BW database table to infoobject

Hi,
I have created a table in bw and filled up the data......
From this table i would like to add the data to infoobject....
how to assign BW Database table to InfoObject....
Plz answer its an urgent.
Anjali

Hi,
If you want to load data into InfoObject (Master data) from BW itself.
1. Then create Generic DataSource in RSO2 in BW
2. Select DS type as Master Data.
3. Select datasource based on Table or View & mention this table name.
And use this datasource for loading data.
Regards
SS

Similar Messages

List Database Table Infoprovider, InfoObject, Flag Authorization Relevant

Dear Expert,
Im working with SAP BI 2004s user management & authorization. I have several objects that Ill have check. I dont like check one by one, I like to check for the SE16 transaction, for this reason, I need to know what is the database table have content Infoprovider by InfoObject (Characteristics) which each have the flag authorization relevant.
Moreover, in the same idea, which database has content Queries by Infoprovider which authorization variable?
Thank for all,
Luis

For your first question:
In addition to be above mentioned table, RSDCUBEIOBJ will give the information about Infoprovider and all the Infoobjects within this infoprovider.
1. Find all the authorization relevant Infoobjects from RSDCHA table and copy them.
2. In the table RSDCUBEIOBJ, paste all the Infoobjects obtained from 1 in the field "Infoobject". The result will be list of Infocubes and their corresponding authorization relevant Infoobjects.

Populate 2 infoobjects from One database Table

Hi,
I have two infoobjects INOBJ1 & INOBJ2 & one database table TABLE1(on SAP systems connected via UDI) having fields F1 F2 & description D1.
I would like to extract data & populate either INOBJ1 or INOBJ2 with F2,D1 data based on field F1.
Please let me know the fastest & easiest way to do this.
Thanks & warm regards,
Sunil

Hi sunil,
Write piece of ABAP code based on what condition you want..to fetch the field F2 from table1..
Check the standard generic extractor for template..
your case..
select F2 D1 from table1...where F1 = "condiiton"..
Regards
Manga(Assign points)
Message was edited by: Manga

RELATIONAL DATABASE TABLES IN SAP BW

hi
friends please give me the information regarding the RELATIONAL DATABASE TABLES IN SAP BW?

Hi,
See the tables.
InfoObjects Table:
RSDIOBJ Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
InfoCube Tables:
RSDCUBE Directory of InfoCubes
RSDCUBET Texts on InfoCubes
DSO Tables:
RSDODSO Directory of all ODS Objects
RSDODSOT Texts of all ODS Objects
PSA Table:
RSTSODS Directory of all PSA Tables
For reports:
RSRREPDIR
Thanks & Regards,
Sathish

Hello, is it possible to model an Infocube like a flat database table?

Hello,
is it possible to model an Infocube like a flat database table? I know usually a DSO is a flat database table.
Does anyone have experience with this issue?
Best regards
Gerd

Hello,
my requirement is to enrich Infoobjects in a planning cube that they meet certain requirements regarding the combinations: I have to make a manual data entry layout where users can plan on all possible characteristics combinations but those characteristics combinations must meet certain limitations.
I think I have to write the combination conditions in a DSO build an characteristic relationship function of type exit that accesses the table of the DSO
Then I think I get a data entry layout with all valid combinations.
What do you think?
Best regards
Gerd

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Help needed in reading text file to database table

Hello experts,
i have to insert the values from the column of this text file and insert them in my database table.
I have done a few file to table insertions but i'm having some trouble with this one.
Any suggestions plz
thanks
liab_report      1.00                                                                                                                              Page: 1
CDC:00537 / Mon Jun-21-2010                           LIABILITY REPORT                               Mon Jun-21-2010 22:06:26
DRAW    1; SET    1; November 7, 2009
                     TOTAL       PAID ON         TOTAL    EXPIRED ON         TOTAL    FRAC   OUTSTANDING
                   WINNERS      06/21/10          PAID      06/21/10       EXPIRED   ROUND
DIVISION          AMOUNT        AMOUNT        AMOUNT        AMOUNT        AMOUNT AMOUNT        AMOUNT
    Div1              0.00          0.00          0.00          0.00          0.00    0.00          0.00
    Div2         701040.00          0.00     660146.00          0.00      40894.00    0.00          0.00
    Div3        1444128.00          0.00    1330056.00          0.00     114072.00    0.00          0.00
    Div4        4711900.00          0.00    3889700.00          0.00     822200.00    0.00          0.00
                6857068.00          0.00    5879902.00          0.00     977166.00    0.00          0.00
DRAW    2; SET    1; November 14, 2009
                     TOTAL       PAID ON         TOTAL    EXPIRED ON         TOTAL    FRAC   OUTSTANDING
                   WINNERS      06/21/10          PAID      06/21/10       EXPIRED   ROUND
DIVISION          AMOUNT        AMOUNT        AMOUNT        AMOUNT        AMOUNT AMOUNT        AMOUNT
    Div1              0.00          0.00          0.00          0.00          0.00    0.00          0.00
    Div2         817817.00          0.00     817817.00          0.00          0.00    0.00          0.00
    Div3        1687405.00          0.00    1611742.00          0.00      75663.00    0.00          0.00
    Div4        3402100.00          0.00    3034200.00          0.00     367900.00    0.00          0.00
                5907322.00          0.00    5463759.00          0.00     443563.00    0.00          0.00
DRAW    3; SET    1; November 21, 2009
                     TOTAL       PAID ON         TOTAL    EXPIRED ON         TOTAL    FRAC   OUTSTANDING
                   WINNERS      06/21/10          PAID      06/21/10       EXPIRED   ROUND
DIVISION          AMOUNT        AMOUNT        AMOUNT        AMOUNT        AMOUNT AMOUNT        AMOUNT
    Div1              0.00          0.00          0.00          0.00          0.00    0.00          0.00
    Div2         779933.00          0.00     769804.00          0.00      10129.00    0.00          0.00
    Div3        1605548.00          0.00    1525104.00          0.00      80444.00    0.00          0.00
    Div4        4891700.00          0.00    4256800.00          0.00     634000.00    0.00        900.00
                7277181.00          0.00    6551708.00          0.00     724573.00    0.00        900.00

Plz clarify whether u want to load text file as a file into database or value of this text file into database. If values are to be loaded from this text file, U can better format the text file and use SQL loader to load the file into database. By formatting the database, i mean remove the unnecessary headings and characters, kee only the values to be loaded idelimited by ' '(space) or ','(comma). Create a control file and load it into the target table.

Displaying data in a tree from database table

Hi,
I want to display data from a database table (mara-matnr) in a tree structure. I went through the coding of SBSPEXT_HTMLB. There static data was taken in to wa_tab. But there I want to bring data from a database table into wa_tab. For this I created an internal table without headerline by taking a work area, now how can I move data from this work area to wa_tab record by record.
I hope some one might have worked on this. Plz help me....
Thanks in advance,
Ravindra.

Hi,
take a look at this <a href="/people/tomas.altman/blog/2004/12/13/sdn-blog-how-to-do-internal-tables-in-bsp which explains how internal tables work in ABAP OO.
Furthermore I think you want to do this:
insert <yourWorkarea> into table wa_tab.
A complete mara example would be:
data tab_mara type table of mara.
data wa_mara type mara.
select * from mara into table tab_mara.
*or you can use:
select * from mara into wa_mara.
insert wa_mara into table tab_mara.
endselect.
regards
Thomas

Sending data from SAP-BW ODS to R/3 database table/ view

I need to store data in an ODS in BW from an oracle view & then send this data to SAP R/3 so that the same data can be used by SAP-ABAP for making a BDC program ( i.e. finally storing it in some database tables in R/3).
Is it possible to do that?? if yes then how.....??

Hi,
Yes it is possibel.
Use SAP PI ie XI which will send the data from BW to ur R/3 system.
Check the links about XI.
XI is a Integration broker. U can integrate any systems using XI.
REDDY

Database Table cannot be found when Verify Database

Post Author: brentlaw
CA Forum: Other
I have been using CRW 7 for many years. I recently upgraded to XI (I have current version). I can open existing reports and create new reports fine. The problem is when I Verify Database I get an error message "The Database table <tablename here> cannot be found. Remove this table from the report".
This happens to all existing and new created reports. The data fills correctly when previewing. The problem only occurs when Verifying Database.
I thought it might be an ODBC driver problem so I upgraded my driver to v 3.525.1117. At least I think I upgraded it I did not check the version before I installed SQL 2005 SP2. After installing SP2 it seemed to be fine but a week later the problem came back. Mysterious eh?
I am trying to launch a report from VB6 using RDC and rpt file. I get logged in correctly but at .viewreport I get a generic error message. I am assuming the problem is related the the issue I raise in this forum post.

Post Author: brentlaw
CA Forum: Other
I fixed the problem. In CR XI Developer Designer window I opened up Database-SetDataSourceLocation. I noticed that in "Properties" the last item "Use DSN Default Properties": was set to True. I changed this value to False. Now this problem is solved.
I am Not using Windows Authentication I am using SQLServer authentication. In my code I was passing SQLServer Authentication credentials.
I opened up all of my CR 7 reports in CR XI and changed this setting on both the Main and the Subreort property in the SetDataSourceLocation dialog box and now all my reports work. I am a happy camper.
I don't know if this is a CR 7 conversion to CR XI only situation or not. Hope this information helps someone else.

Database table update issue

Hello experts, Need your Help...
I am trying to update database table using Update command. And I am doing COMMIT WORK AND WAIT. after the successful update.
But my code sometimes does not work and the table is not updated.
Sometimes the code works and sometimes not.. for the same data.
Can anybody think of any possible reason?
Thanks in advance,
--Kumail

Hello Guys,
Here is the code, here we have all the keys... as it updates correctly sometimes. But doesnt update sometimes... for same data...... I have added COMMITT and WAIT statements to solve this problem.... but no luck....
        UPDATE zfxx_bsr_data
            SET zfxxstatus_glr = zfxx_bsr_data-zfxxstatus_glr
            zfxxstatus_issue = zfxx_bsr_data-zfxxstatus_issue
                zfxxerdat_glr   = sy-datum
                zfxxuser_glr    = sy-uname
                zfxxremark_glr = zfxx_bsr_data-zfxxremark_glr
                zfxxertime_glr = sy-uzeit
              doc_ind         = w_doc_ind
              zfxx_attach_acc = w_zfxx_att_acc
          WHERE bukrs        EQ t001-bukrs
          AND   saknr        EQ zfxx_bsr_data-saknr
          AND   zfxxperiod   EQ zfxx_bsr_data-zfxxperiod
          AND   zfxxfield    EQ c_ba
          AND   zfxxfieldval EQ tgsb-gsber.
        IF sy-subrc EQ 0.
          WAIT UP TO 3 SECONDS.
          COMMIT WORK.
          WAIT UP TO 3 SECONDS.
        ENDIF.

Database table problem

hi expert,
I have one expert routine with insert command in it. While DTP are running I change the status request to green, but after that I run again and the system can not insert record to database table. I wait for along time and system can perform insert command again to this database table. But again if I change the status to green when DTP request have not finished, the system can not perform insert command. Is the database table is lock or what? and How can I perform insert command immediately after stopping process.

Hi bwaugh06
You may use a text edit control instead od table control and store the content in a field of type STRING: No space wasted if no data is there but you have unlimited length.
Regards,
Clemens

Database Table Modification!

Hi!
I want to change database table i.e for e.g a table contains 10 fields with data in database i want to add 3 more fields to that table so that the data should not be removed or changed & after i ve added the fields i want to insert records to the 3 fields i ve created to the corresponding record.
Can u pls tell me how to achieve this task.
Thanks

hi Rahul,
Do this way ...
Goto se11 and enter the name of the table in which you want to enter the fields,
enter the fields and if any error occurs just goto UTILITIES->DATABASE UTILITY-> ACTIVATE AND ADJUST DATABASE.....
Also see the links,
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
Regards,
Santosh

Can't drop database table objects on a EJB Diagram.

JDeveloper 10.1.3 EA.
When I drop a database table object on a EJB Diagram the error below occurs. Also dropping components from the Component Palette doesn't work. A wizard opens, but after completing that, nothing is on the EJB Diagram.
However, after dropping a table and a restart of JDeveloper, there is an empty 'tablename EJB' on the EJB Diagram, but a click with the mouse on it generates the same error as the drop did.
Simular errors occur with JDeveloper 10.1.2, so writing this I realize that this might be a database version problem. I'm using 9i! I'll try 10g and see what happens.
Message
BME-99003: An error occurred, so processing could not continue.
Cause
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
     at oracle.jdevimpl.xml.DescriptorNode.getWhitespaceHandler(DescriptorNode.java:349)
     at oracle.jdevimpl.xml.DescriptorNodeDomIO.load(DescriptorNodeDomIO.java:164)
     at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)
     at oracle.jdevimpl.xml.DescriptorNode.getNewDescriptorImpl(DescriptorNode.java:506)
     at oracle.jdevimpl.xml.DescriptorNode.getDescriptor(DescriptorNode.java:140)
     at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarNode.getOrionEjbJar(OrionEjbJarNode.java:145)
     at oracle.jdeveloper.ejb.BaseEjbModuleContainer.getOrionEjbJar(BaseEjbModuleContainer.java:476)
     at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJB21Handler.isAvailable(Unknown Source)
     at oracle.bm.diagrammer.ui.DropChooserPanel.populateOptions(Unknown Source)
     at oracle.bm.diagrammer.ui.DropChooserPanel.createComponents(Unknown Source)
     at oracle.bm.diagrammer.ui.DropChooserPanel.<init>(Unknown Source)
     at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.createPanel(Unknown Source)
     at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjects(Unknown Source)
     at oracle.bm.addinUtil.IDEAppContext$4.performAction(Unknown Source)
     at oracle.bm.diagrammer.LockMonitor.performLockedAction(Unknown Source)
     at oracle.bm.diagrammer.BaseDiagram.performDiagramLockedAction(Unknown Source)
     at oracle.bm.addinUtil.IDEAppContext.dropNavigatorNodeLater(Unknown Source)
     at oracle.bm.addinUtil.IDEAppContext$5.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Action
If further errors occur, you should restart the application.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message.
________________________________________________________________________________

Hi lisa, you've said that the problem does not occur in the 10.1.3 build but I have almost the same problem with the BME-99003 error message.
I used the same workaround "changing the regional settings from BE to US" and the BME-99003 problem disappears :-)
Here is the error message that I receive while I add a table into the EJBDiagram. I'm using
windows XP SP2
ADF Business Components     10.1.3.34.12
Java Platform     1.5.0_04
Oracle IDE     10.1.3.34.12
Struts Modeler Version     10.1.3.34.12
UML Modelers Version     10.1.3.34.12
Versioning Support     10.1.3.34.12
Abdelkrim BOUJRAF
Message
BME-99003: An error occurred, so processing could not continue.
Cause
The application has tried to de-reference an invalid pointer. This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
java.lang.NullPointerException
at oracle.jdevimpl.xml.DescriptorNode.getWhitespaceHandler(DescriptorNode.java:349)
at oracle.jdevimpl.xml.DescriptorNodeDomIO.load(DescriptorNodeDomIO.java:164)
at oracle.jdeveloper.xml.BindingIO.load(BindingIO.java:43)
at oracle.jdevimpl.xml.DescriptorNode.getNewDescriptorImpl(DescriptorNode.java:506)
at oracle.jdevimpl.xml.DescriptorNode.getDescriptor(DescriptorNode.java:140)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarNode.getOrionEjbJar(OrionEjbJarNode.java:145)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarHelper.findOrionEjbJar(OrionEjbJarHelper.java:82)
at oracle.jdeveloper.xml.oc4j.ejb.OrionEjbJarHelper.findOrCreateOrionEjbJar(OrionEjbJarHelper.java:73)
at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJBCommonHandler.processTableNodes(Unknown Source)
at oracle.jdeveloper.ejb.modeler.diagram.dropHandler.TableDropEJB21Handler.processTableNodes(Unknown Source)
at oracle.bm.typemodel.dropHandler.TableDropSubHandler.processDBObjectNodes(Unknown Source)
at oracle.bm.typemodel.dropHandler.DBObjectDropSubHandler.processObjects(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjectsImpl(Unknown Source)
at oracle.bm.diagrammer.dropHandler.AbstractChooserDropHandler.processObjects(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$4.performAction(Unknown Source)
at oracle.bm.diagrammer.LockMonitor.performLockedAction(Unknown Source)
at oracle.bm.diagrammer.BaseDiagram.performDiagramLockedAction(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext.dropNavigatorNodeLater(Unknown Source)
at oracle.bm.addinUtil.IDEAppContext$5.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Action
If further errors occur, you should restart the application.
Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message.

Database table 'e' is not accessible

Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible. Please ensure that this table exists and is accessible."
After a lot of research I understand the problem now. Weblogic is checking the cmp-fields at deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0". Some databases have no problem with such a select. My Solid database unfortunately does a full table scan on it. Having only some rows in the table b there is no problem at all, but I have more than 500.000 entries. :-(
My question: Is there a workaround? Can I somewhere specify the SQL - command for checking mapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.
Thanx in advance
Robert

Robert Jung wrote:
Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible.Please ensure that this table exists and is accessible."
>
After a lot of research I understand the problem now. Weblogic is checking the cmp-fieldsat deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0".
Some databases have no problem with such a select. My Solid database unfortunately does
a full table scan on it. Having only some rows in the table b there is no problem at all,
but I have more than 500.000 entries. :-(
>
My question: Is there a workaround? Can I somewhere specify the SQL - command for checkingmapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.Hi. All commercial quality DBMSes I know, are smart enough to evaluate constant search
criteria, and not to access all the rows if it's a-priori known that no rows will
qualify. I would ask 'Solid' for a fix.
However, you can generate our EJBs with the option of retaining the generated
JDBC code, which you could alter and recompile for your use. You might be able to
substitute some DatabaseMetaData call to getTableColumns() to get the same info...
Joe
Thanx in advance
Robert

BW database table to infoobject

Similar Messages

Maybe you are looking for