears during a data load, maintain the attribute in
                     the PSA maintenance screens. If this message appears in the master data
                     maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
   Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik Shah

Hi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
    Data record 261 & with the key '000000000000132559 &' is invalid in
    value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah

Flat file data loading error using process chain

Hi SAP Experts,
I am having a problem loading the flat file data to the cube using process chain. The issue is that when i run the process chain it fails giving the message " Date format error, please enter the date in the format _.yyyy" . I am using " 0calmonth in the datasource" . Strange is that when i manually execute the infopackage, i dont get any errors and am able to load the same file successfully to the dso and the cube. Is there any special setting for the process chain that i am missing?
The date format in the flat file is mm/yyyy. I have tried all the options i could including recreating the datasource and invain dont see any success so far. please help me solving this problem as we r in the middle of testing cycle.
Thanking you all for your quick response and support all the time.
Kind Regards,
Sanjeev

Hi Sanjeev,
I believe you are opening the .csv file again after saving it. In this case the initial 0 in single digit month (say 02/2010) is getting changed to 2/2010 and the resulting file is not readable to the system. Just do not open the file after you have entered data in the .csv file and saved and closed it. If required, open the file in notepad, but not in excel in case you want to re-check the data.
Hope this helps.
regards,
biplab

BW Data Load error due to special char's

Similar Messages

Maybe you are looking for