BW Error : TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
While updating data from PSA of an infopackage i got a short dump called  TSV_TNEW_PAGE_ALLOC_FAILED.
So,I made the status of infopackage red and deleted the request.
Will the data be there in the PSA?
If yes,then how to upload the data from psa to datatarget.
There are two data targets maintained for this infopackage.
Do i need to schedule the infopackage again.
Please give me the correct solution.
Its very urgent.

Hi,
this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
Now,
if it is a delta,
then you have to make sure that the techynical status is red before delting the req.
Now if full
then delete the red req after forced red in both the data targets and re run the infopackage
contact your basis on this error if required
Hope this helps
Janardhan Kumar

Similar Messages

  • Run time error : TSV_TNEW_PAGE_ALLOC_FAILED in st22

    Hi All,
    we are getting runtime error : TSV_TNEW_PAGE_ALLOC_FAILED in production system. for this report rsppfprocess we have batch jobs so may be its running all the action definition and coming up with consuming more memory ? we already checked with basis but they are saying its rsppfprocess program issue. can you please guide me how to solve this issue.
    Jimmi.

    Hi Jimmi,
    The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
    because the program needed to expand an internal table, but is not available.
    When Extended Memory is used up, the process will go into PRIV mode
    as it starts using Heap Memory  (or vice-versa).  No other user will be able to use this work process while it is in PRIV mode.
    If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the work process will be freed.
    This seems to be a problem with loading of shared memory.
    Check value of parameter abap/shared_objects_size_MB in RZ11.
    Set the parameter to minimum 250 and increase it when necessary, as per SAP note 1281896. You must start the system newly so that the change becomes effective.
    Also take a look at SAP Note 1166259.
    Gervase

  • Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
    ShrtText
        No storage space available for extending an internal table.
    What happened?
        You attempted to extend an internal table, but the required space was
        not available.
    What can you do?
        Make a note of the actions and input which caused the error.
        To resolve the problem, contact your SAP system administrator.
        You can use transaction ST22 (ABAP Dump Analysis) to view and administer
        termination messages, especially those beyond their normal deletion
        date.
        Try to find out (e.g. by targetted data selection) whether the
        transaction will run with less main memory.
        If there is a temporary bottleneck, execute the transaction again.
        If the error persists, ask your system administrator to check the
        following profile parameters:
        o  ztta/roll_area            (1.000.000 - 15.000.000)
               Classic roll area per user and internal mode
               usual amount of roll area per user and internal mode
        o  ztta/roll_extension       (10.000.000 - 500.000.000)
    o  abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
           Extended memory area from which all users of an
           application server can satisfy their memory requirement.
    Error analysis
    The internal table "IT_18" could not be enlarged further. To allow
    error handling, the table had to be deleted before this log was
    created. So, if you branch to the ABAP debugger from the display
    of this log, the table will there be displayed with 0 rows.
    At the moment of the termination, the following data was
    determined for the respective internal table:
    Storage location: "Session memory"
    Row width: 1296
    Number of rows: 1166120
    Allocated rows: 1166120
    Newly requested rows: 8 (in 1 blocks)
               Last error logged in SAP kernel
    Component............ "EM"
    Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
    Version.............. 37
    Error code........... 7
    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
    Description.......... " "
    System call.......... " "
    Module............... "emxx.c"
    Line................. 1878
    How to correct the error
        The amount of storage space (in bytes) filled at termination time was:
        Roll area...................... 1709536
        Extended memory (EM)........... 408685712
        Assigned memory (HEAP)......... 1190561024
        Short area..................... " "
        Paging area.................... 57344
        Maximum address space.......... " "
        You may able to find an interim solution to the problem
        in the SAP note system. If you have access to the note system yourself,
        use the following search criteria:
        "TSV_TNEW_PAGE_ALLOC_FAILED" C
        "SAPLSBPT" or "LSBPTFXX"
        "DO_TBTCO_CONSISTENCY_CHECK"
        If you cannot solve the problem yourself and you wish to send
        an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
    System environment
    SAP Release.............. "640"
    Application server....... "ord-sapprd"
    Network address.......... "10.31.18.27"
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "16x Intel 80158"
    Character length......... 16 Bits
    Pointer length........... 32 Bits
    Work process number...... 0
    Kindly suggest me the options ASAP as this is happened in the production system.
    Thanks in advance,
    Suneetha Reddy

    Hi Sunnetha,
    SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
    I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
    DO_TBTCO_CONSISTENCY_CHECK.
    Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
    Which system you're using? ECC or BW??
    Note - parameter settings of BW largely varies from that of a ECC system.
    Thanks,
    Debasis.

  • Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction

    Hi,
    Anyone knows what the solution is to this problem:
    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
    |Short text                                                                                |
    |    No more storage space available for extending an internal table.                              |
    |What happened?                                                                                |
    |    You attempted to extend an internal table, but the required space was                         |
    |    not available
    |Error analysis                                                                                |
    |    The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could               |
    |     not be further extended. To enable                                                           |
    |    error handling, the table had to be delete before this log was written.                       |
    |    As a result, the table is displayed further down or, if you branch to                         |
    |    the ABAP Debugger, with 0 rows.                                                               |
    |                                                                                |
    |    At the time of the termination, the following data was determined for                         |
    |    the relevant internal table:                                                                  |
    |                                                                                |
    |    Memory location: "Session memory"                                                             |
    |    Row width: 1908                                                                               |
    |    Number of rows: 35912                                                                         |
    |    Allocated rows: 35912                                                                         |
    |    Newly requested rows: 8 (in 1 blocks)                                                         |
    |    Last error logged in SAP kernel                                                               |
    |                                                                                |
    |    Component............ "EM"                                                                    |
    |    Place................ "xxx"                   |
    |    Version.............. 37                                                                      |
    |    Error code........... 7                                                                       |
    |    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "                  |
    |    Description.......... " "                                                                     |
    |    System call.......... " "                                                                     |
    |    Module............... "emxx.c"                                                                |
    |    Line................. 1897                                                                    |
    |                                                                                |
    |    The error reported by the operating system is:                                                |
    |    Error number..... " "                                                                         |
    |    Error text....... " "                                                                         |
    |How to correct the error                                                                          |
    |    The amount of storage space (in bytes) filled at termination time was:                        |
    |                                                                                |
    |    Roll area...................... 6221152                                                       |
    |    Extended memory (EM)........... 1826778184                                                    |
    |    Assigned memory (HEAP)......... 2000035456                                                    |
    |    Short area..................... " "                                                           |
    |    Paging area.................... 73728                                                         |
    |    Maximum address space.......... 4294967295                                                    |
    |                                                                                |
    |    If the error occures in a non-modified SAP program, you may be able to                        |
    |    find an interim solution in an SAP Note.                                                      |
    |    If you have access to SAP Notes, carry out a search with the following                        |
    |    keywords:                                                                                |
    |                                                                                |
    |    "TSV_TNEW_PAGE_ALLOC_FAILED" " "                                                              |
    |    "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36"                                          |
    |    "FILL_BILLPLAN"                                                                               |
    |                                                                                |
    |    If you cannot solve the problem yourself and want to send an error                            |
    |    notification to SAP, include the following information:                                       |
    |                                                                                |
    |    1. The description of the current problem (short dump)                                        |
    |                                                                                |
    |       To save the description, choose "System->List->Save->Local File                            |
    |    (Unconverted)".                                                                               |
    |                                                                                |
    |    2. Corresponding system log                                                                   |
    |                                                                                |
    |       Display the system log by calling transaction SM21.                                        |
    |       Restrict the time interval to 10 minutes before and five minutes                           |
    |    after the short dump. Then choose "System->List->Save->Local File                             |
    |    (Unconverted)".                                                                               |
    |                                                                                |
    |    3. If the problem occurs in a problem of your own or a modified SAP                           |
    |    program: The source code of the program                                                       |
    |       In the editor, choose "Utilities->More                                                     |
    |    Utilities->Upload/Download->Download".                                                        |
    |                                                                                |
    |    4. Details about the conditions under which the error occurred or which                       |
    |    actions and input led to the error.                                                           |
    |                                                                                |

    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
    Short text
    No more storage space available for extending an internal table
    |What happened?
    |    You attempted to extend an internal table, but the required space was
    |    not available.
    |Error analysis                                                                                |
    |    The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
    |     not be further extended. To enable
    |    error handling, the table had to be delete before this log was written.                       |
    |    As a result, the table is displayed further down or, if you branch to                         |
    |    the ABAP Debugger, with 0 rows.                                                               |
    |                                                                                |
    |    At the time of the termination, the following data was determined for                         |
    |    the relevant internal table:                                                                  |
    |                                                                                |
    |    Memory location: "Session memory"                                                             |
    |    Row width: 1908                                                                               |
    |    Number of rows: 35912                                                                         |
    |    Allocated rows: 35912                                                                         |
    |    Newly requested rows: 8 (in 1 blocks)                                                         |
    |    Last error logged in SAP kernel                                                               |
    |                                                                                |
    |    Component............ "EM"                                                                    |
    |    Place................ "SAP-Server XXXX"                   |
    |    Version.............. 37                                                                      |
    |    Error code........... 7                                                                       |
    |    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "                  |
    |    Description.......... " "                                                                     |
    |    System call.......... " "                                                                     |
    |    Module............... "emxx.c"                                                                |
    |    Line................. 1897                                                                    |
    |                                                                                |
    |    The error reported by the operating system is:                                                |
    |    Error number..... " "                                                                         |
    |    Error text....... " "                                                                         |
    |                                                                                |
    |                                                                                |
    |                                                                                |
    |                                                                                |
    |How to correct the error                                                                          |
    |    The amount of storage space (in bytes) filled at termination time was:                        |
    |                                                                                |
    |    Roll area...................... 6221152                                                       |
    |    Extended memory (EM)........... 1826778184                                                    |
    |    Assigned memory (HEAP)......... 2000035456                                                    |
    |    Short area..................... " "                                                           |
    |    Paging area.................... 73728                                                         |
    |    Maximum address space.......... 4294967295                                                    |
    |                                                                                |
    |    If the error occures in a non-modified SAP program, you may be able to                        |
    |    find an interim solution in an SAP Note.                                                      |
    |    If you have access to SAP Notes, carry out a search with the following                        |
    |    keywords:                                                                                |
    |                                                                                |
    |    "TSV_TNEW_PAGE_ALLOC_FAILED" " "                                                              |
    |    "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36"                                          |
    |    "FILL_BILLPLAN"                                                                               |
    |                                                                                |
    |    If you cannot solve the problem yourself and want to send an error                            |
    |    notification to SAP, include the following information:                                       |
    |                                                                                |
    |    1. The description of the current problem (short dump)                                        |
    |                                                                                |
    |       To save the description, choose "System->List->Save->Local File                            |
    |    (Unconverted)".                                                                               |
    |                                                                                |
    |    2. Corresponding system log                                                                   |
    |                                                                                |
    |       Display the system log by calling transaction SM21.                                        |
    |       Restrict the time interval to 10 minutes before and five minutes                           |
    |    after the short dump. Then choose "System->List->Save->Local File                             |
    |    (Unconverted)".                                                                               |
    |                                                                                |
    |    3. If the problem occurs in a problem of your own or a modified SAP                           |
    |    program: The source code of the program                                                       |
    |       In the editor, choose "Utilities->More                                                     |
    |    Utilities->Upload/Download->Download".                                                        |
    |                                                                                |
    |    4. Details about the conditions under which the error occurred or which                       |
    |    actions and input led to the error.                                                           |
    |                                                                                |

  • Job CRM_TERRMAN_PROC_REL failed with error TSV_TNEW_PAGE_ALLOC_FAILED

    Hi Experts
    I have scheduled the CRM_TERRMAN_PROC_REL using INITIAL run to update the territory on accounts. In between INITAL run got failed/cancelled due to error "Internal session terminated with a run time error TSV_TNEW_PAGE_ALLOC_FAILED"..
    I have re-run the job using INITIAL again. Again Job ended up with same error.
    Is it ok to run job multiple time in INITIAL mode when Job gets failed in between?
    What could be the reason for the error Internal session terminated with a run time error TSV_TNEW_PAGE_ALLOC_FAILED"..?
    Thanks
    Chand

    Check if below sap note valid for your release.
    1933212 - Dump TSV_TNEW_PAGE_ALLOC_FAILED when running CRM_TERRMAN_PROC_REL
    Refer:
    1732395 - Memory allocation dump during territory relation processing
    2054266 - CRM Territory Relationship Build Program Performance issue

  • Report MB5L giving runtime error TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    While running the Report MB5L we are getting the runtime
    error "TSV_TNEW_PAGE_ALLOC_FAILED"
    We tried to schedule this report at non-peak hours but it again got
    terminated with same error.
    We are using 12GB of RAM.
    ztta/roll_area 6500000
    ztta/roll_extension 4000317440
    abap/heap_area_total 3001024512
    abap/heap_area_dia: 5000683008
    abap/heap_area_nondia: 2000000000
    em/initial_size_MB: 8192
    Please find the attached screenshot of ST22 dump analysis.
    Regards,
    Prashant
    Edited by: Prashant Shukla on Feb 25, 2009 11:10 AM

    Hi Juan,
    Pls find the details below-:
    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED                                                  
    Date and Time          24.02.2009 23:31:32                                                                               
    Short text                                                                               
    No more storage space available for extending an internal table.                              
    What happened?                                                                               
    You attempted to extend an internal table, but the required space was                         
        not available.                                                                               
    If the error persists, ask your system administrator to check the                             
        following profile parameters:                                                                               
    Error analysis                                                                               
    The internal table "\FUNCTION=MBEW_EXTEND\DATA=SEARCH_MBEWH_TAB[]" could not be               
         further extended. To enable                                                                  
        error handling, the table had to be delete before this log was written.                       
        As a result, the table is displayed further down or, if you branch to                         
        the ABAP Debugger, with 0 rows.                                                                               
    At the time of the termination, the following data was determined for                         
        the relevant internal table:                                                                               
    Memory location: "Session memory"                                                             
        Row width: 372                                                                               
    Number of rows: 354608                                                                        
        Allocated rows: 354608                                                                        
        Newly requested rows: 32 (in 1 blocks)                                                        
    How to correct the error                                                                               
    The amount of storage space (in bytes) filled at termination time was:                                                                               
    Roll area...................... 6203136                                                       
        Extended memory (EM)........... 4001304840                                                    
        Assigned memory (HEAP)......... 2000059568                                                    
        Short area..................... " "                                                           
        Paging area.................... 32768                                                         
        Maximum address space.......... 18446697160833538863                                                                               
    If the error occures in a non-modified SAP program, you may be able to                        
        find an interim solution in an SAP Note.                                                      
        If you have access to SAP Notes, carry out a search with the following                        
        keywords:                                                                               
    "TSV_TNEW_PAGE_ALLOC_FAILED" " "                                                              
        "SAPLMG27" or "LMG27F02"                                                                      
        "SEARCH_EXIT"                                                                               
    If you cannot solve the problem yourself and want to send an error                            
        notification to SAP, include the following information:                                                                               
    1. The description of the current problem (short dump)                                                                               
    To save the description, choose "System->List->Save->Local File                            
        (Unconverted)".                                                                               
    2. Corresponding system log                                                                               
    Display the system log by calling transaction SM21.                                        
           Restrict the time interval to 10 minutes before and five minutes                           
        after the short dump. Then choose "System->List->Save->Local File                             
        (Unconverted)".                                                                               
    3. If the problem occurs in a problem of your own or a modified SAP                           
        program: The source code of the program                                                       
           In the editor, choose "Utilities->More                                                     
        Utilities->Upload/Download->Download".                                                                               
    4. Details about the conditions under which the error occurred or which                       
        actions and input led to the error.                                                                               
    System environment                                                                               
    SAP-Release 700                                                                               
    Application server... "ecprdciclu"                                                            
        Network address...... "172.25.1.34"                                                           
        Operating system..... "Linux"                                                                 
        Release.............. "2.6.18-53.el5"                                                         
        Hardware type........ "x86_64"                                                                
        Character length.... 16 Bits                                                                  
        Pointer length....... 64 Bits                                                                 
        Work process number.. 19                                                                      
        Shortdump setting.... "full"                                                                               
    Database server... "isrecprdb2"                                                               
        Database type..... "ORACLE"                                                                   
        Database name..... "RPD"                                                                      
        Database user ID.. "SAPSR3"                                                                               
    Char.set.... "C"                                                                               
    SAP kernel....... 700                                                                         
        created (date)... "Nov 18 2008 20:45:39"                                                      
        create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"                                           
        Database version. "OCI_102 (10.2.0.2.0) "                                                                               
    Patch level. 185                                                                               
    Patch text.. " "                                                                               
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."                
        SAP database version. 700                                                                     
        Operating system..... "Linux 2.6"                                                                               
    Memory consumption                                                                               
    Roll.... 6203136                                                                               
    EM...... 4001304840                                                                               
    Heap.... 2000059568                                                                               
    Page.... 32768                                                                               
    MM Used. 5803144952                                                                               
    MM Free. 199241240                                                                               
    User and Transaction                                                                               
    Client.............. 610                                                                      
        User................ "SANCHIT"                                                                
        Language key........ "E"                                                                      
        Transaction......... " "                                                                      
        Transactions ID..... "49A289F286FA2313E1000000AC190122"                                                                               
    Program............. "SAPLMG27"                                                               
        Screen.............. "SAPMSSY0 1000"                                                          
        Screen line......... 6                                                                        
    Information on where terminated                                                                   
        Termination occurred in the ABAP program "SAPLMG27" - in "SEARCH_EXIT".                       
        The main program was "RM07MBST ".                                                                               
    In the source code you have the termination point in line 558                                 
        of the (Include) program "LMG27F02".                                                          
        The program "SAPLMG27" was started as a background job.                                       
        Job Name....... "RM07MBST"                      
    Regards,
    Prashant

  • Handle Runtime error: TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    In my programme, some times I end up with handling of lots of data in internal table. And this results in a dump.
    Category               ABAP Server Resource Shortage
    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
    Short text
        No more memory available to extend an internal table.
    I read few threads where they suggested to increase the internal memory of ths system. This is beyond my scope!
    Is there anyway I can catch this exception and stop the programme from executing further?
    Thanks in advance!
    Cheers
    Kiran

    Hello Kiran,
    TSV_TNEW_PAGE_ALLOC_FAILED is a not catchable error. It happens if a program exceeds the system boundaries, typically ~2 GB. Requesting so much memory is a strong indication for a flaw in the archtecture.
    Anyway these kind of errors require a change in the program or in the arguments given to them. In newer releases you may try S_MEMORY_INSPECTOR to analyse the endless need of memory. In older releases watch out for hughe internal tables in the ST22 dump.
    Regards
      Klaus

  • Runtime error TSV_TNEW_PAGE_ALLOC_FAILED on executing FAGLL03.

    Hi expert,
    I am getting Runtime error TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03.
    Please do the neeful.
    extented memeory--4,186,112
    and Heap Memory---1,960,171
    is configured.
    Os--HP-UX
    ECC 6.0 with oracle 10g
    server has 12 GB of RAM for the application instance and db instance is other server.
    Please
    Regards,
    vivek

    How to correct the error
        The amount of storage space (in bytes) filled at termination time was:
        Roll area...................... 5720752
        Extended memory (EM)........... 502780800
        Assigned memory (HEAP)......... 0
        Short area..................... " "
        Paging area.................... 122880
        Maximum address space.......... 4294967295
    and the paramters are.
    em/initial_size_MB---4092
    abap/heap_area_total---2000000000
    Please do the neeful.

  • Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED

    Hello friends,
    One of our Z-transactions (run in background) terminates with the runtime error TSV_TNEW_PAGE_ALLOC_FAILED. It runs successfully in another system. Of course memory settings are different in these systems so are the resources. I see in the affected system that parameter abap/heap_area_total is 2GB and parameters abap/heap_area_dia and abap/heap_area_nondia are only allocated 10MB each. Will there be any issue if we increase the above 2 parameters to 2GB each? If we do so, is the value allocated entirely at startup? Will it affect system performance? Please help.
    Thanks,
    Atul Lotlikar.

    Hi Atul,
    You can extend abap/heap_area_dia  and abap/heap_area_nondia to 2GB without any problem. 10MB was limitation for 32-bit AIX system. It only gets activated at the start up.
    However, you might want to have a look at em/initial_size_MB and ztta/roll_extension and try to increase them in the system where the problem is occurring.
    Also, two systems can have different amount of data volume which can explain why it runs in one system but not in other. Then you probably have to have a look at the Z-program itself.
    Hope it helps.
    Cheers !!
    Satya.
    PS: pls reward points if the answer was helpful...Thx.

  • Dump Error TSV_TNEW_PAGE_ALLOC_FAILED

    Hello All,
    We are getting this dump error, "TSV_TNEW_PAGE_ALLOC_FAILED" in our system.
    Short text
        No more storage space available for extending an internal table.
    What happened?
        You attempted to extend an internal table, but the required space was
        not available.
    OS AIX 5.3 64 bit
    Total Memory : 19 GB
    Total Swap Space : 45.91 GB
    The present values of the Profile parameters are,
    ztta/roll_area               - 3000320
    ztta/roll_extension       - 2000683008
    abap/heap_area_total  - 2000683008
    abap/heap_area_dia   - 2000683008
    abap/heap_area_nondia - 2000683008
    em/initial_size_MB           - 4092
    Kindly suggest,
    Thank You,
    Hasan

    Hello All,
    Thanks for your suggestions.
    As it is solman system, when i checked in SM04.
    Clnt     User     TCODE         Roll        Page      Mem(Total)     Mem(Priv.)
    1     SOLMAN_BTC          0     0      4.541.332     0
    1     SOLMAN_BTC          106.496     0      2.351.226     0
    1     SOLMAN_BTC          0     0      4.542.228     0
    1     SOLMAN_BTC          106.496     0      2.349.850     0
    1     USERA          106.496     40.96      2.508.076     0
    1     SMD_RFC          106.496     0     806.526     0
    1     USERA          106.496     0      8.917.850     0
    1     USERA          106.496     40.96      2.657.604     0
    1     SMDAGENT_SID          106.496     0     796.868     0
    1     SAPJSF          106.496     0     797.174     0
    1     USERB     SM04     352.256     98.304     11.117.992     0

  • Error TSV_TNEW_PAGE_ALLOC_FAILED caused by Function CHANGEDOCUMENT_READ

    Hi,
    I met the error TSV_TNEW_PAGE_ALLOC_FAILED when I call the function CHANGEDOCUMENT_READ.
    However, I only import a day , a table and a objectclass.
    CALL FUNCTION 'CHANGEDOCUMENT_READ'
          EXPORTING
            date_of_change             = c_day
            objectclass                = c_class
            tablename                  = c_table
            date_until                 = c_day
          TABLES
            editpos                    = i_editpos
          EXCEPTIONS
            no_position_found          = 1
            wrong_access_to_archive    = 2
            time_zone_conversion_error = 3
            OTHERS                     = 4.
    And when I debug it, I found it get very huge data(Both CDHDR and CDPOS have more than 500,000 records).
    Any suggestion will be helpful.
    Thanks,
    Franklin

    It looks like you will read to call it multiple times including the parameters TIME_OF_CHANGE and TIME_UNTIL, But this will be very time consuming.
    Check the documentation on these two parameters.
    Rob

  • Infoset query: Runtime Errors  TSV_TNEW_PAGE_ALLOC_FAILED

    Hi
    I have searched the forum and could not find suitable solution for my problem.
    We have an infoset query whose data source is an ABAP program and this is within our BW system only. Earlier it used to run perfectly fine. Recently, due to the increasing data, the load for the same is failing because of memory issue with runtime Error  TSV_TNEW_PAGE_ALLOC_FAILED . The dump occurs within 5-7 minutes of the data load. Once, we give some more filter selections in the infopackage, it runs fine.
    Our problem is neither we can increase the memory any further nor we want to give filter selections in the infopackage. Also, once we execute the ABAP program alone, it runs fine.
    Any help to solve this problem is appreciated.
    Cheers
    Chanda

    Hi,
    There are 3 ways to avoid this kind of problem:
    1) Reduce the data set - if it is possible to process this in smaller
    chunks then please do. This is an infoset query - please be more restrictive in your selections
    - please refer to note 354657.
    When you work with infosets that use tables or joins then it is
    possible to read packages (from Rel. 6.10 on). When you work with
    infosets that use logical databases or data retrieval programs than
    it is not possible to read packaged - by technical restrictions.
    That means that the query is executed completely taking all restrictions
    into account and the result is stored internally.
    2) Re-allocate some of the unused shared memories to program memory.
    A prime candidate for this is Roll and Page "In Memory" values.
    Alternative memory management via PHYSMEMSIZE generally overallocates
    roll and page memory. Please reduce the amounts allocated to the "in
    memory" part (see ST02) using the parameters below, for instance:
    rdisp/ROLL_MAXFS....Total amt of ROLL (Filesystem+SHM); in 8KB blocks
    rdisp/ROLL_SHM......Shared memory element of Roll; in 8KB blocks
    rdisp/PG_MAXFS......Total amt of Page (Filesystem+SHM); in 8KB blocks
    rdisp/PG_SHM........Shared memory element of Roll; in 8KB blocks
    =>Filsystem amt = MAXFS - SHM
    60MB or so each in memory should be sufficient.
    This should allow an extra 260Mb or so for process memory.
    Bear in mind however that Roll_SHM MUST be greater than 10% of
    Roll_MAXFS.
    This will not affect alternative memory management operation in any way.
    3) Reduce the em/global_area_MB from 128 to 64MB.
    These measures should give you ~320MB additionally per work process.
    To get even more - if there is a 64 bit machine in the landscape then
    redirect the load there.
    I would like for you to review the SAP Note 712664. Although
    the Notes 20527, 369726 and 166551 specifically refers to this
    and has helped resolve multiple performance problems.
    I hope it can help you.
    Fran.

  • APD returns ABAP Error: TSV_TNEW_PAGE_ALLOC_FAILED

    Hi
    I'm trying to run APD for a virtual cube.
    The design of the APD is as follow:
    1. Read a Query (FM of a virtual cube query)
    2. Filter the value
    3. Aggregate the value
    4. Output to text file
    If I run RSRT to read the query, I'm able to get the query, and it's returning 936,210 rows.
    However, when I run it from APD, it threw me the following errors:
    Error analysis
        The internal table "\CLASS=CL_RSCRMBW_BAPI\METHOD=GET_AXIS_DATA_V2\DATA=LT_MPP"
         could not be further extended. To enable
        error handling, the table had to be delete before this log was written.
        As a result, the table is displayed further down or, if you branch to
        the ABAP Debugger, with 0 rows.
        At the time of the termination, the following data was determined for
        the relevant internal table:
        Memory location: "Session memory"
        Row width: 652
        Number of rows: 5,027,712
        Allocated rows: 5,027,712
        Newly requested rows: 16 (in 1 blocks)
    Any idea what I can do to rectify this?
    Your advice is much appreciated.

    Hi,
    This is a problem related to memory of internal table.
    Please check the below links
    APD dump TSV_TNEW_PAGE_ALLOC_FAILED
    ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
    APD Dump: TSV_TNEW_PAGE_ALLOC_FAILED (but processed in database)
    Re: TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Hope this helps
    Thanks.

  • Modeler Error TSV_TNEW_PAGE_ALLOC_FAILED

    Hi Experts,
    We have a problem in BI Modeler (RSPLAN) when we try to execute a planning "function" type "forecast" method "average and moving average", the complete error is "No more storage available for extending an internal table; error key: RFC_ERROR_SYSTEM_FAILURE" our basis team already set memory parameters but the problem persists.
    This note "1149797 - Forecast: Termination TSV_TNEW_PAGE_ALLOC_FAILED" explain exactly the same error in st22, and the solution is Import Support Package 18 for SAP NetWeaver 7.0 BI, but we already have Support Package 20 SAPKW70020
    Any solution for this to help us ??

    Dear Martin and Matthias, thanks for your answers
    Sorry for my late answer, our basis team already checks the parameters and adjust them but now we have an a diferent and rare case. When we try to see the Modeler RSPLAN the browser shows NOTHING, just a blank page, we already try with IE6,IE7,IE8 and Firefox, but didnt works, all another applications works fine we can navigate into the bi portal fine just the URL http://:8000/sap/public/myssocntl?sap-client=250 dont work. (services in tcode SICF are OK and active)
    Rare case because it was working fine a few days ago, Suggestions with this issue ?? How can we redeploy the modeler for example ?
    Best Regards ¡¡¡

  • Error TSV_TNEW_PAGE_ALLOC_FAILED during Enchancement Pack 4 upgrade

    Hi Everyone,
    I'm at upgrade stage MAIN_SHDRUN/ACT_UPG which has been stuck here for the past couple of days. Finally errored out with:
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-40401INEAIPPE.TRN
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "19283900")
      Long text:
        Cause
          Program "&V#&", which was started in the background, was terminated
          abnormally.
        System Response
          The system created a job log for the terminated program.
        What to do
          Proceed as follows:
          Log onto the system in which the program was executed. The system is
          specified at the beginning of the transport log.
          Then call transaction SM37 to display the job log.
          Enter "&V#&" as job name and "DDIC" as user name.
          Restrict the starting date to the starting date specified in the
          transport log.
          For the other selection criteria, select only jobs with the status
          "cancelled". Then press <LS>Execute</>.
          A list of the jobs satisfying the selection criteria is displayed.
          You can display the log by pressing <LS>Job log</>.
          If the list contains several jobs, you can select the job with the ID "
          &V#&" with <LS>Display</> -> <LS>Job details</> or define further
          details for the selection criteria in the initial screen of transaction
          SM37.
          If the ABAP processor reports cancellation, double-clicking on the
          corresponding message in the job log branches to the display of the
          corresponding short dump.
    1AEPU320 See job log"RDDMASGL""19283900""TRN"
    1 ETP111 exit code           : "12"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60011INLSOFE.TRN
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "19283900")
      Long text: see above
    1AEPU320 See job log"RDDMASGL""19283900""TRN"
    1 ETP111 exit code           : "12"
    I checked ST22 and it is giving me dump TSV_TNEW_PAGE_ALLOC_FAILED. I read in many places to increase the virtual memory which I have to 85829MB, I've increased abap/heap_area_dia to 9221225472 & abap/heap_area_nondia 9221225472 but I continue to get the same errors. I'm not sure how to proceed past this and I'm running very behind schedule to get this installation completed. Any suggestions? Any help would be greatly appreciated. Thank you!

    Hi
    Pl tune the parameters of SAP , Oracle and OS in phased manner. It will definetly solve your problem.
    Pl note that change the memory related parameters in stage-1
    Regards
    Vimal

Maybe you are looking for

  • A/R Invoice - Create two outgoing payments

    Hi, We have issue here regading A/R Invoice Payment. The A/R Invoice is $100, the payment is $200 with Interact card (Direct account payment) with $100 cash return. The present does not work in B1; but will be developed in future release. The present

  • Impact of Field Status change in production

    Hello Experts, While doing MB1c intial stock upload i got an error that "Fld selection for mvmt type 561/acct 230000 differs for Ext GA amount in LC(023). I found that the feild Ext GA amount in LC is made optional for mvnt type 561. For gl 230000 th

  • Device not recognized in itunes

    After latest update my idevices are not being recognized by itunes. I have reset both devices and my mac mini I have used an apple cable to sync and approved both devices then they just dont show up but bpth show a charge. I have an ipad mini and an

  • Final Cut Studio 2 with Leopard and Quick Time 7.3

    I tried to upgrade to Leopard and Quick Time 7.3 early part of November and had numerous issues with Final Cut Pro. I had to revert back to 10.4.10 and quick time 7.2. Based on several postings on the discussion board, many others had the same issues

  • CTAS using dbms_metadata.get_ddl for Partitioned table

    Hi, I would like to create a temporary table from a partitioned table using CTAS. I plan to use the following steps in a PL/SQL procedure: 1. Use dbms_metadata.get_ddl to get the script 2. Use raplace function to change the tablename to temptable 3.