BW Datasource for R/3 Table

I have field "KNKLI" in table VBAK. I want to know the datasource that is bringing data from this field into BW. Is there a table that gives me this information in R/3? I need to be able to see any or all the datasources that are extracting data using this field.

HI,
Check the table ROOSFIELD in the R3 side, Just give the field name in the selection and excute you will get the Data sources names.
Khaja

Similar Messages

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

Standard Datasource for Excise related tables in R/3

Hi Experts,
    We are developing BI Reports for the Custom Reports in R/3 .
    In one of the ZReports in R/3 the data is coming from 12 tables.
    The data is coming from the tables EKBE,EKPO,EKKO,ADRC,MKPF,BKPF ,MAKT,
    J_1IPART1,J_1IPART2,J_1IEXCDTL,J_1IMOVEND,J_1IMTCHID.
    The tables J_1IPART1,J_1IPART2,J_1IEXCDTL,J_1IMOVEND,J_1IMTCHID are Excise Related.
    Please suggest me if any standard Datasource is available for these tables .
Regards,
Chakradhar

Hi,
There is no Standard DS for Excise.
I created the Generic Dss on those tables with delta enabled in my last project. And they are running successfully.
I created 2 DSs on the same table , one with delta enabled on Created date and another one with delta enabled on Changed date ( Wherever this field is there in the base table). And used Lower limit as 1 as safty delta so that I was able to do delta loads multiple times in a day.
Regards,
Anil Kumar Sharma .P

Need of the datasource for the CRM Table CRMD_MKTATTR_SET

Hi Experts,
I have a field name in CRM but I couldn't able to find out the datasource in which that field exists
CRM Field Name CRM Table Name
ATTRIBUTE_SET CRMD_MKTATTR_SET
Now I need the Datasource(DS) for the above mentioned field, so that I can do the extraction from CRM to BW.
And can anyone provide me the information fo how to find out the relavant Datasource in CRM for a particular field in CRM
Could anyone please help me in the above issues.
Thanking you in Advance.
ARUN

Hi Arun,
Duno whether this is what you need:
CAMP_TYPE CRM Marketing Planning - Campaign Type CRM_MKTPL_ATTR CAMP_TYPE:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/e98d3b24e50656e10000000a114084/frameset.htm
Alice

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

Relevant datasource for ANLA and ANLC tables?

Hi,
In breif these are the relevant tables
ANLA and ANLC , in this i can able to find the datasources for ANLC i.e, 0fi_aa_11, but my requirenet is to have both tables in one datasource. And more as far as my search there is no relevant datasource for ANLA table, if not how to acheive this?
Thanks in Advance
vas

Or else you can use two datasources for this purpose. Check here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/overview%252bbw%252bdelta%252bextraction
Thanks...
Shambhu

Datasource for Table MSKA

Dear Gurus,
Can someone help me in identifying the Datasource for the Table (MSKA) -(Sales order stock)??Am working on PP and i assume this table should be in one of the PP Datasources,but still am finding it hard to get the right DS.
manythanks
arun

Hi,
Try for 2LIS_03 datasources.
Cheers
Raj

Need you help !!! -- datasource field to ECC table mapping for 0material

Dear experts:
Recently we need to get a quick turnaround on the fields we would be bringing into BW through standard extractors for the tables MARC and MBEW. My idea is to look at those master data extractors like 0MATERIAL, 0PLANT and then try to find how fields in datasource mapped to ECC table.
So now I have 2 questions need your suggestion:
1. Is my way above feasible or any other way to get the fields mapping information for one specific table (Not datasource) ?
2. For 0MATERIAL_ATTR, I can neither find the table of origin for those datasource fields in SAP Library, nor in Tcode LBWE (Seems LBWE only for transaction data?). Can anybody give me a link for the fields mapping of 0MATERIAL and 0PLANT? or let me know where I can find those mapping information?
Any reply would be appreciated and thank you all in advance !
Best Regards
Tim

Well, the idea is simple. If you are using master data, then the easiest way is to find out which table is the master data stored. For eg. Material master data is stored in MARA table. Therefore 0MATERIAL_ATTR fetches data from the MARA table.
The next option is to check the function module.
1) Goto RSO2, and enter the data source name->display. The system wil throw a warning giving you the FM.
2) For eg. 0MATERIAL_ATTR will throw the error "DataSource 0MATERIAL_ATTR is extracted using functional module MDEX_MATERIAL_MD".
3)Go to SE37, and put the FM->display. Then go to the tables tab. You will see tables like BIW_MARA_S. The middle term is usually the table.
Another option is go to table RSGENFIELDMAP and put the field in the field selection. This would give the mapping.
Regards.

Datasource for the table EKKO,EKPO, EKBE, BKPF, BSEG

Hello Gurus,
I am having a requirement wher i need to create report for the fields coming from the above tables.
pls let me know if der is any such data source from which i can get data for all the tables EKKO,EKPO,EKBE,BKPF,BSEG.
If der is no single data source then how i have to approach for the same using the standard datasource.
and what should be the link info objects between them if iam going with the separate one.
Regards

Thanks for ur responses,
Is the Belnr in the EKBE table is same as the BELNR in BKPF table of Data source (0FI_GL_4) ???
When i cross verifed i found multible record in BKPF w.r.t EKBE belnr.
Whats the reason for this ? If i created a infoset by mapping the BELNR AND GJAHR of EKBE and BKPF. Do i get the correct record or i have to handle it by some exception.
Also pls let me know how the MM and FI flow related , I means once the MIRO ie billing document is created what happen in the FI side ??
pls update with ur suggestions.
regards

ESLL - Datasource for this table ESLL???

Hi gurus!
Somebody knows any datasource for ESLL table???
Thanks a lot!
BR

Hi Leticia,
No there is not unfortunately, suggested solution is to create a DB view on tables like ESKN,ESSR,ESLL,EKPO (SE11) so data can be linked up properly to Purchasing doc and then build a generic Datasource on top of that (RSO2).
Hope this helps.
Grtx
Marco

Datasource for new GL line items

Hi Experts,
From referring to previous forums, its been clear that to use FAGLFLEXA for line items, i have to create a generic datasource. Please confirm forllowing :
1) Is it still the case or does SAP suggests to use any other delivered datasource
2)If a generic datasource needs to be created, which is the best option to use from table/view, function module or infoset as FAGLFLEXA won't satisfy all the fields. Business need few purchasing table fields to be added.
3) Above requirement must support delta
Please advise as this is quite urgent. Points will be awarded upon helpful suggestions
Regards
Shanthi

For GL line item details, you surely can use SAP business Content datasource 0FI_GL_4 and the datatarget is 0FIGL_O02. The datasource is build on table BKPF and BSEG in R/3 which stores the line itme level data.
Also this is delta compatible.
For details, you may want to refer to link below:
http://help.sap.com/saphelp_nw04/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
Regards
Pankaj
********Assign pts if helpful

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

FS-CD / CRM - Datasource for Insurance Object

Hello Gurus,
Does anyone know of SAP Standard Datasource for Insurance Object.
Insurance Object is used in FS-CD and CRM.
The table where Insurance Object is stored is DIMAIOB and the tcode in ECC is INSODISP.
thanks in advance

Hi,
I involved FS-CD implementation very long back and that to not in depth, but I remenber, we used 99% custome defined DataSources only using Function Modules.
Check in the following links, you mayy get some information
http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/97834071adc65de10000000a155106/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/24/0d723521faee41e10000009b38f889/frameset.htm
http://www.sap.com/africa/industries/insurance/pdf/FSRI_Release_Notes_471_en.pdf
Thanks
Reddy

"No entry for BW_USER in table RSADMIN available"

Transaction "RSA1" -> "Source Systems" section. I right-click "BI" and choose "Create". I get the error:
"No entry for BW_USER in table RSADMIN available"
What does this mean and how do I resolve?
I did some searching. Someone recommended this: "rsa1->settings->global settings->glob settings". But I can't find "glob settings" or anything similar.
Also, I have one BI source system already defined, but I can't figure out a way to create a DataSource for it. I choose "Display DataSource tree", and when I right-click, I get "Replicate Tree Metadata" and "Replicate DataSources" but no option to create an application component or create a new Data Source. How do I do this?

Worked for me as well..
Thanks Srikanth
Reg
Mukesh

A question about the multiple source table for the logical table

Hi All,
I am to test, having two physical sources for an logical table, but it is failing as it is always getting data from only one table rather than two tables.
!http://picasaweb.google.com/KSivaUS/OracleForumQuestions#5433761212378087346!
Any suggestion or inputs would be appreciated.
Thanks
Siva

your 2 measure columns are in the same unique - low level??
your connections look good.
which is the result if you bring only the sales column at your report??is it the sum of the 2 datasources??
try to repass again all your bussiness model.or make an other one.
fisrt pass your fact with 2 sources and then your dimensions....
as i can see you have customer_dim,do both of your columns have the appropriate key to this dimension??try to make a physical connection from both fact sources to this dimension as well as for time...
if you do it in this way ,there is no possibility not to work
hope i helped...
http://greekoraclebi.blogspot.com/

BW Datasource for R/3 Table

Similar Messages

Maybe you are looking for