BW enhancement -- plz advice

Hi,
While doing the enhancement for BW using standard function module EXIT_SAPLRSAP_001 and INCLUDE ZXRSAU01 is it advisable to use the function module.
I mean if the extra field required by BW is derived using a Function Module then does it hamper performance against pulling it from a table…
Friends please advice…
Thanks,
sam

Hi Sam,
While extracting data from R/3 to BW that is the user-exit which will get triggered when you are extracting master data, that is SAP suggested User exit for enhancing the datasource for master data.
Reward Points if this helps,
Satish

Similar Messages

  • Billing document enhancement

    I have to add three new items in the "Billing document's" table control. The data from the table control in Tcode VF01 is written into the table VBRP. All the three fields are customer created fields, They have no previous data at all. But all the new details that are going to be created must be recorded in the table from now on. So we have to create these fields in the table too. All the Tcode for billing document VF01(Create), VF02(Change), VF03(Display) Should be updated to the same. How am i suppose to do it both on the screen and the table... If it relates to enhancement plz tell me the steps i need to follow.

    Hi,
          Put break point and try one of the following
    SDVFX007 User exit: Billing plan during transfer to Accounting
    SDVFX008 User exit: Processing of transfer structures SD-FI
    SDVFX009 Billing doc. processing KIDONO (payment reference number)
    SDVFX010 User exit item table for the customer lines
    SDVFX011 Userexit for the komkcv- and kompcv-structures
    V05I0001 User exits for billing index
    V05N0001 User Exits for Printing Billing Docs. using POR Procedure
    V60A0001 Customer functions in the billing document
    V60P0001 Data provision for additional fields for display in lists
    V61A0001 Customer enhancement: Pricing
    Regards

  • Help Plz i've blank LCD in Lenovo G530

    Help Plz i've blank LCD in Lenovo G530
    the unit is working and the power & wireless indicators is  on but the LCD is blank
    i've allready unpluged the battery and powered the unit with the charger only and plug the battery again but still have the same problem.
    so plz advice what to do ?????

    Try to plug in external monitor and look if anything shows. Then try to check monitor configuration. Maybe it is switched off...
    Regards,
    Publius
    Lenovo 3000 V200

  • Need advice regarding an interview

    Hi,
    Since everytime I had a confusion, it was resolved by this forum only, so now again I need ur support and advice.
    Actually, I'm a struggler seeking desperately for job of a junior/asst. DBA. I've done MCA(Master in Computer Application) and OCA (Oracle Certified Associate) DBA.
    Now in the next month I've to take the last exam (Performance Tuning) to be an OCP. Since I m a fresher in this field, I m not getting any job opportunity.
    I'd already discussed my problem on this forum and had got lots of precious advices which recharged and motivated me a lot.
    Now today I got an interview call from HCL company for the post of an 'asst.programmer' which is not the field I was looking for. But since I m getting an opportunity from a big company I m not able to resist it. Plz advice me of what should I do in such situation.
    Further,I m not in practice of the programming languages for a long time so I m not sure whether I'll get through the Interview or not. Plz suggest.The interview is tommorow.

    If you've got some knowledge of programming then at least it's a foot in the door and will allow you to gain experience.
    Likewise, going for the interview will give you experience of the interviews, even if you don't get the job.
    A good programmer has a good understanding of the way a database works, so the DBA skills you've already learnt will help you and, if you get the job, the programming will give you a good idea of how people need to use the database, so that too will support your DBA skills and you can eventually work up to the job opportunity you want.
    We all had to start somewhere. ;)

  • HT1937 i need to find out which carrier my 3GS hot plz help someone IMEI: 012265001470520

    hey guys,
    ehm.. i wanted to find out how im gonna find out which carrier my Iphone 3GS got.
    so if anyone can help me out plz do
    my IMEI: 012265001470520
    i read thats gonna be find out with the imei so i posted it
    plz advice me fast

    Ask whomever originally purchased the phone.  There is no reliable way to tell otherwise - certainly none of your fellow Apple users here can tell you.
    P.S. if you are in the USA and the iPhone was purchased in the USA, it has to be AT&T.

  • Need a advice...

    Guys I need some advice regarding Rooting of the device....My phone is just 1 month old right now, thats y I am not sure whether I shud root it or not...
    nd What are the risk associated with rooting
    Plz advice....

    why do you want to root your phone? is there an specific app that you want to root? which Android version and build number do you have?
    check this thread
    http://talk.sonymobile.com/thread/38251
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Plz help to deploy mapviewer on glass fish server

    hey all
    wll am in need of assistance for the below following configaration/deployment of mapviewer on (Oracle GlassFish Server 3.1.2.2 (build 5)).
    waht is the default userid and the password for the mapviewer i download this from otn and deployed on the above glass fish server.
    admin page is open through :4848/console and 8080/mapviewer
    plz advice.

    It's in the password.txt file and welcome1.txt
    change the passwords using resetPassword
    User is admin

  • Problem with Report on Multiprovider

    Hi All,
    I am getting key fig value more than the expected value in the report output, Report is on Multiprovider, I have checked in to cubes, values in the cubes and reports are same,
    I have checked in TR and UR there is no routines, But Data source is enhanced in the R/3 and extracting the data to BW.
    How to find why we are getting more values in the report   :?:
    Plz give some inputs to solve this problem.
    Thanks
    Sreeu

    Hi
    I have checked data in the Multiprovider, In the MP contain KF (No of days) values high (more then 365 days), that’s the reason am getting KF values high in the report,
    Actually report is used for analyzing the Premise (Char) values w, r to Number of days for one fiscal year, but report is showing Number of days more than the 365 days on one fiscal year .
    Can any one plz advice why we are getting No .of days more then 365 days?
    Thanks
    Sreenu

  • Printing barcode in HP laser jet  through smartform

    Hi folks,
    can i print barcode in HP laser jet P3005 PCL6 by using smartform???
    plz advice.
    regards
    smita

    Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
    I am attaching the list of BARCODE supported printers
    List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
    OSS NOTE : 8928
    Installation of new device types ********************
    Many device types are appended as a zip-attachment to this note.
    README.TXT contains information about these device types and codepages.
    README_UPLOAD.TXT contains information on how to import the device
    types.
    PRINTER DRIVERS AND DEVICE TYPES:
    In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
    If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
    If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
    At present, there are five SAPscript printer drivers. They include:
    for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
    for PostScript printers (PS level 2)
    for PRESCRIBE (for example, Kyocera FS-1500)
    for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
    for all other models.
    The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
    In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
    COMPATIBLE PRINTERS:
    Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
    LIST OF PRINTERS:
    This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
    The device types named in this list are supported in the standard R/3 System as of the release mentioned.
    If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
    Check related notes attached for addition information on printer supportin R/3.
    Related notes:
    Note 135894 contains information on printing labels on special label printers.
    Note 05196 contains information on printing bar codes with SAPscript
    Note 94233 contains information on printing MICR font with SAPscript
    Note 62178 contains information on device types for the Japanese version of the R/3 System.
    Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
    Note 98477 informs you on device types for printers by the manufacturer PSi.
    Note 107938 contains information on device types for printers by the producer Tally.
    Note 141719 contains information on device types for printers from the producer Printronix.
    Note 141914 contains information on device types for printers from the producer Lexmark.
    Note 153879 contains information on compatible printer models of producer EPSON.
    Note 154494 contains information on compatible printer models of producer Genicom.
    Note 199166 contains information on device types for printers from the producer Hewlett Packard.
    Note 214187 contains information on device types for printers from the producer Océ.
    Note 398236 contains information on device types for printers from the producer Sharp.
    Note 408189 contains information on device types for printers from the producer Konica Minolta.
    Note 436609 contains information on device types for printers from the producer Xerox.
    Note 458047 contains information on device types for printers from the producer Ricoh.
    Note 485240 contains information on device types for printers from the producer SAVIN.
    Note 485244 contains information on device types for printers from the producer NRG.
    Note 516687 contains information on device types for printers from the producer Lanier.
    Note 516669 contains information on device types for printers from the producer Gestetner.
    Note 878109 contains information on device types for printers from the producer Danka.
    ASCIIPRI
    Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
    COMPU960
    Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
    DECLA75P
    Device type for the DEC line printer DEC LA75 Plus.
    DECLN07
    Device type for the DEC laser printers LN07 and DECLaser 1100.
    HP256X
    Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
    HP2930
    Device type for Hewlett-Packard's HP2930 line printer.
    HPDJ500
    Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
    HPLJIIID
    Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
    HPLJSTND
    Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
    HPLJ_II
    Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
    KYOF1000
    Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
    KYOF1200
    Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
    MT600
    Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
    MT600GER
    Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
    MT600NDA
    Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
    OKI341
    Device type for the OKI Microline 3410 line printer.
    POSTSCPT
    Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
    S4440XTG
    Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
    SAPWIN
    Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
    Important Note:
    As of Release 3.0E, you can use SAPWIN to:
    Print proportional fonts and lines/boxes in SAPscript
    Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
    See Note 39031.
    SWIN
    Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
    In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
    SNI4009
    Device type for the Siemens-Nixdorf SNI 4009 line printer.
    SNI4010
    Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
    SNI9014
    Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
    SNIZD13
    Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
    CIP1000
    Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
    EPESCP
    Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
    EPESCP2
    Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
    EPESCP9
    Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
    EPLQ550
    Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
    HP2300
    Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
    HPLJ4
    Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
    IBM239X
    Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
    IBM4226
    Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
    IBM4232
    Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
    IBM6408
    Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
    IBMAFP
    Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
    Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
    IBMAFP is for use on R/3 UNIX and Windows NT platforms.
    IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
    IBMAFP3
    Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
    Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
    IBMAFP3 is for use on UNIX and Windows NT platforms.
    IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
    IBMSCS
    Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
    LX4039
    Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
    KYOFS150
    Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
    NECP30
    Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
    NECP72
    Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
    NECPW
    Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
    SNI4011
    Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
    SNI20XX8
    Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
    MT2033
    Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    MT2045
    Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    DEVICE TYPES NEW TO RELEASE 3.1G:
    HPDJ660
    Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
    HPDJ850
    Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
    HPLJ5SI
    Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
    MT6045
    Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
    Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
    NEW DEVICE TYPES IN RELEASE 3.1H:
    MT691
    Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
    NEW DEVICE TYPES IN RELEASE 3.1I:
    SAPWIN5
    Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
    DEVICE TYPES IN RELEASE 4.0A:
    HPLJ5
    Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
    Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
    I2HP4
    Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
    I2SWIN
    Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
    SAPlpd 32 bit version, from 4.00
    Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
    R/3 Release 3.0E or higher
    Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
    I7SWIN
    Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
    SAPlpd 32 bit as of Version 4.00
    MS Windows NT 4.0 or Greek Windows 95
    R/3 Release 3.0E or newer
    Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
    NEW DEVICE TYPES IN RELEASE 4.5A:
    HPLJ4000
    Device type for the Hewlett Packard LaserJet 4000 printer and
    related models such as LaserJet 5000, 8000, 8100 and 8150.
    HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
    Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
    I9HP4
    Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
    KYOFS170
    Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
    Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
    POST2
    New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
    Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
    NEW DEVICE TYPES IN RELEASE 4.6A:
    IXLINK
    Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
    OCR-A and OCR-B fonts as well as bar codes are supported.
    NEW DEVICE TYPES IN RELEASE 4.6C:
    HPLJ8000
    Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
    Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
    HPLJ1100
    Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
    Device type HPLJ1100 can only be used in Releases as of 4.6C.
    I9SWIN
    Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
    SAPlpd 32 bit as of version 4.00
    MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
    R/3 Release 3.0E or newer
    Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
    IBMNP
    Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
    Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
    NEW DEVICE TYPES IN RELEASE 6.10:
    IBMIP12
    Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP21
    Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP32
    Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP2K
    Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP60
    Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBMIP70
    Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
    IBM4247
    Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
    Attention: Please follow note 396462 when installing the printer.
    NEW DEVICE TYPES IN RELEASE 6.20:
    IBM6400
    Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
    Attention: Please follow note 396462 when installing the printer.
    HP1200
    Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
    HP1200 is compatible with all releases from 4.0A.
    HP2200
    Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
    HP2200 is compatible with all releases from 4.0A.
    HP2250
    Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
    HP2250 is compatible with all releases from 4.5B.
    Attention: Business Inkjet 2200 is not compatible with HP2250.
    HP2500
    Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
    HP2500 is compatible with all releases from 4.0A.
    HP3200
    Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
    HP3200 is compatible with all releases from 4.0A.
    HP4100
    Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
    HP4100 is compatible with all releases from 4.0A.
    HP4550
    Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
    HP4550 is compatible with all releases from 4.5A.
    HP8150
    Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
    HP8150 is compatible with all releases from 4.0A.
    HP8550
    Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
    HP4550 is compatible with all releases from 4.5A.
    HP9000
    Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
    HP9000 is compatible with all releases from 4.0A.
    NEW DEVICE TYPES IN RELEASE NW04:
    BRHL
    Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
    OCR-A and OCR-B fonts as well as bar codes are supported.
    BRHL is compatible with all releases from 4.5A.
    IP2085
    Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
    IP2085 is compatible with all releases 4.5A and higher.
    IP2085P
    Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
    IP2085P is compatible with all releases 4.5A and higher.
    IP2105
    Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
    IP2105 is compatible with all releases 4.5A and higher.
    IP2105P
    Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
    IP2105P is compatible with all releases 4.5A and higher.
    LEXT622
    Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
    LEXT622 is compatible with all releases 4.5A and higher.
    LEXW820
    Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
    LEXW820 is compatible with all releases 4.5A and higher.
    LEX4227P
    Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
    OCR fonts and barcode printing from SAP are not supported.
    LEX4227P is compatible with all releases.
    I5LEX
    Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
    OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
    I5LEX is compatible with all releases 4.0A and higher.
    CNLX522
    Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
    CNLX522 is compatible with all releases 4.0A and higher.
    JPLX522
    Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
    JPLX522 is compatible with all releases 4.0A and higher.
    KPLX522
    Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
    KPLX522 is compatible with all releases 4.0A and higher.
    TWLX522
    Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
    TWLX522 is compatible with all releases 4.0A and higher.
    HP5000
    Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
    HP5000 is compatible with all releases from 4.0A.
    HP23
    Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
    HP23 is compatible with all releases from 4.5A.
    HP3000
    Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
    HP3000 is compatible with all releases from 4.5A.
    HP4300
    Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
    HP4300 is compatible with all releases from 4.5A.
    HP4600
    Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
    HP4600 is compatible with all releases from 4.5A.
    HP5100
    Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
    HP5100 is compatible with all releases from 4.5A.
    HP5500
    Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
    HP5500 is compatible with all releases from 4.5A.
    HP9500
    Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
    HP9500 is compatible with all releases from 4.5A.
    I2HPPS
    Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
    I2HPPS is compatible with all releases as of 4.0A.
    Barcode printing and OCR fonts are not supported.
    CAN105
    Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
    CAN105 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN22
    Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
    CAN22 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN5
    Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
    CAN5 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CAN85
    Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
    CAN85 is compatible with all releases as of 4.5A.
    OCR-fonts are supported, barcode printing is not supported.
    CN105PS
    PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
    CN105PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN22PS
    PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
    CN22PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN5PS
    PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
    CN5PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CN85PS
    PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
    CN85PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CAN400
    PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
    CAN400 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN400PS
    PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
    CN400PS is compatible with all releases as of 4.5A.
    OCR-fonts and barcode printing is not supported.
    CANC32
    PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
    CANC32 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
    ARM205
    PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
    ARM205 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM276
    PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
    ARM276 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM450
    PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
    ARM450 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARM550
    PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
    ARM550 is compatible with all releases as of 4.5A.
    OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
    ARC262P
    PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
    OCR fonts are not supported.
    CAN2220
    PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
    CAN2220 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN2220P
    PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
    CN2220P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CAN5020
    PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
    CAN5020 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CN5020P
    PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
    CN5020P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC3100
    PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
    CNC3100 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC31PS
    PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
    CNC31PS is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC3220
    PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
    CNC3220 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC322P
    PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
    CNC322P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC6800
    PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
    CNC6800 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is not supported.
    CNC68PS
    PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
    CNC68PS is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC31E
    PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
    CNC31E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC31EP
    PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
    CNC31EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC322E
    PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
    CNC322E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC322EP
    PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
    CNC322EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC68E
    PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
    CNC68E is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CNC68EP
    PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
    CNC68EP is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    CN2270
    PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
    CN2270 is compatible with all releases as of 4.5A.
    OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
    CN2270P
    PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
    CN2270P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcode printing are not supported.
    DL3100
    PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
    DL3100 is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL3100P
    PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
    DL3100P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL5100
    PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
    DL5100 is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    DL5100P
    PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
    DL5100P is compatible with all releases as of 4.5A.
    OCR-fonts and Barcodes are not supported.
    HP3700
    Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
    HP3700 is compatible with all releases as of 4.5A.
    HPBI23
    Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
    HPBI23 is compatible with all releases as of 4.0A.
    HP9055
    Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
    HP9055 is compatible with all releases as of 4.5A.
    HP9065
    Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
    HP9065 is compatible with all releases as of 4.5A.
    I7HP4
    Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
    I7HP4 is compatible with all releases as of 4.6B.
    HP4250
    Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
    HP4250 is compatible with all releases as of 4.5A.
    HP1160
    Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
    HP1160 is compatible with all releases as of 4.5A.
    HP1320
    Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
    HP1320 is compatible with all releases as of 4.5A.
    HP2430
    Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
    HP2430 is compatible with all releases as of 4.5A.
    HP3030
    Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
    HP3030 is compatible with all releases as of 4.5A.
    HP4650
    Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
    HP4650 is compatible with all releases as of 4.5A.
    HP5550
    Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
    HP5550 is compatible with all releases as of 4.5A.
    HP9850
    Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
    HP9850 is compatible with all releases as of 4.5A.
    HPLJ9050
    Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
    HP9050 is compatible with all releases as of 4.5A.
    HPOJ9130
    Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
    HPOJ9130 is compatible with all releases as of 4.0B.
    HP4345
    Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
    HP4345 is compatible with all releases as of 4.5B.
    HP9040
    Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
    HP9040 is compatible with all releases as of 4.5B.
    HP9050
    Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
    HP9050 is compatible with all releases as of 4.5B.
    HP9500M
    Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
    HP9500M is compatible with all releases as of 4.5B.
    IP2060
    Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2060 is compatible with all releases 4.5A and higher.
    IP2060P
    Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
    IP2060P is compatible with all releases 4.5A and higher.
    IP2075
    Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2075 is compatible with all releases 4.5A and higher.
    IP2075P
    Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2075P is compatible with all releases 4.5A and higher.
    IP2090
    Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2090 is compatible with all releases 4.5A and higher.
    IP2090P
    Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2090P is compatible with all releases 4.5A and higher.
    IP2105E
    Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2105E is compatible with all releases 4.5A and higher.
    IP2105EP
    Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
    IP2105EP is compatible with all releases 4.5A and higher.
    OKI6100
    Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI6100 is compatible with all releases as of 4.5A.
    OKI8300
    Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
    OKI8300 is compatible with all releases as of 4.5A.
    OKI9500
    Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI9500 is compatible with all releases as of 4.5A.
    OKI4350
    Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI4350 is compatible with all releases as of 4.5A.
    OKI5400
    Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI5400 is compatible with all releases as of 4.5A.
    OKI6300
    Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
    OKI6300 is compatible with all releases as of 4.5A.
    SML1451, SML1451

  • Variable Values in BADI's

    Hello All
    We have a requirement where we need to pass the value of a characteristic variable entered by the user to a cutomer exit variable and based on that need to perform a validation and return back the same value if it is correct else to return the blank/null value.
    Can anyone plz advice how can I achieve it ?
    Regards
    Ashish

    Hi Ashish,
    Please go through the following BAdi PDF:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f05700a6-23e2-2910-b48a-c58392764dda
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409fa539-30e2-2910-7a8e-80279d09893e
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
    BADi Enhancement:
    [Enhancement in BW]: How to use BaDI : RSU5_SAPI_BADI
    Implementing BADIs:
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/content.htm
    goto Tcode se19, give the implementation name and write a code as per yr field enhancement , save it then it will be serving as a badi which u can use

  • Business Contents

    Iam having a reporting requirement, having fileds vendor no(0vendor), PO number(EKPO-EBELN), Item no.(EKPO-EBELP),Material No.(0material), Material Description(MAKT-MAKTX), Tracking no(EKPO-BEDNR),Order quantity(0 PO_QTY (OR) 0ORDER_QUAN), Received Quantity(0GR_QTY), Date Received ( ?), Price(0NETPRICE).
    I found these fields for infocube Purchasing data 0PUR_C01 and Infosource  2LIS_01_ITM.
    Could u plz advice me the infoobjects I got correct r not and some info. Regarding the other infoobjects which I couldn’t able to find it.
    Thanks In advance.
    Cheers.

    Hello Robyn,
    Please search for below BC cube and infosource in Business Content section on help.sap.com.I am sending the link below..
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    I think it will surely have PO number,Item number etc in it.
    If u see that some required infoobjects arent in the std one,u may have to enhance the cube.
    Search in other BC cubes to see which suitable infoobjects u can use.
    Copy out the BC cube and enhance the copy.Name the copy as 'Z(BC cube tech name)'.
    cheers,
    Vishvesh

  • User exit to check vendor tax type in tcode FB60

    Dear All,
    i need o create an user exit for FB60  check the vendor tax types .
    Plz advice.
    regards
    siva

    Hi,
    check these..
    Enhancement/ Business Add-in            Description
    Enhancement
    SAPLF051                                Workflow for FI (pre-capture, release for payment)
    RFKORIEX                                Automatic correspondence
    RFEPOS00                                Line item display: Checking of selection conditions
    RFAVIS01                                Customer Exit for Changing Payment Advice Segment Text
    FEDI0001                                Function Exits for EDI in FI
    FARC0002                                Additional Checks for Archiving MM Vendor Master Data
    F180A001                                Balance Sheet Adjustment
    F050S001                                FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002                                FIDCC1: Change IDoc/do not send
    F050S003                                FIDCC2: Change IDoc/do not send
    F050S004                                FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005                                FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006                                FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007                                FIDCCH Outbound: Influence on IDoc for Document Change
    Business Add-in
    FBAS_CIN_MF05AFA0                       EWT - Downpayment Clearing - Tax transfer for CIN
    FISPLIT                                 Online Split: Cash Discount, Exchange Rate Differences
    FI_AUTHORITY_ITEM                       Extended Authorization Check for Document Display (FB03)
    FI_DOC_DISP_LI                          Diversion to Document Items (FB03)
    FI_FB08_SUBST_BUDAT                     FB08: Check Posting Date for Reversal of FI Doc. with FB08
    FI_GET_INV_PYMT_AMT                     BAdI for determining the payment amount for an invoice
    FI_HEADER_SUB_1300                      Screen Enhancement for Document Header SAPMF05A
    FI_PAYREF_BADI_010                      BAdI: Payment Reference Number
    FI_RES_ITEM_CURRENCY                    Document of Residual Item with Invoice Currency
    FI_TRANS_DATE_DERIVE                    Derive BKPF-WWERT from Other Document Header Data
    FVFZ                                    Replacement for Function Modules of Function Group FVFZ
    INVOIC_FI_INBOUND                       BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
    RFESR000_BADI_001                       BAdI for Own Processing of POR Item
    AC_QUANTITY_GET                         Transfer of Quantities to Accounting - Customer Exit
    ADJUST_NET_DAYS                         Change to Net Due Date
    BADI_ENJ_ALT_ADR                        Go to alternative vendor/customer data
    BADI_F040_SCREEN_600                    Screen Enhancement on F040 0600 Document Header
    BADI_FDCB_SUBBAS01                      Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
    BADI_FDCB_SUBBAS02                      Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
    BADI_FDCB_SUBBAS03                      Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
    BADI_FDCB_SUBBAS04                      Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
    BADI_FDCB_SUBBAS05                      Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
    BADI_MIRO_SPLT_ADD                      Append additional fields of ACCVS to ACCIT
    BADI_PRKNG_NO_UPDATE                    BAdI for Deactivating Update of Parked Documents
    F050S008                                FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
    FBAS_CIN_LTAX1F02                       Tax interface
    No.of Exits:         14
    No.of BADis:         26
    Arunima

  • Restriction during process order confirmation

    Hi,
    I want one validation during process order confirmation (mile stone) through t code COR6N  if resource capacity & shift intervals not maintained ( t code CRC2) then process order should not confirmed &  there should be error message. Plz advice how it is possible through customization.
    regards,
    sps.

    Dear shukla,
    Check with this User Exit,
    CONFPI02                                Process order confirmation: Customer spec. input checks 1
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection
    CONFPI04                                Process order conf.: Customer specific input checks 2
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
    If the above is not working then check with this BADI
    WORKORDER_CONFIRM at the time of saving,
    Regards
    S Mangalraj

  • How to write user exit for benefit..

    Hello All,
    I'm a HR consultant, with no technical background..
    At my client end, the configuration for ER contribution right now has x% of EE contribution and limit set to y% of base salary..
    They want to change their way of calculating this..There is some basic calculation as in first 1% - match will be 100% or dollar for dollar and 2%-6%-match will be 50% or .50 on the dollar..
    Got to know that we can use a user-exit in 'PBEN0014' SAP enhancement (SAP function 'EXIT_SAPLHRBEN00GENERAL_014').
    Plz advice how to proceed....

    hi ,
    'EXIT_SAPLHRBEN00GENERAL_014'
    1)Goto CMOD  tcode.
    2)Click on Utilites on Menu bar.
    3)Press Shift+F9, below in component name enter
    EXIT_SAPLHRBEN00GENERAL_014,
    4)F8 , then you will get Exit name PBEN0014
    Double Click  again Double Click you will get function
    FUNCTION EXIT_SAPLHRBEN00GENERAL_014.
    within this onel include file is there.
    INCLUDE ZXPBEU14.
    here you will write your Enhanc Code.
    Reward if , you got soln,
    Thanks.

  • USER-EXIT for post goods issue

    Hi all,
      after the delivery (VL01n)is created, i have to go for post goods issue.there is a push button named 'post goods issue' in VL02n.
    when i will press this button,all my data for this delivery ,should be downloaded to a text file.
    for this thing, i want to use a USER-EXIT.can u plz advice me the correct & specific user-exit for this requirement.it is very urgent. i have to it by today.
    your help is highly appreaciated.
    Regards
    pabitra

    Check the following
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (h
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of stock for POs for shipping due date list
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    Regards

Maybe you are looking for

  • Google map in director

    I have greated in flash a google map application that works perfectly. the markers are updated from an .xml file. When i import the .swf in Director 11.5 the control buttons appear, the buttons that let me change the map into "Map-Satellite-Terrain-H

  • How can I copy photos from the iphoto to my flash memory

    How can I copy photos from my iPhoto to the flash memory?  I had tried to drag the photos from the iphoto libraty to the flash memory but failed.

  • Approval Preview Graphic not syncing with Approval Text in SRM 4.0

    We are currently using SRM 4.0 in an extended classic setup and have the following issue. When creating a shopping cart/PO in SRM and looking at the approvals pending/processed or waiting the approval preview screen is different when choosing graphic

  • OracleDataAdapter returning wrong number of columns

    Hello All, I have an issue of an oracle data adapter not returning all columns in my select statement. When I use code similar to below, the data adapter returns 2 columns per row instead of 5. And they are out of order (ie, DataRow(0) could be colum

  • Images dont appear

    I recently installed Norton AntiVirus. And since then I've noticed that the images in any web browser dont appear. Some will but not all. For example the yahoo page will not finish loading or I will get question marks. If i am looking at images on a